ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('1_28-01_022_ASM','2006-05-04T',('C.Hensel'),(''),
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2005070',
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2005070','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#1=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2=DIRECTION('',(0.E0,0.E0,1.E0));
#3=DIRECTION('',(1.E0,0.E0,0.E0));
#4=AXIS2_PLACEMENT_3D('BC_0',#1,#2,#3);
#5=DIRECTION('',(1.E0,0.E0,0.E0));
#6=VECTOR('',#5,1.13E2);
#7=CARTESIAN_POINT('',(-5.65E1,0.E0,0.E0));
#8=LINE('',#7,#6);
#12=CARTESIAN_POINT('',(-5.35E1,5.35E1,0.E0));
#13=DIRECTION('',(0.E0,0.E0,1.E0));
#14=DIRECTION('',(2.131628207280E-14,1.E0,0.E0));
#15=AXIS2_PLACEMENT_3D('',#12,#13,#14);
#17=DIRECTION('',(0.E0,-1.E0,0.E0));
#18=VECTOR('',#17,1.07E2);
#19=CARTESIAN_POINT('',(-5.65E1,5.35E1,0.E0));
#20=LINE('',#19,#18);
#21=CARTESIAN_POINT('',(-5.35E1,-5.35E1,0.E0));
#22=DIRECTION('',(0.E0,0.E0,1.E0));
#23=DIRECTION('',(-1.E0,0.E0,0.E0));
#24=AXIS2_PLACEMENT_3D('',#21,#22,#23);
#26=DIRECTION('',(1.E0,0.E0,0.E0));
#27=VECTOR('',#26,1.07E2);
#28=CARTESIAN_POINT('',(-5.35E1,-5.65E1,0.E0));
#29=LINE('',#28,#27);
#30=CARTESIAN_POINT('',(5.35E1,-5.35E1,0.E0));
#31=DIRECTION('',(0.E0,0.E0,1.E0));
#32=DIRECTION('',(0.E0,-1.E0,0.E0));
#33=AXIS2_PLACEMENT_3D('',#30,#31,#32);
#35=DIRECTION('',(0.E0,1.E0,0.E0));
#36=VECTOR('',#35,1.07E2);
#37=CARTESIAN_POINT('',(5.65E1,-5.35E1,0.E0));
#38=LINE('',#37,#36);
#39=CARTESIAN_POINT('',(5.35E1,5.35E1,0.E0));
#40=DIRECTION('',(0.E0,0.E0,1.E0));
#41=DIRECTION('',(1.E0,-1.894780628694E-14,0.E0));
#42=AXIS2_PLACEMENT_3D('',#39,#40,#41);
#44=DIRECTION('',(-1.E0,0.E0,0.E0));
#45=VECTOR('',#44,1.07E2);
#46=CARTESIAN_POINT('',(5.35E1,5.65E1,0.E0));
#47=LINE('',#46,#45);
#48=CARTESIAN_POINT('',(-5.E1,5.E1,0.E0));
#49=DIRECTION('',(0.E0,0.E0,-1.E0));
#50=DIRECTION('',(-1.E0,0.E0,0.E0));
#51=AXIS2_PLACEMENT_3D('',#48,#49,#50);
#53=CARTESIAN_POINT('',(-5.E1,5.E1,0.E0));
#54=DIRECTION('',(0.E0,0.E0,-1.E0));
#55=DIRECTION('',(1.E0,0.E0,0.E0));
#56=AXIS2_PLACEMENT_3D('',#53,#54,#55);
#58=CARTESIAN_POINT('',(5.E1,5.E1,0.E0));
#59=DIRECTION('',(0.E0,0.E0,-1.E0));
#60=DIRECTION('',(-1.E0,0.E0,0.E0));
#61=AXIS2_PLACEMENT_3D('',#58,#59,#60);
#63=CARTESIAN_POINT('',(5.E1,5.E1,0.E0));
#64=DIRECTION('',(0.E0,0.E0,-1.E0));
#65=DIRECTION('',(1.E0,0.E0,0.E0));
#66=AXIS2_PLACEMENT_3D('',#63,#64,#65);
#68=CARTESIAN_POINT('',(-5.E1,-5.E1,0.E0));
#69=DIRECTION('',(0.E0,0.E0,-1.E0));
#70=DIRECTION('',(-1.E0,0.E0,0.E0));
#71=AXIS2_PLACEMENT_3D('',#68,#69,#70);
#73=CARTESIAN_POINT('',(-5.E1,-5.E1,0.E0));
#74=DIRECTION('',(0.E0,0.E0,-1.E0));
#75=DIRECTION('',(1.E0,0.E0,0.E0));
#76=AXIS2_PLACEMENT_3D('',#73,#74,#75);
#78=CARTESIAN_POINT('',(5.E1,-5.E1,0.E0));
#79=DIRECTION('',(0.E0,0.E0,-1.E0));
#80=DIRECTION('',(-1.E0,0.E0,0.E0));
#81=AXIS2_PLACEMENT_3D('',#78,#79,#80);
#83=CARTESIAN_POINT('',(5.E1,-5.E1,0.E0));
#84=DIRECTION('',(0.E0,0.E0,-1.E0));
#85=DIRECTION('',(1.E0,0.E0,0.E0));
#86=AXIS2_PLACEMENT_3D('',#83,#84,#85);
#88=DIRECTION('',(-1.E0,0.E0,0.E0));
#89=VECTOR('',#88,5.4E1);
#90=CARTESIAN_POINT('',(2.7E1,3.E1,0.E0));
#91=LINE('',#90,#89);
#92=DIRECTION('',(0.E0,1.E0,0.E0));
#93=VECTOR('',#92,5.4E1);
#94=CARTESIAN_POINT('',(3.E1,-2.7E1,0.E0));
#95=LINE('',#94,#93);
#96=DIRECTION('',(1.E0,0.E0,0.E0));
#97=VECTOR('',#96,5.4E1);
#98=CARTESIAN_POINT('',(-2.7E1,-3.E1,0.E0));
#99=LINE('',#98,#97);
#100=DIRECTION('',(0.E0,-1.E0,0.E0));
#101=VECTOR('',#100,5.4E1);
#102=CARTESIAN_POINT('',(-3.E1,2.7E1,0.E0));
#103=LINE('',#102,#101);
#104=DIRECTION('',(0.E0,0.E0,1.E0));
#105=VECTOR('',#104,3.E0);
#106=CARTESIAN_POINT('',(-5.35E1,5.65E1,0.E0));
#107=LINE('',#106,#105);
#108=DIRECTION('',(0.E0,0.E0,1.E0));
#109=VECTOR('',#108,3.E0);
#110=CARTESIAN_POINT('',(5.35E1,5.65E1,0.E0));
#111=LINE('',#110,#109);
#112=DIRECTION('',(0.E0,0.E0,1.E0));
#113=VECTOR('',#112,3.E0);
#114=CARTESIAN_POINT('',(5.65E1,5.35E1,0.E0));
#115=LINE('',#114,#113);
#116=DIRECTION('',(0.E0,0.E0,1.E0));
#117=VECTOR('',#116,3.E0);
#118=CARTESIAN_POINT('',(5.65E1,-5.35E1,0.E0));
#119=LINE('',#118,#117);
#120=DIRECTION('',(0.E0,0.E0,1.E0));
#121=VECTOR('',#120,3.E0);
#122=CARTESIAN_POINT('',(5.35E1,-5.65E1,0.E0));
#123=LINE('',#122,#121);
#124=DIRECTION('',(0.E0,0.E0,1.E0));
#125=VECTOR('',#124,3.E0);
#126=CARTESIAN_POINT('',(-5.35E1,-5.65E1,0.E0));
#127=LINE('',#126,#125);
#128=DIRECTION('',(0.E0,0.E0,1.E0));
#129=VECTOR('',#128,3.E0);
#130=CARTESIAN_POINT('',(-5.65E1,-5.35E1,0.E0));
#131=LINE('',#130,#129);
#132=DIRECTION('',(0.E0,0.E0,1.E0));
#133=VECTOR('',#132,3.E0);
#134=CARTESIAN_POINT('',(-5.65E1,5.35E1,0.E0));
#135=LINE('',#134,#133);
#136=CARTESIAN_POINT('',(-5.35E1,5.35E1,3.E0));
#137=DIRECTION('',(0.E0,0.E0,1.E0));
#138=DIRECTION('',(2.131628207280E-14,1.E0,0.E0));
#139=AXIS2_PLACEMENT_3D('',#136,#137,#138);
#141=DIRECTION('',(-1.E0,0.E0,0.E0));
#142=VECTOR('',#141,1.07E2);
#143=CARTESIAN_POINT('',(5.35E1,5.65E1,3.E0));
#144=LINE('',#143,#142);
#145=CARTESIAN_POINT('',(5.35E1,5.35E1,3.E0));
#146=DIRECTION('',(0.E0,0.E0,1.E0));
#147=DIRECTION('',(1.E0,-1.894780628694E-14,0.E0));
#148=AXIS2_PLACEMENT_3D('',#145,#146,#147);
#150=DIRECTION('',(0.E0,1.E0,0.E0));
#151=VECTOR('',#150,1.07E2);
#152=CARTESIAN_POINT('',(5.65E1,-5.35E1,3.E0));
#153=LINE('',#152,#151);
#154=CARTESIAN_POINT('',(5.35E1,-5.35E1,3.E0));
#155=DIRECTION('',(0.E0,0.E0,1.E0));
#156=DIRECTION('',(0.E0,-1.E0,0.E0));
#157=AXIS2_PLACEMENT_3D('',#154,#155,#156);
#159=DIRECTION('',(1.E0,0.E0,0.E0));
#160=VECTOR('',#159,1.07E2);
#161=CARTESIAN_POINT('',(-5.35E1,-5.65E1,3.E0));
#162=LINE('',#161,#160);
#163=CARTESIAN_POINT('',(-5.35E1,-5.35E1,3.E0));
#164=DIRECTION('',(0.E0,0.E0,1.E0));
#165=DIRECTION('',(-1.E0,0.E0,0.E0));
#166=AXIS2_PLACEMENT_3D('',#163,#164,#165);
#168=DIRECTION('',(0.E0,-1.E0,0.E0));
#169=VECTOR('',#168,1.07E2);
#170=CARTESIAN_POINT('',(-5.65E1,5.35E1,3.E0));
#171=LINE('',#170,#169);
#172=CARTESIAN_POINT('',(-5.E1,5.E1,3.000032579133E0));
#173=DIRECTION('',(0.E0,0.E0,-1.E0));
#174=DIRECTION('',(-1.E0,0.E0,0.E0));
#175=AXIS2_PLACEMENT_3D('',#172,#173,#174);
#177=CARTESIAN_POINT('',(-5.E1,5.E1,3.000032579133E0));
#178=DIRECTION('',(0.E0,0.E0,-1.E0));
#179=DIRECTION('',(1.E0,0.E0,0.E0));
#180=AXIS2_PLACEMENT_3D('',#177,#178,#179);
#182=CARTESIAN_POINT('',(5.E1,5.E1,3.000032579133E0));
#183=DIRECTION('',(0.E0,0.E0,-1.E0));
#184=DIRECTION('',(-1.E0,0.E0,0.E0));
#185=AXIS2_PLACEMENT_3D('',#182,#183,#184);
#187=CARTESIAN_POINT('',(5.E1,5.E1,3.000032579133E0));
#188=DIRECTION('',(0.E0,0.E0,-1.E0));
#189=DIRECTION('',(1.E0,0.E0,0.E0));
#190=AXIS2_PLACEMENT_3D('',#187,#188,#189);
#192=CARTESIAN_POINT('',(-5.E1,-5.E1,3.000032579133E0));
#193=DIRECTION('',(0.E0,0.E0,-1.E0));
#194=DIRECTION('',(-1.E0,0.E0,0.E0));
#195=AXIS2_PLACEMENT_3D('',#192,#193,#194);
#197=CARTESIAN_POINT('',(-5.E1,-5.E1,3.000032579133E0));
#198=DIRECTION('',(0.E0,0.E0,-1.E0));
#199=DIRECTION('',(1.E0,0.E0,0.E0));
#200=AXIS2_PLACEMENT_3D('',#197,#198,#199);
#202=CARTESIAN_POINT('',(5.E1,-5.E1,3.000032579133E0));
#203=DIRECTION('',(0.E0,0.E0,-1.E0));
#204=DIRECTION('',(-1.E0,0.E0,0.E0));
#205=AXIS2_PLACEMENT_3D('',#202,#203,#204);
#207=CARTESIAN_POINT('',(5.E1,-5.E1,3.000032579133E0));
#208=DIRECTION('',(0.E0,0.E0,-1.E0));
#209=DIRECTION('',(1.E0,0.E0,0.E0));
#210=AXIS2_PLACEMENT_3D('',#207,#208,#209);
#212=CARTESIAN_POINT('',(-3.75E1,3.75E1,3.E0));
#213=DIRECTION('',(0.E0,0.E0,1.E0));
#214=DIRECTION('',(1.E0,0.E0,0.E0));
#215=AXIS2_PLACEMENT_3D('',#212,#213,#214);
#217=CARTESIAN_POINT('',(-3.75E1,3.75E1,3.E0));
#218=DIRECTION('',(0.E0,0.E0,1.E0));
#219=DIRECTION('',(-1.E0,0.E0,0.E0));
#220=AXIS2_PLACEMENT_3D('',#217,#218,#219);
#222=CARTESIAN_POINT('',(3.75E1,3.75E1,3.E0));
#223=DIRECTION('',(0.E0,0.E0,1.E0));
#224=DIRECTION('',(1.E0,0.E0,0.E0));
#225=AXIS2_PLACEMENT_3D('',#222,#223,#224);
#227=CARTESIAN_POINT('',(3.75E1,3.75E1,3.E0));
#228=DIRECTION('',(0.E0,0.E0,1.E0));
#229=DIRECTION('',(-1.E0,0.E0,0.E0));
#230=AXIS2_PLACEMENT_3D('',#227,#228,#229);
#232=CARTESIAN_POINT('',(3.75E1,-3.75E1,3.E0));
#233=DIRECTION('',(0.E0,0.E0,1.E0));
#234=DIRECTION('',(1.E0,0.E0,0.E0));
#235=AXIS2_PLACEMENT_3D('',#232,#233,#234);
#237=CARTESIAN_POINT('',(3.75E1,-3.75E1,3.E0));
#238=DIRECTION('',(0.E0,0.E0,1.E0));
#239=DIRECTION('',(-1.E0,0.E0,0.E0));
#240=AXIS2_PLACEMENT_3D('',#237,#238,#239);
#242=CARTESIAN_POINT('',(-3.75E1,-3.75E1,3.E0));
#243=DIRECTION('',(0.E0,0.E0,1.E0));
#244=DIRECTION('',(1.E0,0.E0,0.E0));
#245=AXIS2_PLACEMENT_3D('',#242,#243,#244);
#247=CARTESIAN_POINT('',(-3.75E1,-3.75E1,3.E0));
#248=DIRECTION('',(0.E0,0.E0,1.E0));
#249=DIRECTION('',(-1.E0,0.E0,0.E0));
#250=AXIS2_PLACEMENT_3D('',#247,#248,#249);
#252=DIRECTION('',(0.E0,1.E0,0.E0));
#253=VECTOR('',#252,5.4E1);
#254=CARTESIAN_POINT('',(3.E1,-2.7E1,3.E0));
#255=LINE('',#254,#253);
#256=DIRECTION('',(-1.E0,0.E0,0.E0));
#257=VECTOR('',#256,5.4E1);
#258=CARTESIAN_POINT('',(2.7E1,3.E1,3.E0));
#259=LINE('',#258,#257);
#260=DIRECTION('',(0.E0,-1.E0,0.E0));
#261=VECTOR('',#260,5.4E1);
#262=CARTESIAN_POINT('',(-3.E1,2.7E1,3.E0));
#263=LINE('',#262,#261);
#264=DIRECTION('',(1.E0,0.E0,0.E0));
#265=VECTOR('',#264,5.4E1);
#266=CARTESIAN_POINT('',(-2.7E1,-3.E1,3.E0));
#267=LINE('',#266,#265);
#268=DIRECTION('',(7.071023985535E-1,1.484518252231E-8,-7.071111637924E-1));
#269=VECTOR('',#268,3.535533899476E0);
#270=CARTESIAN_POINT('',(-5.464997627235E1,4.999999991965E1,3.000023713524E0));
#271=LINE('',#270,#269);
#272=DIRECTION('',(-7.071023985536E-1,-1.484518453203E-8,-7.071111637924E-1));
#273=VECTOR('',#272,3.535533899476E0);
#274=CARTESIAN_POINT('',(-4.535002372765E1,5.000000008035E1,3.000023713524E0));
#275=LINE('',#274,#273);
#276=CARTESIAN_POINT('',(-5.E1,5.E1,5.000027886042E-1));
#277=DIRECTION('',(0.E0,0.E0,-1.E0));
#278=DIRECTION('',(1.E0,0.E0,0.E0));
#279=AXIS2_PLACEMENT_3D('',#276,#277,#278);
#281=DIRECTION('',(1.645600262658E-5,-5.572459128307E-8,-9.999999998646E-1));
#282=VECTOR('',#281,5.000082233059E-1);
#283=CARTESIAN_POINT('',(-4.785000822814E1,5.000000002786E1,5.000082232382E-1));
#284=LINE('',#283,#282);
#285=CARTESIAN_POINT('',(-5.E1,5.E1,5.000027886042E-1));
#286=DIRECTION('',(0.E0,0.E0,-1.E0));
#287=DIRECTION('',(-1.E0,0.E0,0.E0));
#288=AXIS2_PLACEMENT_3D('',#285,#286,#287);
#290=DIRECTION('',(-1.645600262658E-5,5.572459128307E-8,-9.999999998646E-1));
#291=VECTOR('',#290,5.000082233059E-1);
#292=CARTESIAN_POINT('',(-5.214999177186E1,4.999999997214E1,5.000082232381E-1));
#293=LINE('',#292,#291);
#294=DIRECTION('',(7.071023985536E-1,1.484518252231E-8,-7.071111637924E-1));
#295=VECTOR('',#294,3.535533899476E0);
#296=CARTESIAN_POINT('',(4.535002372765E1,4.999999991965E1,3.000023713524E0));
#297=LINE('',#296,#295);
#298=DIRECTION('',(-7.071023985536E-1,-1.484518453203E-8,-7.071111637924E-1));
#299=VECTOR('',#298,3.535533899476E0);
#300=CARTESIAN_POINT('',(5.464997627235E1,5.000000008035E1,3.000023713524E0));
#301=LINE('',#300,#299);
#302=CARTESIAN_POINT('',(5.E1,5.E1,5.000027886042E-1));
#303=DIRECTION('',(0.E0,0.E0,-1.E0));
#304=DIRECTION('',(1.E0,0.E0,0.E0));
#305=AXIS2_PLACEMENT_3D('',#302,#303,#304);
#307=DIRECTION('',(1.645600262658E-5,-5.572459128307E-8,-9.999999998646E-1));
#308=VECTOR('',#307,5.000082233059E-1);
#309=CARTESIAN_POINT('',(5.214999177186E1,5.000000002786E1,5.000082232382E-1));
#310=LINE('',#309,#308);
#311=CARTESIAN_POINT('',(5.E1,5.E1,5.000027886042E-1));
#312=DIRECTION('',(0.E0,0.E0,-1.E0));
#313=DIRECTION('',(-1.E0,0.E0,0.E0));
#314=AXIS2_PLACEMENT_3D('',#311,#312,#313);
#316=DIRECTION('',(-1.645600262658E-5,5.572459128307E-8,-9.999999998646E-1));
#317=VECTOR('',#316,5.000082233059E-1);
#318=CARTESIAN_POINT('',(4.785000822814E1,4.999999997214E1,5.000082232381E-1));
#319=LINE('',#318,#317);
#320=DIRECTION('',(7.071023985536E-1,1.484518252231E-8,-7.071111637924E-1));
#321=VECTOR('',#320,3.535533899476E0);
#322=CARTESIAN_POINT('',(-5.464997627235E1,-5.000000008035E1,3.000023713524E0));
#323=LINE('',#322,#321);
#324=DIRECTION('',(-7.071023985536E-1,-1.484518453203E-8,-7.071111637924E-1));
#325=VECTOR('',#324,3.535533899476E0);
#326=CARTESIAN_POINT('',(-4.535002372765E1,-4.999999991965E1,3.000023713524E0));
#327=LINE('',#326,#325);
#328=CARTESIAN_POINT('',(-5.E1,-5.E1,5.000027886042E-1));
#329=DIRECTION('',(0.E0,0.E0,-1.E0));
#330=DIRECTION('',(1.E0,0.E0,0.E0));
#331=AXIS2_PLACEMENT_3D('',#328,#329,#330);
#333=DIRECTION('',(1.645600264079E-5,-5.572459128307E-8,-9.999999998646E-1));
#334=VECTOR('',#333,5.000082233059E-1);
#335=CARTESIAN_POINT('',(-4.785000822814E1,-4.999999997214E1,
5.000082232382E-1));
#336=LINE('',#335,#334);
#337=CARTESIAN_POINT('',(-5.E1,-5.E1,5.000027886042E-1));
#338=DIRECTION('',(0.E0,0.E0,-1.E0));
#339=DIRECTION('',(-1.E0,0.E0,0.E0));
#340=AXIS2_PLACEMENT_3D('',#337,#338,#339);
#342=DIRECTION('',(-1.645600262658E-5,5.572459128307E-8,-9.999999998646E-1));
#343=VECTOR('',#342,5.000082233059E-1);
#344=CARTESIAN_POINT('',(-5.214999177186E1,-5.000000002786E1,
5.000082232381E-1));
#345=LINE('',#344,#343);
#346=DIRECTION('',(7.071023985536E-1,1.484518252231E-8,-7.071111637924E-1));
#347=VECTOR('',#346,3.535533899476E0);
#348=CARTESIAN_POINT('',(4.535002372765E1,-5.000000008035E1,3.000023713524E0));
#349=LINE('',#348,#347);
#350=DIRECTION('',(-7.071023985536E-1,-1.484518453203E-8,-7.071111637924E-1));
#351=VECTOR('',#350,3.535533899476E0);
#352=CARTESIAN_POINT('',(5.464997627235E1,-4.999999991965E1,3.000023713524E0));
#353=LINE('',#352,#351);
#354=CARTESIAN_POINT('',(5.E1,-5.E1,5.000027886042E-1));
#355=DIRECTION('',(0.E0,0.E0,-1.E0));
#356=DIRECTION('',(1.E0,0.E0,0.E0));
#357=AXIS2_PLACEMENT_3D('',#354,#355,#356);
#359=DIRECTION('',(1.645600262658E-5,-5.572459128307E-8,-9.999999998646E-1));
#360=VECTOR('',#359,5.000082233059E-1);
#361=CARTESIAN_POINT('',(5.214999177186E1,-4.999999997214E1,5.000082232382E-1));
#362=LINE('',#361,#360);
#363=CARTESIAN_POINT('',(5.E1,-5.E1,5.000027886042E-1));
#364=DIRECTION('',(0.E0,0.E0,-1.E0));
#365=DIRECTION('',(-1.E0,0.E0,0.E0));
#366=AXIS2_PLACEMENT_3D('',#363,#364,#365);
#368=DIRECTION('',(-1.645600264079E-5,5.572459128307E-8,-9.999999998646E-1));
#369=VECTOR('',#368,5.000082233059E-1);
#370=CARTESIAN_POINT('',(4.785000822814E1,-5.000000002786E1,5.000082232382E-1));
#371=LINE('',#370,#369);
#372=DIRECTION('',(0.E0,0.E0,1.E0));
#373=VECTOR('',#372,1.5E1);
#374=CARTESIAN_POINT('',(-3.5E1,3.75E1,3.E0));
#375=LINE('',#374,#373);
#376=DIRECTION('',(0.E0,0.E0,1.E0));
#377=VECTOR('',#376,1.5E1);
#378=CARTESIAN_POINT('',(-4.E1,3.75E1,3.E0));
#379=LINE('',#378,#377);
#380=CARTESIAN_POINT('',(-3.75E1,3.75E1,1.8E1));
#381=DIRECTION('',(0.E0,0.E0,1.E0));
#382=DIRECTION('',(1.E0,0.E0,0.E0));
#383=AXIS2_PLACEMENT_3D('',#380,#381,#382);
#385=CARTESIAN_POINT('',(-3.75E1,3.75E1,1.8E1));
#386=DIRECTION('',(0.E0,0.E0,1.E0));
#387=DIRECTION('',(-1.E0,0.E0,0.E0));
#388=AXIS2_PLACEMENT_3D('',#385,#386,#387);
#390=CARTESIAN_POINT('',(3.75E1,3.75E1,1.8E1));
#391=DIRECTION('',(0.E0,0.E0,1.E0));
#392=DIRECTION('',(1.E0,0.E0,0.E0));
#393=AXIS2_PLACEMENT_3D('',#390,#391,#392);
#395=CARTESIAN_POINT('',(3.75E1,3.75E1,1.8E1));
#396=DIRECTION('',(0.E0,0.E0,1.E0));
#397=DIRECTION('',(-1.E0,0.E0,0.E0));
#398=AXIS2_PLACEMENT_3D('',#395,#396,#397);
#400=CARTESIAN_POINT('',(3.75E1,-3.75E1,1.8E1));
#401=DIRECTION('',(0.E0,0.E0,1.E0));
#402=DIRECTION('',(1.E0,0.E0,0.E0));
#403=AXIS2_PLACEMENT_3D('',#400,#401,#402);
#405=CARTESIAN_POINT('',(3.75E1,-3.75E1,1.8E1));
#406=DIRECTION('',(0.E0,0.E0,1.E0));
#407=DIRECTION('',(-1.E0,0.E0,0.E0));
#408=AXIS2_PLACEMENT_3D('',#405,#406,#407);
#410=CARTESIAN_POINT('',(-3.75E1,-3.75E1,1.8E1));
#411=DIRECTION('',(0.E0,0.E0,1.E0));
#412=DIRECTION('',(1.E0,0.E0,0.E0));
#413=AXIS2_PLACEMENT_3D('',#410,#411,#412);
#415=CARTESIAN_POINT('',(-3.75E1,-3.75E1,1.8E1));
#416=DIRECTION('',(0.E0,0.E0,1.E0));
#417=DIRECTION('',(-1.E0,0.E0,0.E0));
#418=AXIS2_PLACEMENT_3D('',#415,#416,#417);
#420=DIRECTION('',(0.E0,0.E0,1.E0));
#421=VECTOR('',#420,1.5E1);
#422=CARTESIAN_POINT('',(4.E1,3.75E1,3.E0));
#423=LINE('',#422,#421);
#424=DIRECTION('',(0.E0,0.E0,1.E0));
#425=VECTOR('',#424,1.5E1);
#426=CARTESIAN_POINT('',(3.5E1,3.75E1,3.E0));
#427=LINE('',#426,#425);
#428=DIRECTION('',(0.E0,0.E0,1.E0));
#429=VECTOR('',#428,1.5E1);
#430=CARTESIAN_POINT('',(4.E1,-3.75E1,3.E0));
#431=LINE('',#430,#429);
#432=DIRECTION('',(0.E0,0.E0,1.E0));
#433=VECTOR('',#432,1.5E1);
#434=CARTESIAN_POINT('',(3.5E1,-3.75E1,3.E0));
#435=LINE('',#434,#433);
#436=DIRECTION('',(0.E0,0.E0,1.E0));
#437=VECTOR('',#436,1.5E1);
#438=CARTESIAN_POINT('',(-3.5E1,-3.75E1,3.E0));
#439=LINE('',#438,#437);
#440=DIRECTION('',(0.E0,0.E0,1.E0));
#441=VECTOR('',#440,1.5E1);
#442=CARTESIAN_POINT('',(-4.E1,-3.75E1,3.E0));
#443=LINE('',#442,#441);
#444=DIRECTION('',(0.E0,0.E0,-1.E0));
#445=VECTOR('',#444,3.E0);
#446=CARTESIAN_POINT('',(3.E1,2.7E1,3.E0));
#447=LINE('',#446,#445);
#448=DIRECTION('',(0.E0,0.E0,-1.E0));
#449=VECTOR('',#448,3.E0);
#450=CARTESIAN_POINT('',(3.E1,-2.7E1,3.E0));
#451=LINE('',#450,#449);
#452=CARTESIAN_POINT('',(2.7E1,2.7E1,3.E0));
#453=DIRECTION('',(0.E0,0.E0,-1.E0));
#454=DIRECTION('',(0.E0,1.E0,0.E0));
#455=AXIS2_PLACEMENT_3D('',#452,#453,#454);
#457=CARTESIAN_POINT('',(2.7E1,2.7E1,0.E0));
#458=DIRECTION('',(0.E0,0.E0,1.E0));
#459=DIRECTION('',(1.E0,0.E0,0.E0));
#460=AXIS2_PLACEMENT_3D('',#457,#458,#459);
#462=DIRECTION('',(0.E0,0.E0,-1.E0));
#463=VECTOR('',#462,3.E0);
#464=CARTESIAN_POINT('',(-2.7E1,3.E1,3.E0));
#465=LINE('',#464,#463);
#466=DIRECTION('',(0.E0,0.E0,-1.E0));
#467=VECTOR('',#466,3.E0);
#468=CARTESIAN_POINT('',(2.7E1,3.E1,3.E0));
#469=LINE('',#468,#467);
#470=CARTESIAN_POINT('',(-2.7E1,2.7E1,3.E0));
#471=DIRECTION('',(0.E0,0.E0,-1.E0));
#472=DIRECTION('',(-1.E0,0.E0,0.E0));
#473=AXIS2_PLACEMENT_3D('',#470,#471,#472);
#475=CARTESIAN_POINT('',(-2.7E1,2.7E1,0.E0));
#476=DIRECTION('',(0.E0,0.E0,1.E0));
#477=DIRECTION('',(0.E0,1.E0,0.E0));
#478=AXIS2_PLACEMENT_3D('',#475,#476,#477);
#480=DIRECTION('',(0.E0,0.E0,-1.E0));
#481=VECTOR('',#480,3.E0);
#482=CARTESIAN_POINT('',(-3.E1,2.7E1,3.E0));
#483=LINE('',#482,#481);
#484=DIRECTION('',(0.E0,0.E0,-1.E0));
#485=VECTOR('',#484,3.E0);
#486=CARTESIAN_POINT('',(-3.E1,-2.7E1,3.E0));
#487=LINE('',#486,#485);
#488=CARTESIAN_POINT('',(-2.7E1,-2.7E1,3.E0));
#489=DIRECTION('',(0.E0,0.E0,-1.E0));
#490=DIRECTION('',(0.E0,-1.E0,0.E0));
#491=AXIS2_PLACEMENT_3D('',#488,#489,#490);
#493=CARTESIAN_POINT('',(-2.7E1,-2.7E1,0.E0));
#494=DIRECTION('',(0.E0,0.E0,1.E0));
#495=DIRECTION('',(-1.E0,0.E0,0.E0));
#496=AXIS2_PLACEMENT_3D('',#493,#494,#495);
#498=DIRECTION('',(0.E0,0.E0,-1.E0));
#499=VECTOR('',#498,3.E0);
#500=CARTESIAN_POINT('',(2.7E1,-3.E1,3.E0));
#501=LINE('',#500,#499);
#502=DIRECTION('',(0.E0,0.E0,-1.E0));
#503=VECTOR('',#502,3.E0);
#504=CARTESIAN_POINT('',(-2.7E1,-3.E1,3.E0));
#505=LINE('',#504,#503);
#506=CARTESIAN_POINT('',(2.7E1,-2.7E1,3.E0));
#507=DIRECTION('',(0.E0,0.E0,-1.E0));
#508=DIRECTION('',(1.E0,0.E0,0.E0));
#509=AXIS2_PLACEMENT_3D('',#506,#507,#508);
#511=CARTESIAN_POINT('',(2.7E1,-2.7E1,0.E0));
#512=DIRECTION('',(0.E0,0.E0,1.E0));
#513=DIRECTION('',(0.E0,-1.E0,0.E0));
#514=AXIS2_PLACEMENT_3D('',#511,#512,#513);
#516=CARTESIAN_POINT('',(-5.35E1,5.65E1,0.E0));
#517=CARTESIAN_POINT('',(-5.65E1,5.35E1,0.E0));
#518=VERTEX_POINT('',#516);
#519=VERTEX_POINT('',#517);
#520=CARTESIAN_POINT('',(-5.65E1,-5.35E1,0.E0));
#521=VERTEX_POINT('',#520);
#522=CARTESIAN_POINT('',(-5.35E1,-5.65E1,0.E0));
#523=VERTEX_POINT('',#522);
#524=CARTESIAN_POINT('',(5.35E1,-5.65E1,0.E0));
#525=VERTEX_POINT('',#524);
#526=CARTESIAN_POINT('',(5.65E1,-5.35E1,0.E0));
#527=VERTEX_POINT('',#526);
#528=CARTESIAN_POINT('',(5.65E1,5.35E1,0.E0));
#529=VERTEX_POINT('',#528);
#530=CARTESIAN_POINT('',(5.35E1,5.65E1,0.E0));
#531=VERTEX_POINT('',#530);
#532=CARTESIAN_POINT('',(-5.35E1,5.65E1,3.E0));
#533=CARTESIAN_POINT('',(-5.65E1,5.35E1,3.E0));
#534=VERTEX_POINT('',#532);
#535=VERTEX_POINT('',#533);
#536=CARTESIAN_POINT('',(-5.65E1,-5.35E1,3.E0));
#537=VERTEX_POINT('',#536);
#538=CARTESIAN_POINT('',(-5.35E1,-5.65E1,3.E0));
#539=VERTEX_POINT('',#538);
#540=CARTESIAN_POINT('',(5.35E1,-5.65E1,3.E0));
#541=VERTEX_POINT('',#540);
#542=CARTESIAN_POINT('',(5.65E1,-5.35E1,3.E0));
#543=VERTEX_POINT('',#542);
#544=CARTESIAN_POINT('',(5.65E1,5.35E1,3.E0));
#545=VERTEX_POINT('',#544);
#546=CARTESIAN_POINT('',(5.35E1,5.65E1,3.E0));
#547=VERTEX_POINT('',#546);
#548=CARTESIAN_POINT('',(-5.215E1,5.E1,0.E0));
#549=CARTESIAN_POINT('',(-4.785E1,5.E1,0.E0));
#550=VERTEX_POINT('',#548);
#551=VERTEX_POINT('',#549);
#552=CARTESIAN_POINT('',(-5.464996141742E1,5.E1,3.000032579133E0));
#553=CARTESIAN_POINT('',(-4.535003858258E1,5.E1,3.000032579133E0));
#554=VERTEX_POINT('',#552);
#555=VERTEX_POINT('',#553);
#556=CARTESIAN_POINT('',(-4.785000822814E1,5.000000002786E1,5.000082232382E-1));
#557=VERTEX_POINT('',#556);
#558=CARTESIAN_POINT('',(-5.214999177186E1,4.999999997214E1,5.000082232381E-1));
#559=VERTEX_POINT('',#558);
#560=CARTESIAN_POINT('',(4.785E1,5.E1,0.E0));
#561=CARTESIAN_POINT('',(5.215E1,5.E1,0.E0));
#562=VERTEX_POINT('',#560);
#563=VERTEX_POINT('',#561);
#564=CARTESIAN_POINT('',(-5.215E1,-5.E1,0.E0));
#565=CARTESIAN_POINT('',(-4.785E1,-5.E1,0.E0));
#566=VERTEX_POINT('',#564);
#567=VERTEX_POINT('',#565);
#568=CARTESIAN_POINT('',(4.785E1,-5.E1,0.E0));
#569=CARTESIAN_POINT('',(5.215E1,-5.E1,0.E0));
#570=VERTEX_POINT('',#568);
#571=VERTEX_POINT('',#569);
#572=CARTESIAN_POINT('',(4.535003858258E1,5.E1,3.000032579133E0));
#573=CARTESIAN_POINT('',(5.464996141742E1,5.E1,3.000032579133E0));
#574=VERTEX_POINT('',#572);
#575=VERTEX_POINT('',#573);
#576=CARTESIAN_POINT('',(4.785E1,5.E1,5.000027886042E-1));
#577=CARTESIAN_POINT('',(5.215E1,5.E1,5.000027886042E-1));
#578=VERTEX_POINT('',#576);
#579=VERTEX_POINT('',#577);
#580=CARTESIAN_POINT('',(-5.464996141742E1,-5.E1,3.000032579133E0));
#581=CARTESIAN_POINT('',(-4.535003858258E1,-5.E1,3.000032579133E0));
#582=VERTEX_POINT('',#580);
#583=VERTEX_POINT('',#581);
#584=CARTESIAN_POINT('',(-5.215E1,-5.E1,5.000027886042E-1));
#585=CARTESIAN_POINT('',(-4.785E1,-5.E1,5.000027886042E-1));
#586=VERTEX_POINT('',#584);
#587=VERTEX_POINT('',#585);
#588=CARTESIAN_POINT('',(4.535003858258E1,-5.E1,3.000032579133E0));
#589=CARTESIAN_POINT('',(5.464996141742E1,-5.E1,3.000032579133E0));
#590=VERTEX_POINT('',#588);
#591=VERTEX_POINT('',#589);
#592=CARTESIAN_POINT('',(4.785E1,-5.E1,5.000027886042E-1));
#593=CARTESIAN_POINT('',(5.215E1,-5.E1,5.000027886042E-1));
#594=VERTEX_POINT('',#592);
#595=VERTEX_POINT('',#593);
#596=CARTESIAN_POINT('',(-3.5E1,3.75E1,1.8E1));
#597=CARTESIAN_POINT('',(-4.E1,3.75E1,1.8E1));
#598=VERTEX_POINT('',#596);
#599=VERTEX_POINT('',#597);
#600=CARTESIAN_POINT('',(4.E1,3.75E1,1.8E1));
#601=CARTESIAN_POINT('',(3.5E1,3.75E1,1.8E1));
#602=VERTEX_POINT('',#600);
#603=VERTEX_POINT('',#601);
#604=CARTESIAN_POINT('',(4.E1,-3.75E1,1.8E1));
#605=CARTESIAN_POINT('',(3.5E1,-3.75E1,1.8E1));
#606=VERTEX_POINT('',#604);
#607=VERTEX_POINT('',#605);
#608=CARTESIAN_POINT('',(-3.5E1,-3.75E1,1.8E1));
#609=CARTESIAN_POINT('',(-4.E1,-3.75E1,1.8E1));
#610=VERTEX_POINT('',#608);
#611=VERTEX_POINT('',#609);
#612=CARTESIAN_POINT('',(-3.5E1,3.75E1,3.E0));
#613=CARTESIAN_POINT('',(-4.E1,3.75E1,3.E0));
#614=VERTEX_POINT('',#612);
#615=VERTEX_POINT('',#613);
#616=CARTESIAN_POINT('',(4.E1,3.75E1,3.E0));
#617=CARTESIAN_POINT('',(3.5E1,3.75E1,3.E0));
#618=VERTEX_POINT('',#616);
#619=VERTEX_POINT('',#617);
#620=CARTESIAN_POINT('',(4.E1,-3.75E1,3.E0));
#621=CARTESIAN_POINT('',(3.5E1,-3.75E1,3.E0));
#622=VERTEX_POINT('',#620);
#623=VERTEX_POINT('',#621);
#624=CARTESIAN_POINT('',(-3.5E1,-3.75E1,3.E0));
#625=CARTESIAN_POINT('',(-4.E1,-3.75E1,3.E0));
#626=VERTEX_POINT('',#624);
#627=VERTEX_POINT('',#625);
#628=CARTESIAN_POINT('',(-3.E1,2.7E1,3.E0));
#629=CARTESIAN_POINT('',(-3.E1,2.7E1,0.E0));
#630=VERTEX_POINT('',#628);
#631=VERTEX_POINT('',#629);
#632=CARTESIAN_POINT('',(-2.7E1,3.E1,3.E0));
#633=CARTESIAN_POINT('',(-2.7E1,3.E1,0.E0));
#634=VERTEX_POINT('',#632);
#635=VERTEX_POINT('',#633);
#636=CARTESIAN_POINT('',(2.7E1,3.E1,3.E0));
#637=CARTESIAN_POINT('',(2.7E1,3.E1,0.E0));
#638=VERTEX_POINT('',#636);
#639=VERTEX_POINT('',#637);
#640=CARTESIAN_POINT('',(3.E1,2.7E1,3.E0));
#641=CARTESIAN_POINT('',(3.E1,2.7E1,0.E0));
#642=VERTEX_POINT('',#640);
#643=VERTEX_POINT('',#641);
#644=CARTESIAN_POINT('',(3.E1,-2.7E1,3.E0));
#645=CARTESIAN_POINT('',(3.E1,-2.7E1,0.E0));
#646=VERTEX_POINT('',#644);
#647=VERTEX_POINT('',#645);
#648=CARTESIAN_POINT('',(2.7E1,-3.E1,3.E0));
#649=CARTESIAN_POINT('',(2.7E1,-3.E1,0.E0));
#650=VERTEX_POINT('',#648);
#651=VERTEX_POINT('',#649);
#652=CARTESIAN_POINT('',(-2.7E1,-3.E1,3.E0));
#653=CARTESIAN_POINT('',(-2.7E1,-3.E1,0.E0));
#654=VERTEX_POINT('',#652);
#655=VERTEX_POINT('',#653);
#656=CARTESIAN_POINT('',(-3.E1,-2.7E1,3.E0));
#657=CARTESIAN_POINT('',(-3.E1,-2.7E1,0.E0));
#658=VERTEX_POINT('',#656);
#659=VERTEX_POINT('',#657);
#660=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#661=DIRECTION('',(0.E0,0.E0,1.E0));
#662=DIRECTION('',(1.E0,0.E0,0.E0));
#663=AXIS2_PLACEMENT_3D('',#660,#661,#662);
#664=PLANE('',#663);
#666=ORIENTED_EDGE('',*,*,#665,.T.);
#668=ORIENTED_EDGE('',*,*,#667,.T.);
#670=ORIENTED_EDGE('',*,*,#669,.T.);
#672=ORIENTED_EDGE('',*,*,#671,.T.);
#674=ORIENTED_EDGE('',*,*,#673,.T.);
#676=ORIENTED_EDGE('',*,*,#675,.T.);
#678=ORIENTED_EDGE('',*,*,#677,.T.);
#680=ORIENTED_EDGE('',*,*,#679,.T.);
#681=EDGE_LOOP('',(#666,#668,#670,#672,#674,#676,#678,#680));
#682=FACE_OUTER_BOUND('',#681,.F.);
#684=ORIENTED_EDGE('',*,*,#683,.T.);
#686=ORIENTED_EDGE('',*,*,#685,.T.);
#687=EDGE_LOOP('',(#684,#686));
#688=FACE_BOUND('',#687,.F.);
#690=ORIENTED_EDGE('',*,*,#689,.T.);
#692=ORIENTED_EDGE('',*,*,#691,.T.);
#693=EDGE_LOOP('',(#690,#692));
#694=FACE_BOUND('',#693,.F.);
#696=ORIENTED_EDGE('',*,*,#695,.T.);
#698=ORIENTED_EDGE('',*,*,#697,.T.);
#699=EDGE_LOOP('',(#696,#698));
#700=FACE_BOUND('',#699,.F.);
#702=ORIENTED_EDGE('',*,*,#701,.T.);
#704=ORIENTED_EDGE('',*,*,#703,.T.);
#705=EDGE_LOOP('',(#702,#704));
#706=FACE_BOUND('',#705,.F.);
#708=ORIENTED_EDGE('',*,*,#707,.F.);
#710=ORIENTED_EDGE('',*,*,#709,.F.);
#712=ORIENTED_EDGE('',*,*,#711,.F.);
#714=ORIENTED_EDGE('',*,*,#713,.F.);
#716=ORIENTED_EDGE('',*,*,#715,.F.);
#718=ORIENTED_EDGE('',*,*,#717,.F.);
#720=ORIENTED_EDGE('',*,*,#719,.F.);
#722=ORIENTED_EDGE('',*,*,#721,.F.);
#723=EDGE_LOOP('',(#708,#710,#712,#714,#716,#718,#720,#722));
#724=FACE_BOUND('',#723,.F.);
#725=ADVANCED_FACE('',(#682,#688,#694,#700,#706,#724),#664,.F.);
#726=CARTESIAN_POINT('',(-5.35E1,5.35E1,0.E0));
#727=DIRECTION('',(0.E0,0.E0,1.E0));
#728=DIRECTION('',(1.E0,0.E0,0.E0));
#729=AXIS2_PLACEMENT_3D('',#726,#727,#728);
#730=CYLINDRICAL_SURFACE('',#729,3.E0);
#731=ORIENTED_EDGE('',*,*,#665,.F.);
#733=ORIENTED_EDGE('',*,*,#732,.T.);
#735=ORIENTED_EDGE('',*,*,#734,.T.);
#737=ORIENTED_EDGE('',*,*,#736,.F.);
#738=EDGE_LOOP('',(#731,#733,#735,#737));
#739=FACE_OUTER_BOUND('',#738,.F.);
#740=ADVANCED_FACE('',(#739),#730,.T.);
#741=CARTESIAN_POINT('',(5.35E1,5.65E1,0.E0));
#742=DIRECTION('',(0.E0,1.E0,0.E0));
#743=DIRECTION('',(-1.E0,0.E0,0.E0));
#744=AXIS2_PLACEMENT_3D('',#741,#742,#743);
#745=PLANE('',#744);
#746=ORIENTED_EDGE('',*,*,#679,.F.);
#748=ORIENTED_EDGE('',*,*,#747,.T.);
#750=ORIENTED_EDGE('',*,*,#749,.T.);
#751=ORIENTED_EDGE('',*,*,#732,.F.);
#752=EDGE_LOOP('',(#746,#748,#750,#751));
#753=FACE_OUTER_BOUND('',#752,.F.);
#754=ADVANCED_FACE('',(#753),#745,.T.);
#755=CARTESIAN_POINT('',(5.35E1,5.35E1,0.E0));
#756=DIRECTION('',(0.E0,0.E0,1.E0));
#757=DIRECTION('',(1.E0,0.E0,0.E0));
#758=AXIS2_PLACEMENT_3D('',#755,#756,#757);
#759=CYLINDRICAL_SURFACE('',#758,3.E0);
#760=ORIENTED_EDGE('',*,*,#677,.F.);
#762=ORIENTED_EDGE('',*,*,#761,.T.);
#764=ORIENTED_EDGE('',*,*,#763,.T.);
#765=ORIENTED_EDGE('',*,*,#747,.F.);
#766=EDGE_LOOP('',(#760,#762,#764,#765));
#767=FACE_OUTER_BOUND('',#766,.F.);
#768=ADVANCED_FACE('',(#767),#759,.T.);
#769=CARTESIAN_POINT('',(5.65E1,-5.35E1,0.E0));
#770=DIRECTION('',(1.E0,0.E0,0.E0));
#771=DIRECTION('',(0.E0,1.E0,0.E0));
#772=AXIS2_PLACEMENT_3D('',#769,#770,#771);
#773=PLANE('',#772);
#774=ORIENTED_EDGE('',*,*,#675,.F.);
#776=ORIENTED_EDGE('',*,*,#775,.T.);
#778=ORIENTED_EDGE('',*,*,#777,.T.);
#779=ORIENTED_EDGE('',*,*,#761,.F.);
#780=EDGE_LOOP('',(#774,#776,#778,#779));
#781=FACE_OUTER_BOUND('',#780,.F.);
#782=ADVANCED_FACE('',(#781),#773,.T.);
#783=CARTESIAN_POINT('',(5.35E1,-5.35E1,0.E0));
#784=DIRECTION('',(0.E0,0.E0,1.E0));
#785=DIRECTION('',(1.E0,0.E0,0.E0));
#786=AXIS2_PLACEMENT_3D('',#783,#784,#785);
#787=CYLINDRICAL_SURFACE('',#786,3.E0);
#788=ORIENTED_EDGE('',*,*,#673,.F.);
#790=ORIENTED_EDGE('',*,*,#789,.T.);
#792=ORIENTED_EDGE('',*,*,#791,.T.);
#793=ORIENTED_EDGE('',*,*,#775,.F.);
#794=EDGE_LOOP('',(#788,#790,#792,#793));
#795=FACE_OUTER_BOUND('',#794,.F.);
#796=ADVANCED_FACE('',(#795),#787,.T.);
#797=CARTESIAN_POINT('',(-5.35E1,-5.65E1,0.E0));
#798=DIRECTION('',(0.E0,-1.E0,0.E0));
#799=DIRECTION('',(1.E0,0.E0,0.E0));
#800=AXIS2_PLACEMENT_3D('',#797,#798,#799);
#801=PLANE('',#800);
#802=ORIENTED_EDGE('',*,*,#671,.F.);
#804=ORIENTED_EDGE('',*,*,#803,.T.);
#806=ORIENTED_EDGE('',*,*,#805,.T.);
#807=ORIENTED_EDGE('',*,*,#789,.F.);
#808=EDGE_LOOP('',(#802,#804,#806,#807));
#809=FACE_OUTER_BOUND('',#808,.F.);
#810=ADVANCED_FACE('',(#809),#801,.T.);
#811=CARTESIAN_POINT('',(-5.35E1,-5.35E1,0.E0));
#812=DIRECTION('',(0.E0,0.E0,1.E0));
#813=DIRECTION('',(1.E0,0.E0,0.E0));
#814=AXIS2_PLACEMENT_3D('',#811,#812,#813);
#815=CYLINDRICAL_SURFACE('',#814,3.E0);
#816=ORIENTED_EDGE('',*,*,#669,.F.);
#818=ORIENTED_EDGE('',*,*,#817,.T.);
#820=ORIENTED_EDGE('',*,*,#819,.T.);
#821=ORIENTED_EDGE('',*,*,#803,.F.);
#822=EDGE_LOOP('',(#816,#818,#820,#821));
#823=FACE_OUTER_BOUND('',#822,.F.);
#824=ADVANCED_FACE('',(#823),#815,.T.);
#825=CARTESIAN_POINT('',(-5.65E1,5.35E1,0.E0));
#826=DIRECTION('',(-1.E0,0.E0,0.E0));
#827=DIRECTION('',(0.E0,-1.E0,0.E0));
#828=AXIS2_PLACEMENT_3D('',#825,#826,#827);
#829=PLANE('',#828);
#830=ORIENTED_EDGE('',*,*,#667,.F.);
#831=ORIENTED_EDGE('',*,*,#736,.T.);
#833=ORIENTED_EDGE('',*,*,#832,.T.);
#834=ORIENTED_EDGE('',*,*,#817,.F.);
#835=EDGE_LOOP('',(#830,#831,#833,#834));
#836=FACE_OUTER_BOUND('',#835,.F.);
#837=ADVANCED_FACE('',(#836),#829,.T.);
#838=CARTESIAN_POINT('',(0.E0,0.E0,3.E0));
#839=DIRECTION('',(0.E0,0.E0,1.E0));
#840=DIRECTION('',(1.E0,0.E0,0.E0));
#841=AXIS2_PLACEMENT_3D('',#838,#839,#840);
#842=PLANE('',#841);
#843=ORIENTED_EDGE('',*,*,#734,.F.);
#844=ORIENTED_EDGE('',*,*,#749,.F.);
#845=ORIENTED_EDGE('',*,*,#763,.F.);
#846=ORIENTED_EDGE('',*,*,#777,.F.);
#847=ORIENTED_EDGE('',*,*,#791,.F.);
#848=ORIENTED_EDGE('',*,*,#805,.F.);
#849=ORIENTED_EDGE('',*,*,#819,.F.);
#850=ORIENTED_EDGE('',*,*,#832,.F.);
#851=EDGE_LOOP('',(#843,#844,#845,#846,#847,#848,#849,#850));
#852=FACE_OUTER_BOUND('',#851,.F.);
#854=ORIENTED_EDGE('',*,*,#853,.F.);
#856=ORIENTED_EDGE('',*,*,#855,.F.);
#857=EDGE_LOOP('',(#854,#856));
#858=FACE_BOUND('',#857,.F.);
#860=ORIENTED_EDGE('',*,*,#859,.F.);
#862=ORIENTED_EDGE('',*,*,#861,.F.);
#863=EDGE_LOOP('',(#860,#862));
#864=FACE_BOUND('',#863,.F.);
#866=ORIENTED_EDGE('',*,*,#865,.F.);
#868=ORIENTED_EDGE('',*,*,#867,.F.);
#869=EDGE_LOOP('',(#866,#868));
#870=FACE_BOUND('',#869,.F.);
#872=ORIENTED_EDGE('',*,*,#871,.F.);
#874=ORIENTED_EDGE('',*,*,#873,.F.);
#875=EDGE_LOOP('',(#872,#874));
#876=FACE_BOUND('',#875,.F.);
#878=ORIENTED_EDGE('',*,*,#877,.T.);
#880=ORIENTED_EDGE('',*,*,#879,.T.);
#881=EDGE_LOOP('',(#878,#880));
#882=FACE_BOUND('',#881,.F.);
#884=ORIENTED_EDGE('',*,*,#883,.T.);
#886=ORIENTED_EDGE('',*,*,#885,.T.);
#887=EDGE_LOOP('',(#884,#886));
#888=FACE_BOUND('',#887,.F.);
#890=ORIENTED_EDGE('',*,*,#889,.T.);
#892=ORIENTED_EDGE('',*,*,#891,.T.);
#893=EDGE_LOOP('',(#890,#892));
#894=FACE_BOUND('',#893,.F.);
#896=ORIENTED_EDGE('',*,*,#895,.T.);
#898=ORIENTED_EDGE('',*,*,#897,.T.);
#899=EDGE_LOOP('',(#896,#898));
#900=FACE_BOUND('',#899,.F.);
#902=ORIENTED_EDGE('',*,*,#901,.T.);
#904=ORIENTED_EDGE('',*,*,#903,.F.);
#906=ORIENTED_EDGE('',*,*,#905,.T.);
#908=ORIENTED_EDGE('',*,*,#907,.F.);
#910=ORIENTED_EDGE('',*,*,#909,.T.);
#912=ORIENTED_EDGE('',*,*,#911,.F.);
#914=ORIENTED_EDGE('',*,*,#913,.T.);
#916=ORIENTED_EDGE('',*,*,#915,.F.);
#917=EDGE_LOOP('',(#902,#904,#906,#908,#910,#912,#914,#916));
#918=FACE_BOUND('',#917,.F.);
#919=ADVANCED_FACE('',(#852,#858,#864,#870,#876,#882,#888,#894,#900,#918),#842,
.T.);
#920=CARTESIAN_POINT('',(-5.E1,5.E1,1.750072621917E0));
#921=DIRECTION('',(0.E0,0.E0,1.E0));
#922=DIRECTION('',(0.E0,-1.E0,0.E0));
#923=AXIS2_PLACEMENT_3D('',#920,#921,#922);
#924=CONICAL_SURFACE('',#923,3.400020588949E0,4.499956158403E1);
#925=ORIENTED_EDGE('',*,*,#853,.T.);
#927=ORIENTED_EDGE('',*,*,#926,.T.);
#929=ORIENTED_EDGE('',*,*,#928,.F.);
#931=ORIENTED_EDGE('',*,*,#930,.F.);
#932=EDGE_LOOP('',(#925,#927,#929,#931));
#933=FACE_OUTER_BOUND('',#932,.F.);
#934=ADVANCED_FACE('',(#933),#924,.F.);
#935=CARTESIAN_POINT('',(-5.E1,5.E1,1.750072621917E0));
#936=DIRECTION('',(0.E0,0.E0,1.E0));
#937=DIRECTION('',(0.E0,-1.E0,0.E0));
#938=AXIS2_PLACEMENT_3D('',#935,#936,#937);
#939=CONICAL_SURFACE('',#938,3.400020588949E0,4.499956158403E1);
#940=ORIENTED_EDGE('',*,*,#855,.T.);
#941=ORIENTED_EDGE('',*,*,#930,.T.);
#943=ORIENTED_EDGE('',*,*,#942,.F.);
#944=ORIENTED_EDGE('',*,*,#926,.F.);
#945=EDGE_LOOP('',(#940,#941,#943,#944));
#946=FACE_OUTER_BOUND('',#945,.F.);
#947=ADVANCED_FACE('',(#946),#939,.F.);
#948=CARTESIAN_POINT('',(-5.E1,5.E1,3.E0));
#949=DIRECTION('',(0.E0,0.E0,-1.E0));
#950=DIRECTION('',(-1.E0,0.E0,0.E0));
#951=AXIS2_PLACEMENT_3D('',#948,#949,#950);
#952=CYLINDRICAL_SURFACE('',#951,2.15E0);
#953=ORIENTED_EDGE('',*,*,#942,.T.);
#955=ORIENTED_EDGE('',*,*,#954,.T.);
#956=ORIENTED_EDGE('',*,*,#685,.F.);
#958=ORIENTED_EDGE('',*,*,#957,.F.);
#959=EDGE_LOOP('',(#953,#955,#956,#958));
#960=FACE_OUTER_BOUND('',#959,.F.);
#961=ADVANCED_FACE('',(#960),#952,.F.);
#962=CARTESIAN_POINT('',(-5.E1,5.E1,3.E0));
#963=DIRECTION('',(0.E0,0.E0,-1.E0));
#964=DIRECTION('',(-1.E0,0.E0,0.E0));
#965=AXIS2_PLACEMENT_3D('',#962,#963,#964);
#966=CYLINDRICAL_SURFACE('',#965,2.15E0);
#967=ORIENTED_EDGE('',*,*,#928,.T.);
#968=ORIENTED_EDGE('',*,*,#957,.T.);
#969=ORIENTED_EDGE('',*,*,#683,.F.);
#970=ORIENTED_EDGE('',*,*,#954,.F.);
#971=EDGE_LOOP('',(#967,#968,#969,#970));
#972=FACE_OUTER_BOUND('',#971,.F.);
#973=ADVANCED_FACE('',(#972),#966,.F.);
#974=CARTESIAN_POINT('',(5.E1,5.E1,1.750072621917E0));
#975=DIRECTION('',(0.E0,0.E0,1.E0));
#976=DIRECTION('',(0.E0,-1.E0,0.E0));
#977=AXIS2_PLACEMENT_3D('',#974,#975,#976);
#978=CONICAL_SURFACE('',#977,3.400020588949E0,4.499956158403E1);
#979=ORIENTED_EDGE('',*,*,#859,.T.);
#981=ORIENTED_EDGE('',*,*,#980,.T.);
#983=ORIENTED_EDGE('',*,*,#982,.F.);
#985=ORIENTED_EDGE('',*,*,#984,.F.);
#986=EDGE_LOOP('',(#979,#981,#983,#985));
#987=FACE_OUTER_BOUND('',#986,.F.);
#988=ADVANCED_FACE('',(#987),#978,.F.);
#989=CARTESIAN_POINT('',(5.E1,5.E1,1.750072621917E0));
#990=DIRECTION('',(0.E0,0.E0,1.E0));
#991=DIRECTION('',(0.E0,-1.E0,0.E0));
#992=AXIS2_PLACEMENT_3D('',#989,#990,#991);
#993=CONICAL_SURFACE('',#992,3.400020588949E0,4.499956158403E1);
#994=ORIENTED_EDGE('',*,*,#861,.T.);
#995=ORIENTED_EDGE('',*,*,#984,.T.);
#997=ORIENTED_EDGE('',*,*,#996,.F.);
#998=ORIENTED_EDGE('',*,*,#980,.F.);
#999=EDGE_LOOP('',(#994,#995,#997,#998));
#1000=FACE_OUTER_BOUND('',#999,.F.);
#1001=ADVANCED_FACE('',(#1000),#993,.F.);
#1002=CARTESIAN_POINT('',(5.E1,5.E1,3.E0));
#1003=DIRECTION('',(0.E0,0.E0,-1.E0));
#1004=DIRECTION('',(-1.E0,0.E0,0.E0));
#1005=AXIS2_PLACEMENT_3D('',#1002,#1003,#1004);
#1006=CYLINDRICAL_SURFACE('',#1005,2.15E0);
#1007=ORIENTED_EDGE('',*,*,#996,.T.);
#1009=ORIENTED_EDGE('',*,*,#1008,.T.);
#1010=ORIENTED_EDGE('',*,*,#691,.F.);
#1012=ORIENTED_EDGE('',*,*,#1011,.F.);
#1013=EDGE_LOOP('',(#1007,#1009,#1010,#1012));
#1014=FACE_OUTER_BOUND('',#1013,.F.);
#1015=ADVANCED_FACE('',(#1014),#1006,.F.);
#1016=CARTESIAN_POINT('',(5.E1,5.E1,3.E0));
#1017=DIRECTION('',(0.E0,0.E0,-1.E0));
#1018=DIRECTION('',(-1.E0,0.E0,0.E0));
#1019=AXIS2_PLACEMENT_3D('',#1016,#1017,#1018);
#1020=CYLINDRICAL_SURFACE('',#1019,2.15E0);
#1021=ORIENTED_EDGE('',*,*,#982,.T.);
#1022=ORIENTED_EDGE('',*,*,#1011,.T.);
#1023=ORIENTED_EDGE('',*,*,#689,.F.);
#1024=ORIENTED_EDGE('',*,*,#1008,.F.);
#1025=EDGE_LOOP('',(#1021,#1022,#1023,#1024));
#1026=FACE_OUTER_BOUND('',#1025,.F.);
#1027=ADVANCED_FACE('',(#1026),#1020,.F.);
#1028=CARTESIAN_POINT('',(-5.E1,-5.E1,1.750072621917E0));
#1029=DIRECTION('',(0.E0,0.E0,1.E0));
#1030=DIRECTION('',(0.E0,-1.E0,0.E0));
#1031=AXIS2_PLACEMENT_3D('',#1028,#1029,#1030);
#1032=CONICAL_SURFACE('',#1031,3.400020588949E0,4.499956158403E1);
#1033=ORIENTED_EDGE('',*,*,#865,.T.);
#1035=ORIENTED_EDGE('',*,*,#1034,.T.);
#1037=ORIENTED_EDGE('',*,*,#1036,.F.);
#1039=ORIENTED_EDGE('',*,*,#1038,.F.);
#1040=EDGE_LOOP('',(#1033,#1035,#1037,#1039));
#1041=FACE_OUTER_BOUND('',#1040,.F.);
#1042=ADVANCED_FACE('',(#1041),#1032,.F.);
#1043=CARTESIAN_POINT('',(-5.E1,-5.E1,1.750072621917E0));
#1044=DIRECTION('',(0.E0,0.E0,1.E0));
#1045=DIRECTION('',(0.E0,-1.E0,0.E0));
#1046=AXIS2_PLACEMENT_3D('',#1043,#1044,#1045);
#1047=CONICAL_SURFACE('',#1046,3.400020588949E0,4.499956158403E1);
#1048=ORIENTED_EDGE('',*,*,#867,.T.);
#1049=ORIENTED_EDGE('',*,*,#1038,.T.);
#1051=ORIENTED_EDGE('',*,*,#1050,.F.);
#1052=ORIENTED_EDGE('',*,*,#1034,.F.);
#1053=EDGE_LOOP('',(#1048,#1049,#1051,#1052));
#1054=FACE_OUTER_BOUND('',#1053,.F.);
#1055=ADVANCED_FACE('',(#1054),#1047,.F.);
#1056=CARTESIAN_POINT('',(-5.E1,-5.E1,3.E0));
#1057=DIRECTION('',(0.E0,0.E0,-1.E0));
#1058=DIRECTION('',(-1.E0,0.E0,0.E0));
#1059=AXIS2_PLACEMENT_3D('',#1056,#1057,#1058);
#1060=CYLINDRICAL_SURFACE('',#1059,2.15E0);
#1061=ORIENTED_EDGE('',*,*,#1050,.T.);
#1063=ORIENTED_EDGE('',*,*,#1062,.T.);
#1064=ORIENTED_EDGE('',*,*,#697,.F.);
#1066=ORIENTED_EDGE('',*,*,#1065,.F.);
#1067=EDGE_LOOP('',(#1061,#1063,#1064,#1066));
#1068=FACE_OUTER_BOUND('',#1067,.F.);
#1069=ADVANCED_FACE('',(#1068),#1060,.F.);
#1070=CARTESIAN_POINT('',(-5.E1,-5.E1,3.E0));
#1071=DIRECTION('',(0.E0,0.E0,-1.E0));
#1072=DIRECTION('',(-1.E0,0.E0,0.E0));
#1073=AXIS2_PLACEMENT_3D('',#1070,#1071,#1072);
#1074=CYLINDRICAL_SURFACE('',#1073,2.15E0);
#1075=ORIENTED_EDGE('',*,*,#1036,.T.);
#1076=ORIENTED_EDGE('',*,*,#1065,.T.);
#1077=ORIENTED_EDGE('',*,*,#695,.F.);
#1078=ORIENTED_EDGE('',*,*,#1062,.F.);
#1079=EDGE_LOOP('',(#1075,#1076,#1077,#1078));
#1080=FACE_OUTER_BOUND('',#1079,.F.);
#1081=ADVANCED_FACE('',(#1080),#1074,.F.);
#1082=CARTESIAN_POINT('',(5.E1,-5.E1,1.750072621917E0));
#1083=DIRECTION('',(0.E0,0.E0,1.E0));
#1084=DIRECTION('',(0.E0,-1.E0,0.E0));
#1085=AXIS2_PLACEMENT_3D('',#1082,#1083,#1084);
#1086=CONICAL_SURFACE('',#1085,3.400020588949E0,4.499956158403E1);
#1087=ORIENTED_EDGE('',*,*,#871,.T.);
#1089=ORIENTED_EDGE('',*,*,#1088,.T.);
#1091=ORIENTED_EDGE('',*,*,#1090,.F.);
#1093=ORIENTED_EDGE('',*,*,#1092,.F.);
#1094=EDGE_LOOP('',(#1087,#1089,#1091,#1093));
#1095=FACE_OUTER_BOUND('',#1094,.F.);
#1096=ADVANCED_FACE('',(#1095),#1086,.F.);
#1097=CARTESIAN_POINT('',(5.E1,-5.E1,1.750072621917E0));
#1098=DIRECTION('',(0.E0,0.E0,1.E0));
#1099=DIRECTION('',(0.E0,-1.E0,0.E0));
#1100=AXIS2_PLACEMENT_3D('',#1097,#1098,#1099);
#1101=CONICAL_SURFACE('',#1100,3.400020588949E0,4.499956158403E1);
#1102=ORIENTED_EDGE('',*,*,#873,.T.);
#1103=ORIENTED_EDGE('',*,*,#1092,.T.);
#1105=ORIENTED_EDGE('',*,*,#1104,.F.);
#1106=ORIENTED_EDGE('',*,*,#1088,.F.);
#1107=EDGE_LOOP('',(#1102,#1103,#1105,#1106));
#1108=FACE_OUTER_BOUND('',#1107,.F.);
#1109=ADVANCED_FACE('',(#1108),#1101,.F.);
#1110=CARTESIAN_POINT('',(5.E1,-5.E1,3.E0));
#1111=DIRECTION('',(0.E0,0.E0,-1.E0));
#1112=DIRECTION('',(-1.E0,0.E0,0.E0));
#1113=AXIS2_PLACEMENT_3D('',#1110,#1111,#1112);
#1114=CYLINDRICAL_SURFACE('',#1113,2.15E0);
#1115=ORIENTED_EDGE('',*,*,#1104,.T.);
#1117=ORIENTED_EDGE('',*,*,#1116,.T.);
#1118=ORIENTED_EDGE('',*,*,#703,.F.);
#1120=ORIENTED_EDGE('',*,*,#1119,.F.);
#1121=EDGE_LOOP('',(#1115,#1117,#1118,#1120));
#1122=FACE_OUTER_BOUND('',#1121,.F.);
#1123=ADVANCED_FACE('',(#1122),#1114,.F.);
#1124=CARTESIAN_POINT('',(5.E1,-5.E1,3.E0));
#1125=DIRECTION('',(0.E0,0.E0,-1.E0));
#1126=DIRECTION('',(-1.E0,0.E0,0.E0));
#1127=AXIS2_PLACEMENT_3D('',#1124,#1125,#1126);
#1128=CYLINDRICAL_SURFACE('',#1127,2.15E0);
#1129=ORIENTED_EDGE('',*,*,#1090,.T.);
#1130=ORIENTED_EDGE('',*,*,#1119,.T.);
#1131=ORIENTED_EDGE('',*,*,#701,.F.);
#1132=ORIENTED_EDGE('',*,*,#1116,.F.);
#1133=EDGE_LOOP('',(#1129,#1130,#1131,#1132));
#1134=FACE_OUTER_BOUND('',#1133,.F.);
#1135=ADVANCED_FACE('',(#1134),#1128,.F.);
#1136=CARTESIAN_POINT('',(-3.75E1,3.75E1,3.E0));
#1137=DIRECTION('',(0.E0,0.E0,1.E0));
#1138=DIRECTION('',(1.E0,0.E0,0.E0));
#1139=AXIS2_PLACEMENT_3D('',#1136,#1137,#1138);
#1140=CYLINDRICAL_SURFACE('',#1139,2.5E0);
#1141=ORIENTED_EDGE('',*,*,#877,.F.);
#1143=ORIENTED_EDGE('',*,*,#1142,.T.);
#1145=ORIENTED_EDGE('',*,*,#1144,.T.);
#1147=ORIENTED_EDGE('',*,*,#1146,.F.);
#1148=EDGE_LOOP('',(#1141,#1143,#1145,#1147));
#1149=FACE_OUTER_BOUND('',#1148,.F.);
#1150=ADVANCED_FACE('',(#1149),#1140,.T.);
#1151=CARTESIAN_POINT('',(-3.75E1,3.75E1,3.E0));
#1152=DIRECTION('',(0.E0,0.E0,1.E0));
#1153=DIRECTION('',(1.E0,0.E0,0.E0));
#1154=AXIS2_PLACEMENT_3D('',#1151,#1152,#1153);
#1155=CYLINDRICAL_SURFACE('',#1154,2.5E0);
#1156=ORIENTED_EDGE('',*,*,#879,.F.);
#1157=ORIENTED_EDGE('',*,*,#1146,.T.);
#1159=ORIENTED_EDGE('',*,*,#1158,.T.);
#1160=ORIENTED_EDGE('',*,*,#1142,.F.);
#1161=EDGE_LOOP('',(#1156,#1157,#1159,#1160));
#1162=FACE_OUTER_BOUND('',#1161,.F.);
#1163=ADVANCED_FACE('',(#1162),#1155,.T.);
#1164=CARTESIAN_POINT('',(0.E0,0.E0,1.8E1));
#1165=DIRECTION('',(0.E0,0.E0,1.E0));
#1166=DIRECTION('',(1.E0,0.E0,0.E0));
#1167=AXIS2_PLACEMENT_3D('',#1164,#1165,#1166);
#1168=PLANE('',#1167);
#1169=ORIENTED_EDGE('',*,*,#1144,.F.);
#1170=ORIENTED_EDGE('',*,*,#1158,.F.);
#1171=EDGE_LOOP('',(#1169,#1170));
#1172=FACE_OUTER_BOUND('',#1171,.F.);
#1173=ADVANCED_FACE('',(#1172),#1168,.T.);
#1174=CARTESIAN_POINT('',(0.E0,0.E0,1.8E1));
#1175=DIRECTION('',(0.E0,0.E0,1.E0));
#1176=DIRECTION('',(1.E0,0.E0,0.E0));
#1177=AXIS2_PLACEMENT_3D('',#1174,#1175,#1176);
#1178=PLANE('',#1177);
#1180=ORIENTED_EDGE('',*,*,#1179,.F.);
#1182=ORIENTED_EDGE('',*,*,#1181,.F.);
#1183=EDGE_LOOP('',(#1180,#1182));
#1184=FACE_OUTER_BOUND('',#1183,.F.);
#1185=ADVANCED_FACE('',(#1184),#1178,.T.);
#1186=CARTESIAN_POINT('',(0.E0,0.E0,1.8E1));
#1187=DIRECTION('',(0.E0,0.E0,1.E0));
#1188=DIRECTION('',(1.E0,0.E0,0.E0));
#1189=AXIS2_PLACEMENT_3D('',#1186,#1187,#1188);
#1190=PLANE('',#1189);
#1192=ORIENTED_EDGE('',*,*,#1191,.F.);
#1194=ORIENTED_EDGE('',*,*,#1193,.F.);
#1195=EDGE_LOOP('',(#1192,#1194));
#1196=FACE_OUTER_BOUND('',#1195,.F.);
#1197=ADVANCED_FACE('',(#1196),#1190,.T.);
#1198=CARTESIAN_POINT('',(0.E0,0.E0,1.8E1));
#1199=DIRECTION('',(0.E0,0.E0,1.E0));
#1200=DIRECTION('',(1.E0,0.E0,0.E0));
#1201=AXIS2_PLACEMENT_3D('',#1198,#1199,#1200);
#1202=PLANE('',#1201);
#1204=ORIENTED_EDGE('',*,*,#1203,.F.);
#1206=ORIENTED_EDGE('',*,*,#1205,.F.);
#1207=EDGE_LOOP('',(#1204,#1206));
#1208=FACE_OUTER_BOUND('',#1207,.F.);
#1209=ADVANCED_FACE('',(#1208),#1202,.T.);
#1210=CARTESIAN_POINT('',(3.75E1,3.75E1,3.E0));
#1211=DIRECTION('',(0.E0,0.E0,1.E0));
#1212=DIRECTION('',(1.E0,0.E0,0.E0));
#1213=AXIS2_PLACEMENT_3D('',#1210,#1211,#1212);
#1214=CYLINDRICAL_SURFACE('',#1213,2.5E0);
#1215=ORIENTED_EDGE('',*,*,#883,.F.);
#1217=ORIENTED_EDGE('',*,*,#1216,.T.);
#1218=ORIENTED_EDGE('',*,*,#1179,.T.);
#1220=ORIENTED_EDGE('',*,*,#1219,.F.);
#1221=EDGE_LOOP('',(#1215,#1217,#1218,#1220));
#1222=FACE_OUTER_BOUND('',#1221,.F.);
#1223=ADVANCED_FACE('',(#1222),#1214,.T.);
#1224=CARTESIAN_POINT('',(3.75E1,3.75E1,3.E0));
#1225=DIRECTION('',(0.E0,0.E0,1.E0));
#1226=DIRECTION('',(1.E0,0.E0,0.E0));
#1227=AXIS2_PLACEMENT_3D('',#1224,#1225,#1226);
#1228=CYLINDRICAL_SURFACE('',#1227,2.5E0);
#1229=ORIENTED_EDGE('',*,*,#885,.F.);
#1230=ORIENTED_EDGE('',*,*,#1219,.T.);
#1231=ORIENTED_EDGE('',*,*,#1181,.T.);
#1232=ORIENTED_EDGE('',*,*,#1216,.F.);
#1233=EDGE_LOOP('',(#1229,#1230,#1231,#1232));
#1234=FACE_OUTER_BOUND('',#1233,.F.);
#1235=ADVANCED_FACE('',(#1234),#1228,.T.);
#1236=CARTESIAN_POINT('',(3.75E1,-3.75E1,3.E0));
#1237=DIRECTION('',(0.E0,0.E0,1.E0));
#1238=DIRECTION('',(1.E0,0.E0,0.E0));
#1239=AXIS2_PLACEMENT_3D('',#1236,#1237,#1238);
#1240=CYLINDRICAL_SURFACE('',#1239,2.5E0);
#1241=ORIENTED_EDGE('',*,*,#889,.F.);
#1243=ORIENTED_EDGE('',*,*,#1242,.T.);
#1244=ORIENTED_EDGE('',*,*,#1191,.T.);
#1246=ORIENTED_EDGE('',*,*,#1245,.F.);
#1247=EDGE_LOOP('',(#1241,#1243,#1244,#1246));
#1248=FACE_OUTER_BOUND('',#1247,.F.);
#1249=ADVANCED_FACE('',(#1248),#1240,.T.);
#1250=CARTESIAN_POINT('',(3.75E1,-3.75E1,3.E0));
#1251=DIRECTION('',(0.E0,0.E0,1.E0));
#1252=DIRECTION('',(1.E0,0.E0,0.E0));
#1253=AXIS2_PLACEMENT_3D('',#1250,#1251,#1252);
#1254=CYLINDRICAL_SURFACE('',#1253,2.5E0);
#1255=ORIENTED_EDGE('',*,*,#891,.F.);
#1256=ORIENTED_EDGE('',*,*,#1245,.T.);
#1257=ORIENTED_EDGE('',*,*,#1193,.T.);
#1258=ORIENTED_EDGE('',*,*,#1242,.F.);
#1259=EDGE_LOOP('',(#1255,#1256,#1257,#1258));
#1260=FACE_OUTER_BOUND('',#1259,.F.);
#1261=ADVANCED_FACE('',(#1260),#1254,.T.);
#1262=CARTESIAN_POINT('',(-3.75E1,-3.75E1,3.E0));
#1263=DIRECTION('',(0.E0,0.E0,1.E0));
#1264=DIRECTION('',(1.E0,0.E0,0.E0));
#1265=AXIS2_PLACEMENT_3D('',#1262,#1263,#1264);
#1266=CYLINDRICAL_SURFACE('',#1265,2.5E0);
#1267=ORIENTED_EDGE('',*,*,#895,.F.);
#1269=ORIENTED_EDGE('',*,*,#1268,.T.);
#1270=ORIENTED_EDGE('',*,*,#1203,.T.);
#1272=ORIENTED_EDGE('',*,*,#1271,.F.);
#1273=EDGE_LOOP('',(#1267,#1269,#1270,#1272));
#1274=FACE_OUTER_BOUND('',#1273,.F.);
#1275=ADVANCED_FACE('',(#1274),#1266,.T.);
#1276=CARTESIAN_POINT('',(-3.75E1,-3.75E1,3.E0));
#1277=DIRECTION('',(0.E0,0.E0,1.E0));
#1278=DIRECTION('',(1.E0,0.E0,0.E0));
#1279=AXIS2_PLACEMENT_3D('',#1276,#1277,#1278);
#1280=CYLINDRICAL_SURFACE('',#1279,2.5E0);
#1281=ORIENTED_EDGE('',*,*,#897,.F.);
#1282=ORIENTED_EDGE('',*,*,#1271,.T.);
#1283=ORIENTED_EDGE('',*,*,#1205,.T.);
#1284=ORIENTED_EDGE('',*,*,#1268,.F.);
#1285=EDGE_LOOP('',(#1281,#1282,#1283,#1284));
#1286=FACE_OUTER_BOUND('',#1285,.F.);
#1287=ADVANCED_FACE('',(#1286),#1280,.T.);
#1288=CARTESIAN_POINT('',(3.E1,-3.E1,3.E0));
#1289=DIRECTION('',(1.E0,0.E0,0.E0));
#1290=DIRECTION('',(0.E0,1.E0,0.E0));
#1291=AXIS2_PLACEMENT_3D('',#1288,#1289,#1290);
#1292=PLANE('',#1291);
#1294=ORIENTED_EDGE('',*,*,#1293,.F.);
#1295=ORIENTED_EDGE('',*,*,#901,.F.);
#1297=ORIENTED_EDGE('',*,*,#1296,.T.);
#1298=ORIENTED_EDGE('',*,*,#711,.T.);
#1299=EDGE_LOOP('',(#1294,#1295,#1297,#1298));
#1300=FACE_OUTER_BOUND('',#1299,.F.);
#1301=ADVANCED_FACE('',(#1300),#1292,.F.);
#1302=CARTESIAN_POINT('',(2.7E1,2.7E1,3.15648E0));
#1303=DIRECTION('',(0.E0,0.E0,-1.E0));
#1304=DIRECTION('',(0.E0,1.E0,0.E0));
#1305=AXIS2_PLACEMENT_3D('',#1302,#1303,#1304);
#1306=CYLINDRICAL_SURFACE('',#1305,3.E0);
#1308=ORIENTED_EDGE('',*,*,#1307,.F.);
#1309=ORIENTED_EDGE('',*,*,#903,.T.);
#1310=ORIENTED_EDGE('',*,*,#1293,.T.);
#1311=ORIENTED_EDGE('',*,*,#709,.T.);
#1312=EDGE_LOOP('',(#1308,#1309,#1310,#1311));
#1313=FACE_OUTER_BOUND('',#1312,.F.);
#1314=ADVANCED_FACE('',(#1313),#1306,.F.);
#1315=CARTESIAN_POINT('',(3.E1,3.E1,3.E0));
#1316=DIRECTION('',(0.E0,1.E0,0.E0));
#1317=DIRECTION('',(-1.E0,0.E0,0.E0));
#1318=AXIS2_PLACEMENT_3D('',#1315,#1316,#1317);
#1319=PLANE('',#1318);
#1321=ORIENTED_EDGE('',*,*,#1320,.F.);
#1322=ORIENTED_EDGE('',*,*,#905,.F.);
#1323=ORIENTED_EDGE('',*,*,#1307,.T.);
#1324=ORIENTED_EDGE('',*,*,#707,.T.);
#1325=EDGE_LOOP('',(#1321,#1322,#1323,#1324));
#1326=FACE_OUTER_BOUND('',#1325,.F.);
#1327=ADVANCED_FACE('',(#1326),#1319,.F.);
#1328=CARTESIAN_POINT('',(-2.7E1,2.7E1,3.15648E0));
#1329=DIRECTION('',(0.E0,0.E0,-1.E0));
#1330=DIRECTION('',(-1.E0,0.E0,0.E0));
#1331=AXIS2_PLACEMENT_3D('',#1328,#1329,#1330);
#1332=CYLINDRICAL_SURFACE('',#1331,3.E0);
#1334=ORIENTED_EDGE('',*,*,#1333,.F.);
#1335=ORIENTED_EDGE('',*,*,#907,.T.);
#1336=ORIENTED_EDGE('',*,*,#1320,.T.);
#1337=ORIENTED_EDGE('',*,*,#721,.T.);
#1338=EDGE_LOOP('',(#1334,#1335,#1336,#1337));
#1339=FACE_OUTER_BOUND('',#1338,.F.);
#1340=ADVANCED_FACE('',(#1339),#1332,.F.);
#1341=CARTESIAN_POINT('',(-3.E1,3.E1,3.E0));
#1342=DIRECTION('',(-1.E0,0.E0,0.E0));
#1343=DIRECTION('',(0.E0,-1.E0,0.E0));
#1344=AXIS2_PLACEMENT_3D('',#1341,#1342,#1343);
#1345=PLANE('',#1344);
#1346=ORIENTED_EDGE('',*,*,#1333,.T.);
#1347=ORIENTED_EDGE('',*,*,#719,.T.);
#1349=ORIENTED_EDGE('',*,*,#1348,.F.);
#1350=ORIENTED_EDGE('',*,*,#909,.F.);
#1351=EDGE_LOOP('',(#1346,#1347,#1349,#1350));
#1352=FACE_OUTER_BOUND('',#1351,.F.);
#1353=ADVANCED_FACE('',(#1352),#1345,.F.);
#1354=CARTESIAN_POINT('',(-2.7E1,-2.7E1,3.15648E0));
#1355=DIRECTION('',(0.E0,0.E0,-1.E0));
#1356=DIRECTION('',(0.E0,-1.E0,0.E0));
#1357=AXIS2_PLACEMENT_3D('',#1354,#1355,#1356);
#1358=CYLINDRICAL_SURFACE('',#1357,3.E0);
#1360=ORIENTED_EDGE('',*,*,#1359,.F.);
#1361=ORIENTED_EDGE('',*,*,#911,.T.);
#1362=ORIENTED_EDGE('',*,*,#1348,.T.);
#1363=ORIENTED_EDGE('',*,*,#717,.T.);
#1364=EDGE_LOOP('',(#1360,#1361,#1362,#1363));
#1365=FACE_OUTER_BOUND('',#1364,.F.);
#1366=ADVANCED_FACE('',(#1365),#1358,.F.);
#1367=CARTESIAN_POINT('',(-3.E1,-3.E1,3.E0));
#1368=DIRECTION('',(0.E0,-1.E0,0.E0));
#1369=DIRECTION('',(1.E0,0.E0,0.E0));
#1370=AXIS2_PLACEMENT_3D('',#1367,#1368,#1369);
#1371=PLANE('',#1370);
#1373=ORIENTED_EDGE('',*,*,#1372,.F.);
#1374=ORIENTED_EDGE('',*,*,#913,.F.);
#1375=ORIENTED_EDGE('',*,*,#1359,.T.);
#1376=ORIENTED_EDGE('',*,*,#715,.T.);
#1377=EDGE_LOOP('',(#1373,#1374,#1375,#1376));
#1378=FACE_OUTER_BOUND('',#1377,.F.);
#1379=ADVANCED_FACE('',(#1378),#1371,.F.);
#1380=CARTESIAN_POINT('',(2.7E1,-2.7E1,3.15648E0));
#1381=DIRECTION('',(0.E0,0.E0,-1.E0));
#1382=DIRECTION('',(1.E0,0.E0,0.E0));
#1383=AXIS2_PLACEMENT_3D('',#1380,#1381,#1382);
#1384=CYLINDRICAL_SURFACE('',#1383,3.E0);
#1385=ORIENTED_EDGE('',*,*,#1296,.F.);
#1386=ORIENTED_EDGE('',*,*,#915,.T.);
#1387=ORIENTED_EDGE('',*,*,#1372,.T.);
#1388=ORIENTED_EDGE('',*,*,#713,.T.);
#1389=EDGE_LOOP('',(#1385,#1386,#1387,#1388));
#1390=FACE_OUTER_BOUND('',#1389,.F.);
#1391=ADVANCED_FACE('',(#1390),#1384,.F.);
#1392=CLOSED_SHELL('',(#725,#740,#754,#768,#782,#796,#810,#824,#837,#919,#934,
#947,#961,#973,#988,#1001,#1015,#1027,#1042,#1055,#1069,#1081,#1096,#1109,#1123,
#1135,#1150,#1163,#1173,#1185,#1197,#1209,#1223,#1235,#1249,#1261,#1275,#1287,
#1301,#1314,#1327,#1340,#1353,#1366,#1379,#1391));
#1393=MANIFOLD_SOLID_BREP('',#1392);
#1394=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1395=DIRECTION('',(0.E0,0.E0,1.E0));
#1396=DIRECTION('',(1.E0,0.E0,0.E0));
#1397=AXIS2_PLACEMENT_3D('C_0',#1394,#1395,#1396);
#1398=DIRECTION('',(1.E0,0.E0,0.E0));
#1399=VECTOR('',#1398,1.13E2);
#1400=CARTESIAN_POINT('',(-5.65E1,0.E0,0.E0));
#1401=LINE('',#1400,#1399);
#1404=DIRECTION('',(0.E0,0.E0,-1.E0));
#1405=VECTOR('',#1404,5.001853940548E-1);
#1406=CARTESIAN_POINT('',(-5.E1,5.E1,5.001853940548E-1));
#1407=LINE('',#1406,#1405);
#1409=DIRECTION('',(0.E0,0.E0,-1.E0));
#1410=VECTOR('',#1409,5.001853940548E-1);
#1411=CARTESIAN_POINT('',(5.E1,5.E1,5.001853940548E-1));
#1412=LINE('',#1411,#1410);
#1414=DIRECTION('',(0.E0,0.E0,-1.E0));
#1415=VECTOR('',#1414,5.001853940548E-1);
#1416=CARTESIAN_POINT('',(-5.E1,-5.E1,5.001853940548E-1));
#1417=LINE('',#1416,#1415);
#1419=DIRECTION('',(0.E0,0.E0,-1.E0));
#1420=VECTOR('',#1419,5.001853940548E-1);
#1421=CARTESIAN_POINT('',(5.E1,-5.E1,5.001853940548E-1));
#1422=LINE('',#1421,#1420);
#1424=DIRECTION('',(0.E0,0.E0,1.E0));
#1425=VECTOR('',#1424,1.5E1);
#1426=CARTESIAN_POINT('',(-3.75E1,3.75E1,3.E0));
#1427=LINE('',#1426,#1425);
#1429=DIRECTION('',(0.E0,0.E0,1.E0));
#1430=VECTOR('',#1429,1.5E1);
#1431=CARTESIAN_POINT('',(3.75E1,3.75E1,3.E0));
#1432=LINE('',#1431,#1430);
#1434=DIRECTION('',(0.E0,0.E0,1.E0));
#1435=VECTOR('',#1434,1.5E1);
#1436=CARTESIAN_POINT('',(3.75E1,-3.75E1,3.E0));
#1437=LINE('',#1436,#1435);
#1439=DIRECTION('',(0.E0,0.E0,1.E0));
#1440=VECTOR('',#1439,1.5E1);
#1441=CARTESIAN_POINT('',(-3.75E1,-3.75E1,3.E0));
#1442=LINE('',#1441,#1440);
#1444=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1445=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1446=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1447=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1446);
#1448=(CONVERSION_BASED_UNIT('DEGREE',#1447)NAMED_UNIT(#1445)PLANE_ANGLE_UNIT(
));
#1449=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1450=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-2),#1444,'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1451=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1450))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1444,#1448,#1449))REPRESENTATION_CONTEXT(
'ID1','3'));
#1452=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1453=DIRECTION('',(0.E0,0.E0,1.E0));
#1454=DIRECTION('',(1.E0,0.E0,0.E0));
#1403=GEOMETRIC_SET('',(#1402,#1408,#1413,#1418,#1423,#1428,#1433,#1438,#1443));
#1457=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1458=DIRECTION('',(0.E0,0.E0,1.E0));
#1459=DIRECTION('',(1.E0,0.E0,0.E0));
#1462=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1463=DIRECTION('',(0.E0,0.E0,1.E0));
#1464=DIRECTION('',(1.E0,0.E0,0.E0));
#1467=SHAPE_REPRESENTATION_RELATIONSHIP('','',#1466,#1456);
#1468=SHAPE_REPRESENTATION_RELATIONSHIP('','',#1466,#1461);
#1469=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#1470=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#1469);
#1471=DESIGN_CONTEXT('',#1469,'design');
#1472=MECHANICAL_CONTEXT('',#1469,'mechanical');
#1473=PRODUCT('1_28-04_008','1_28-04_008','NOT SPECIFIED',(#1472));
#1474=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('15','LAST_VERSION',
#1473,.MADE.);
#1483=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1484=DIRECTION('',(0.E0,0.E0,1.E0));
#1485=DIRECTION('',(1.E0,0.E0,0.E0));
#1486=AXIS2_PLACEMENT_3D('',#1483,#1484,#1485);
#1487=ITEM_DEFINED_TRANSFORMATION('','',#1465,#1486);
#1488=(REPRESENTATION_RELATIONSHIP('','',#1466,#1480)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1487)SHAPE_REPRESENTATION_RELATIONSHIP());
#1489=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1488,#1482);
#1490=CARTESIAN_POINT('',(-2.65E0,0.E0,0.E0));
#1491=DIRECTION('',(0.E0,1.E0,0.E0));
#1492=DIRECTION('',(1.E0,0.E0,0.E0));
#1493=AXIS2_PLACEMENT_3D('',#1490,#1491,#1492);
#1495=DIRECTION('',(0.E0,-1.E0,0.E0));
#1496=VECTOR('',#1495,1.E0);
#1497=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1498=LINE('',#1497,#1496);
#1499=CARTESIAN_POINT('',(-2.65E0,0.E0,0.E0));
#1500=DIRECTION('',(0.E0,-1.E0,0.E0));
#1501=DIRECTION('',(1.E0,0.E0,0.E0));
#1502=AXIS2_PLACEMENT_3D('',#1499,#1500,#1501);
#1504=DIRECTION('',(0.E0,-1.E0,0.E0));
#1505=VECTOR('',#1504,1.E0);
#1506=CARTESIAN_POINT('',(-5.3E0,0.E0,0.E0));
#1507=LINE('',#1506,#1505);
#1508=CARTESIAN_POINT('',(-2.65E0,0.E0,0.E0));
#1509=DIRECTION('',(0.E0,1.E0,0.E0));
#1510=DIRECTION('',(1.E0,0.E0,0.E0));
#1511=AXIS2_PLACEMENT_3D('',#1508,#1509,#1510);
#1513=CARTESIAN_POINT('',(-2.65E0,0.E0,0.E0));
#1514=DIRECTION('',(0.E0,-1.E0,0.E0));
#1515=DIRECTION('',(1.E0,0.E0,0.E0));
#1516=AXIS2_PLACEMENT_3D('',#1513,#1514,#1515);
#1518=CARTESIAN_POINT('',(-2.65E0,-1.E0,0.E0));
#1519=DIRECTION('',(0.E0,1.E0,0.E0));
#1520=DIRECTION('',(1.E0,0.E0,0.E0));
#1521=AXIS2_PLACEMENT_3D('',#1518,#1519,#1520);
#1523=DIRECTION('',(0.E0,1.E0,0.E0));
#1524=VECTOR('',#1523,1.E0);
#1525=CARTESIAN_POINT('',(2.35E0,-1.E0,0.E0));
#1526=LINE('',#1525,#1524);
#1527=CARTESIAN_POINT('',(-2.65E0,-1.E0,0.E0));
#1528=DIRECTION('',(0.E0,-1.E0,0.E0));
#1529=DIRECTION('',(1.E0,0.E0,0.E0));
#1530=AXIS2_PLACEMENT_3D('',#1527,#1528,#1529);
#1532=DIRECTION('',(0.E0,1.E0,0.E0));
#1533=VECTOR('',#1532,1.E0);
#1534=CARTESIAN_POINT('',(-7.65E0,-1.E0,0.E0));
#1535=LINE('',#1534,#1533);
#1536=CARTESIAN_POINT('',(-2.65E0,-1.E0,0.E0));
#1537=DIRECTION('',(0.E0,1.E0,0.E0));
#1538=DIRECTION('',(1.E0,0.E0,0.E0));
#1539=AXIS2_PLACEMENT_3D('',#1536,#1537,#1538);
#1541=CARTESIAN_POINT('',(-2.65E0,-1.E0,0.E0));
#1542=DIRECTION('',(0.E0,-1.E0,0.E0));
#1543=DIRECTION('',(1.E0,0.E0,0.E0));
#1544=AXIS2_PLACEMENT_3D('',#1541,#1542,#1543);
#1546=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1547=CARTESIAN_POINT('',(0.E0,-1.E0,0.E0));
#1548=VERTEX_POINT('',#1546);
#1549=VERTEX_POINT('',#1547);
#1550=CARTESIAN_POINT('',(2.35E0,-1.E0,0.E0));
#1551=CARTESIAN_POINT('',(2.35E0,0.E0,0.E0));
#1552=VERTEX_POINT('',#1550);
#1553=VERTEX_POINT('',#1551);
#1554=CARTESIAN_POINT('',(-5.3E0,0.E0,0.E0));
#1555=CARTESIAN_POINT('',(-5.3E0,-1.E0,0.E0));
#1556=VERTEX_POINT('',#1554);
#1557=VERTEX_POINT('',#1555);
#1558=CARTESIAN_POINT('',(-7.65E0,-1.E0,0.E0));
#1559=CARTESIAN_POINT('',(-7.65E0,0.E0,0.E0));
#1560=VERTEX_POINT('',#1558);
#1561=VERTEX_POINT('',#1559);
#1562=CARTESIAN_POINT('',(-2.65E0,-1.05E0,0.E0));
#1563=DIRECTION('',(0.E0,1.E0,0.E0));
#1564=DIRECTION('',(1.E0,0.E0,0.E0));
#1565=AXIS2_PLACEMENT_3D('',#1562,#1563,#1564);
#1566=CYLINDRICAL_SURFACE('',#1565,2.65E0);
#1568=ORIENTED_EDGE('',*,*,#1567,.T.);
#1570=ORIENTED_EDGE('',*,*,#1569,.T.);
#1572=ORIENTED_EDGE('',*,*,#1571,.F.);
#1574=ORIENTED_EDGE('',*,*,#1573,.F.);
#1575=EDGE_LOOP('',(#1568,#1570,#1572,#1574));
#1576=FACE_OUTER_BOUND('',#1575,.F.);
#1577=ADVANCED_FACE('',(#1576),#1566,.F.);
#1578=CARTESIAN_POINT('',(-2.65E0,-1.05E0,0.E0));
#1579=DIRECTION('',(0.E0,1.E0,0.E0));
#1580=DIRECTION('',(1.E0,0.E0,0.E0));
#1581=AXIS2_PLACEMENT_3D('',#1578,#1579,#1580);
#1582=CYLINDRICAL_SURFACE('',#1581,2.65E0);
#1583=ORIENTED_EDGE('',*,*,#1567,.F.);
#1585=ORIENTED_EDGE('',*,*,#1584,.T.);
#1586=ORIENTED_EDGE('',*,*,#1571,.T.);
#1588=ORIENTED_EDGE('',*,*,#1587,.F.);
#1589=EDGE_LOOP('',(#1583,#1585,#1586,#1588));
#1590=FACE_OUTER_BOUND('',#1589,.F.);
#1591=ADVANCED_FACE('',(#1590),#1582,.F.);
#1592=CARTESIAN_POINT('',(-2.65E0,0.E0,0.E0));
#1593=DIRECTION('',(0.E0,1.E0,0.E0));
#1594=DIRECTION('',(1.E0,0.E0,0.E0));
#1595=AXIS2_PLACEMENT_3D('',#1592,#1593,#1594);
#1596=PLANE('',#1595);
#1598=ORIENTED_EDGE('',*,*,#1597,.F.);
#1600=ORIENTED_EDGE('',*,*,#1599,.T.);
#1601=EDGE_LOOP('',(#1598,#1600));
#1602=FACE_OUTER_BOUND('',#1601,.F.);
#1603=ORIENTED_EDGE('',*,*,#1584,.F.);
#1604=ORIENTED_EDGE('',*,*,#1573,.T.);
#1605=EDGE_LOOP('',(#1603,#1604));
#1606=FACE_BOUND('',#1605,.F.);
#1607=ADVANCED_FACE('',(#1602,#1606),#1596,.T.);
#1608=CARTESIAN_POINT('',(-2.65E0,-1.05E0,0.E0));
#1609=DIRECTION('',(0.E0,1.E0,0.E0));
#1610=DIRECTION('',(1.E0,0.E0,0.E0));
#1611=AXIS2_PLACEMENT_3D('',#1608,#1609,#1610);
#1612=CYLINDRICAL_SURFACE('',#1611,5.E0);
#1614=ORIENTED_EDGE('',*,*,#1613,.T.);
#1615=ORIENTED_EDGE('',*,*,#1597,.T.);
#1617=ORIENTED_EDGE('',*,*,#1616,.F.);
#1619=ORIENTED_EDGE('',*,*,#1618,.F.);
#1620=EDGE_LOOP('',(#1614,#1615,#1617,#1619));
#1621=FACE_OUTER_BOUND('',#1620,.F.);
#1622=ADVANCED_FACE('',(#1621),#1612,.T.);
#1623=CARTESIAN_POINT('',(-2.65E0,-1.05E0,0.E0));
#1624=DIRECTION('',(0.E0,1.E0,0.E0));
#1625=DIRECTION('',(1.E0,0.E0,0.E0));
#1626=AXIS2_PLACEMENT_3D('',#1623,#1624,#1625);
#1627=CYLINDRICAL_SURFACE('',#1626,5.E0);
#1628=ORIENTED_EDGE('',*,*,#1613,.F.);
#1630=ORIENTED_EDGE('',*,*,#1629,.T.);
#1631=ORIENTED_EDGE('',*,*,#1616,.T.);
#1632=ORIENTED_EDGE('',*,*,#1599,.F.);
#1633=EDGE_LOOP('',(#1628,#1630,#1631,#1632));
#1634=FACE_OUTER_BOUND('',#1633,.F.);
#1635=ADVANCED_FACE('',(#1634),#1627,.T.);
#1636=CARTESIAN_POINT('',(-2.65E0,-1.E0,0.E0));
#1637=DIRECTION('',(0.E0,1.E0,0.E0));
#1638=DIRECTION('',(1.E0,0.E0,0.E0));
#1639=AXIS2_PLACEMENT_3D('',#1636,#1637,#1638);
#1640=PLANE('',#1639);
#1641=ORIENTED_EDGE('',*,*,#1629,.F.);
#1642=ORIENTED_EDGE('',*,*,#1618,.T.);
#1643=EDGE_LOOP('',(#1641,#1642));
#1644=FACE_OUTER_BOUND('',#1643,.F.);
#1645=ORIENTED_EDGE('',*,*,#1569,.F.);
#1646=ORIENTED_EDGE('',*,*,#1587,.T.);
#1647=EDGE_LOOP('',(#1645,#1646));
#1648=FACE_BOUND('',#1647,.F.);
#1649=ADVANCED_FACE('',(#1644,#1648),#1640,.F.);
#1650=CLOSED_SHELL('',(#1577,#1591,#1607,#1622,#1635,#1649));
#1651=MANIFOLD_SOLID_BREP('',#1650);
#1652=DIRECTION('',(0.E0,1.E0,0.E0));
#1653=VECTOR('',#1652,1.E0);
#1654=CARTESIAN_POINT('',(-2.65E0,-1.E0,0.E0));
#1655=LINE('',#1654,#1653);
#1658=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1659=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1660=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1661=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1660);
#1662=(CONVERSION_BASED_UNIT('DEGREE',#1661)NAMED_UNIT(#1659)PLANE_ANGLE_UNIT(
));
#1663=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1664=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.417899662314E-3),#1658,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1665=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1664))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1658,#1662,#1663))REPRESENTATION_CONTEXT(
'ID2','3'));
#1666=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1667=DIRECTION('',(0.E0,0.E0,1.E0));
#1668=DIRECTION('',(1.E0,0.E0,0.E0));
#1657=GEOMETRIC_SET('',(#1656));
#1671=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1672=DIRECTION('',(0.E0,0.E0,1.E0));
#1673=DIRECTION('',(1.E0,0.E0,0.E0));
#1676=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1677=DIRECTION('',(0.E0,0.E0,1.E0));
#1678=DIRECTION('',(1.E0,0.E0,0.E0));
#1681=SHAPE_REPRESENTATION_RELATIONSHIP('','',#1680,#1670);
#1682=SHAPE_REPRESENTATION_RELATIONSHIP('','',#1680,#1675);
#1683=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#1684=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#1683);
#1685=DESIGN_CONTEXT('',#1683,'design');
#1686=MECHANICAL_CONTEXT('',#1683,'mechanical');
#1687=PRODUCT('D125T1A5_3','D125T1A5_3','NOT SPECIFIED',(#1686));
#1688=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('8','LAST_VERSION',
#1687,.MADE.);
#1694=CARTESIAN_POINT('',(3.485E1,3.75E1,1.1E1));
#1695=DIRECTION('',(0.E0,1.E0,0.E0));
#1696=DIRECTION('',(-1.E0,0.E0,0.E0));
#1697=AXIS2_PLACEMENT_3D('',#1694,#1695,#1696);
#1698=ITEM_DEFINED_TRANSFORMATION('','',#1679,#1697);
#1699=(REPRESENTATION_RELATIONSHIP('','',#1680,#1480)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1698)SHAPE_REPRESENTATION_RELATIONSHIP());
#1700=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1699,#1693);
#1703=CARTESIAN_POINT('',(-4.015E1,3.75E1,1.2E1));
#1704=DIRECTION('',(0.E0,1.E0,0.E0));
#1705=DIRECTION('',(-1.E0,0.E0,0.E0));
#1706=AXIS2_PLACEMENT_3D('',#1703,#1704,#1705);
#1707=ITEM_DEFINED_TRANSFORMATION('','',#1679,#1706);
#1708=(REPRESENTATION_RELATIONSHIP('','',#1680,#1480)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1707)SHAPE_REPRESENTATION_RELATIONSHIP());
#1709=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1708,#1702);
#1712=CARTESIAN_POINT('',(3.485E1,-3.75E1,1.2E1));
#1713=DIRECTION('',(0.E0,1.E0,0.E0));
#1714=DIRECTION('',(-1.E0,0.E0,0.E0));
#1715=AXIS2_PLACEMENT_3D('',#1712,#1713,#1714);
#1716=ITEM_DEFINED_TRANSFORMATION('','',#1679,#1715);
#1717=(REPRESENTATION_RELATIONSHIP('','',#1680,#1480)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1716)SHAPE_REPRESENTATION_RELATIONSHIP());
#1718=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1717,#1711);
#1721=CARTESIAN_POINT('',(-4.015E1,-3.75E1,1.2E1));
#1722=DIRECTION('',(0.E0,1.E0,0.E0));
#1723=DIRECTION('',(-1.E0,0.E0,0.E0));
#1724=AXIS2_PLACEMENT_3D('',#1721,#1722,#1723);
#1725=ITEM_DEFINED_TRANSFORMATION('','',#1679,#1724);
#1726=(REPRESENTATION_RELATIONSHIP('','',#1680,#1480)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1725)SHAPE_REPRESENTATION_RELATIONSHIP());
#1727=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1726,#1720);
#1728=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1729=DIRECTION('',(0.E0,0.E0,1.E0));
#1730=DIRECTION('',(-5.000000001014E-1,8.660254037259E-1,0.E0));
#1731=AXIS2_PLACEMENT_3D('',#1728,#1729,#1730);
#1733=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1734=DIRECTION('',(0.E0,0.E0,1.E0));
#1735=DIRECTION('',(-1.E0,2.960779047282E-13,0.E0));
#1736=AXIS2_PLACEMENT_3D('',#1733,#1734,#1735);
#1738=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1739=DIRECTION('',(0.E0,0.E0,1.E0));
#1740=DIRECTION('',(5.000000005961E-1,-8.660254034403E-1,0.E0));
#1741=AXIS2_PLACEMENT_3D('',#1738,#1739,#1740);
#1743=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1744=DIRECTION('',(0.E0,0.E0,1.E0));
#1745=DIRECTION('',(1.E0,1.541917813335E-13,0.E0));
#1746=AXIS2_PLACEMENT_3D('',#1743,#1744,#1745);
#1748=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1749=DIRECTION('',(0.E0,0.E0,1.E0));
#1750=DIRECTION('',(0.E0,1.E0,0.E0));
#1751=AXIS2_PLACEMENT_3D('',#1748,#1749,#1750);
#1753=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1754=DIRECTION('',(0.E0,0.E0,1.E0));
#1755=DIRECTION('',(0.E0,-1.E0,0.E0));
#1756=AXIS2_PLACEMENT_3D('',#1753,#1754,#1755);
#1758=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1759=DIRECTION('',(0.E0,0.E0,-1.E0));
#1760=DIRECTION('',(-5.000000001014E-1,8.660254037259E-1,0.E0));
#1761=AXIS2_PLACEMENT_3D('',#1758,#1759,#1760);
#1763=CARTESIAN_POINT('',(-4.E0,2.309401076759E0,2.842157059823E0));
#1764=CARTESIAN_POINT('',(-4.E0,2.146005755148E0,2.889325226281E0));
#1765=CARTESIAN_POINT('',(-3.999993504156E0,1.824481291838E0,2.974569783520E0));
#1766=CARTESIAN_POINT('',(-4.000022735454E0,1.362045684538E0,3.073466950580E0));
#1767=CARTESIAN_POINT('',(-3.999915554028E0,9.064543909026E-1,
3.145538756069E0));
#1768=CARTESIAN_POINT('',(-4.000315048432E0,4.532557716665E-1,
3.189273647719E0));
#1769=CARTESIAN_POINT('',(-3.999321184305E0,1.510095879713E-1,
3.199917156121E0));
#1770=CARTESIAN_POINT('',(-3.999321184305E0,-1.914550133235E-10,
3.199904763472E0));
#1772=CARTESIAN_POINT('',(-3.999321184305E0,-1.914550133150E-10,
3.199904763472E0));
#1773=CARTESIAN_POINT('',(-3.999321184305E0,-1.510408019284E-1,
3.199917158666E0));
#1774=CARTESIAN_POINT('',(-4.000315048432E0,-4.533374775267E-1,
3.189269446483E0));
#1775=CARTESIAN_POINT('',(-3.999915554028E0,-9.065789535296E-1,
3.145523725269E0));
#1776=CARTESIAN_POINT('',(-4.000022735454E0,-1.362171504523E0,
3.073441174664E0));
#1777=CARTESIAN_POINT('',(-3.999993504156E0,-1.824424549609E0,
2.974581552471E0));
#1778=CARTESIAN_POINT('',(-4.E0,-2.145977734322E0,2.889333315197E0));
#1779=CARTESIAN_POINT('',(-4.E0,-2.309401076759E0,2.842157059823E0));
#1781=CARTESIAN_POINT('',(-3.999653564188E0,5.979031226827E-10,
1.609047724090E-4));
#1782=CARTESIAN_POINT('',(-3.999653564188E0,-1.510407989539E-1,
1.924759837622E-4));
#1783=CARTESIAN_POINT('',(-4.000160785999E0,-4.533374775904E-1,
1.067967037813E-2));
#1784=CARTESIAN_POINT('',(-3.999956902722E0,-9.065789526425E-1,
5.448991340738E-2));
#1785=CARTESIAN_POINT('',(-4.000011603113E0,-1.362171504158E0,
1.265551532768E-1));
#1786=CARTESIAN_POINT('',(-3.999996684825E0,-1.824424549363E0,
2.254194966062E-1));
#1787=CARTESIAN_POINT('',(-4.E0,-2.145977734245E0,3.106666847814E-1));
#1788=CARTESIAN_POINT('',(-4.E0,-2.309401076759E0,3.578429401774E-1));
#1790=CARTESIAN_POINT('',(-4.E0,2.309401076759E0,3.578429401774E-1));
#1791=CARTESIAN_POINT('',(-4.E0,2.146005755225E0,3.106747737414E-1));
#1792=CARTESIAN_POINT('',(-3.999996684825E0,1.824481292029E0,
2.254312655868E-1));
#1793=CARTESIAN_POINT('',(-4.000011603113E0,1.362045685091E0,
1.265293778350E-1));
#1794=CARTESIAN_POINT('',(-3.999956902722E0,9.064543910954E-1,
5.447488164719E-2));
#1795=CARTESIAN_POINT('',(-4.000160785999E0,4.532557741933E-1,
1.067547349211E-2));
#1796=CARTESIAN_POINT('',(-3.999653564188E0,1.510095853644E-1,
1.924694647087E-4));
#1797=CARTESIAN_POINT('',(-3.999653564188E0,5.979031226285E-10,
1.609047724090E-4));
#1799=DIRECTION('',(0.E0,0.E0,1.E0));
#1800=VECTOR('',#1799,2.484314119645E0);
#1801=CARTESIAN_POINT('',(-4.E0,2.309401076759E0,3.578429401774E-1));
#1802=LINE('',#1801,#1800);
#1803=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#1804=DIRECTION('',(0.E0,0.E0,1.E0));
#1805=DIRECTION('',(5.000000316182E-1,-8.660253855296E-1,0.E0));
#1806=AXIS2_PLACEMENT_3D('',#1803,#1804,#1805);
#1808=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#1809=DIRECTION('',(0.E0,0.E0,1.E0));
#1810=DIRECTION('',(1.E0,-1.714796653198E-13,0.E0));
#1811=AXIS2_PLACEMENT_3D('',#1808,#1809,#1810);
#1813=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#1814=DIRECTION('',(0.E0,0.E0,1.E0));
#1815=DIRECTION('',(5.000000329081E-1,8.660253847849E-1,0.E0));
#1816=AXIS2_PLACEMENT_3D('',#1813,#1814,#1815);
#1818=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#1819=DIRECTION('',(0.E0,0.E0,1.E0));
#1820=DIRECTION('',(0.E0,1.E0,0.E0));
#1821=AXIS2_PLACEMENT_3D('',#1818,#1819,#1820);
#1823=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#1824=DIRECTION('',(0.E0,0.E0,1.E0));
#1825=DIRECTION('',(-5.000000316240E-1,8.660253855263E-1,0.E0));
#1826=AXIS2_PLACEMENT_3D('',#1823,#1824,#1825);
#1828=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#1829=DIRECTION('',(0.E0,0.E0,1.E0));
#1830=DIRECTION('',(-1.E0,2.959471047132E-13,0.E0));
#1831=AXIS2_PLACEMENT_3D('',#1828,#1829,#1830);
#1833=DIRECTION('',(-3.754850895886E-12,0.E0,1.E0));
#1834=VECTOR('',#1833,1.3E0);
#1835=CARTESIAN_POINT('',(0.E0,-3.999E0,3.2E0));
#1836=LINE('',#1835,#1834);
#1837=CARTESIAN_POINT('',(0.E0,0.E0,5.E0));
#1838=DIRECTION('',(0.E0,0.E0,1.E0));
#1839=DIRECTION('',(0.E0,-1.E0,0.E0));
#1840=AXIS2_PLACEMENT_3D('',#1837,#1838,#1839);
#1842=CARTESIAN_POINT('',(0.E0,0.E0,4.5E0));
#1843=DIRECTION('',(0.E0,0.E0,1.E0));
#1844=DIRECTION('',(0.E0,-1.E0,0.E0));
#1845=AXIS2_PLACEMENT_3D('',#1842,#1843,#1844);
#1847=CARTESIAN_POINT('',(0.E0,-3.499E0,4.5E0));
#1848=DIRECTION('',(1.E0,0.E0,0.E0));
#1849=DIRECTION('',(0.E0,0.E0,1.E0));
#1850=AXIS2_PLACEMENT_3D('',#1847,#1848,#1849);
#1852=CARTESIAN_POINT('',(0.E0,0.E0,5.E0));
#1853=DIRECTION('',(0.E0,0.E0,-1.E0));
#1854=DIRECTION('',(0.E0,-1.E0,0.E0));
#1855=AXIS2_PLACEMENT_3D('',#1852,#1853,#1854);
#1857=CARTESIAN_POINT('',(0.E0,0.E0,5.E0));
#1858=DIRECTION('',(0.E0,0.E0,-1.E0));
#1859=DIRECTION('',(0.E0,1.E0,0.E0));
#1860=AXIS2_PLACEMENT_3D('',#1857,#1858,#1859);
#1862=DIRECTION('',(0.E0,0.E0,1.E0));
#1863=VECTOR('',#1862,1.8E0);
#1864=CARTESIAN_POINT('',(0.E0,-2.E0,3.2E0));
#1865=LINE('',#1864,#1863);
#1866=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#1867=DIRECTION('',(0.E0,0.E0,-1.E0));
#1868=DIRECTION('',(0.E0,-1.E0,0.E0));
#1869=AXIS2_PLACEMENT_3D('',#1866,#1867,#1868);
#1871=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#1872=DIRECTION('',(0.E0,0.E0,-1.E0));
#1873=DIRECTION('',(0.E0,1.E0,0.E0));
#1874=AXIS2_PLACEMENT_3D('',#1871,#1872,#1873);
#1876=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#1877=DIRECTION('',(0.E0,0.E0,1.E0));
#1878=DIRECTION('',(0.E0,1.E0,0.E0));
#1879=AXIS2_PLACEMENT_3D('',#1876,#1877,#1878);
#1881=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#1882=DIRECTION('',(0.E0,0.E0,1.E0));
#1883=DIRECTION('',(0.E0,-1.E0,0.E0));
#1884=AXIS2_PLACEMENT_3D('',#1881,#1882,#1883);
#1886=DIRECTION('',(0.E0,0.E0,1.E0));
#1887=VECTOR('',#1886,1.8E0);
#1888=CARTESIAN_POINT('',(0.E0,2.E0,3.2E0));
#1889=LINE('',#1888,#1887);
#1890=CARTESIAN_POINT('',(0.E0,0.E0,2.911324865405E0));
#1891=DIRECTION('',(0.E0,0.E0,1.E0));
#1892=DIRECTION('',(0.E0,1.E0,0.E0));
#1893=AXIS2_PLACEMENT_3D('',#1890,#1891,#1892);
#1895=CARTESIAN_POINT('',(0.E0,0.E0,2.911324865405E0));
#1896=DIRECTION('',(0.E0,0.E0,1.E0));
#1897=DIRECTION('',(-1.E0,0.E0,0.E0));
#1898=AXIS2_PLACEMENT_3D('',#1895,#1896,#1897);
#1900=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#1901=VECTOR('',#1900,5.773502691896E-1);
#1902=CARTESIAN_POINT('',(0.E0,-2.E0,2.911324865405E0));
#1903=LINE('',#1902,#1901);
#1904=CARTESIAN_POINT('',(0.E0,0.E0,2.911324865405E0));
#1905=DIRECTION('',(0.E0,0.E0,1.E0));
#1906=DIRECTION('',(0.E0,-1.E0,0.E0));
#1907=AXIS2_PLACEMENT_3D('',#1904,#1905,#1906);
#1909=CARTESIAN_POINT('',(0.E0,0.E0,2.911324865405E0));
#1910=DIRECTION('',(0.E0,0.E0,1.E0));
#1911=DIRECTION('',(1.E0,0.E0,0.E0));
#1912=AXIS2_PLACEMENT_3D('',#1909,#1910,#1911);
#1914=DIRECTION('',(0.E0,8.660254037844E-1,5.E-1));
#1915=VECTOR('',#1914,5.773502691896E-1);
#1916=CARTESIAN_POINT('',(0.E0,2.E0,2.911324865405E0));
#1917=LINE('',#1916,#1915);
#1918=DIRECTION('',(0.E0,0.E0,1.E0));
#1919=VECTOR('',#1918,2.622649730810E0);
#1920=CARTESIAN_POINT('',(-2.E0,0.E0,2.886751345948E-1));
#1921=LINE('',#1920,#1919);
#1922=DIRECTION('',(0.E0,0.E0,1.E0));
#1923=VECTOR('',#1922,2.622649730810E0);
#1924=CARTESIAN_POINT('',(2.E0,0.E0,2.886751345948E-1));
#1925=LINE('',#1924,#1923);
#1926=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#1927=VECTOR('',#1926,5.773502691896E-1);
#1928=CARTESIAN_POINT('',(0.E0,2.5E0,0.E0));
#1929=LINE('',#1928,#1927);
#1930=CARTESIAN_POINT('',(0.E0,0.E0,2.886751345948E-1));
#1931=DIRECTION('',(0.E0,0.E0,1.E0));
#1932=DIRECTION('',(1.E0,0.E0,0.E0));
#1933=AXIS2_PLACEMENT_3D('',#1930,#1931,#1932);
#1935=CARTESIAN_POINT('',(0.E0,0.E0,2.886751345948E-1));
#1936=DIRECTION('',(0.E0,0.E0,1.E0));
#1937=DIRECTION('',(0.E0,-1.E0,0.E0));
#1938=AXIS2_PLACEMENT_3D('',#1935,#1936,#1937);
#1940=DIRECTION('',(0.E0,8.660254037844E-1,5.E-1));
#1941=VECTOR('',#1940,5.773502691896E-1);
#1942=CARTESIAN_POINT('',(0.E0,-2.5E0,0.E0));
#1943=LINE('',#1942,#1941);
#1944=CARTESIAN_POINT('',(0.E0,0.E0,2.886751345948E-1));
#1945=DIRECTION('',(0.E0,0.E0,1.E0));
#1946=DIRECTION('',(-1.E0,0.E0,0.E0));
#1947=AXIS2_PLACEMENT_3D('',#1944,#1945,#1946);
#1949=CARTESIAN_POINT('',(0.E0,0.E0,2.886751345948E-1));
#1950=DIRECTION('',(0.E0,0.E0,1.E0));
#1951=DIRECTION('',(0.E0,1.E0,0.E0));
#1952=AXIS2_PLACEMENT_3D('',#1949,#1950,#1951);
#1954=CARTESIAN_POINT('',(0.E0,0.E0,5.E0));
#1955=DIRECTION('',(0.E0,0.E0,1.E0));
#1956=DIRECTION('',(0.E0,1.E0,0.E0));
#1957=AXIS2_PLACEMENT_3D('',#1954,#1955,#1956);
#1959=CARTESIAN_POINT('',(0.E0,0.E0,4.5E0));
#1960=DIRECTION('',(0.E0,0.E0,1.E0));
#1961=DIRECTION('',(0.E0,1.E0,0.E0));
#1962=AXIS2_PLACEMENT_3D('',#1959,#1960,#1961);
#1964=CARTESIAN_POINT('',(0.E0,3.499E0,4.5E0));
#1965=DIRECTION('',(-1.E0,0.E0,0.E0));
#1966=DIRECTION('',(0.E0,0.E0,1.E0));
#1967=AXIS2_PLACEMENT_3D('',#1964,#1965,#1966);
#1969=DIRECTION('',(3.754882288199E-12,0.E0,1.E0));
#1970=VECTOR('',#1969,1.3E0);
#1971=CARTESIAN_POINT('',(0.E0,3.999E0,3.2E0));
#1972=LINE('',#1971,#1970);
#1973=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#1974=DIRECTION('',(0.E0,0.E0,1.E0));
#1975=DIRECTION('',(0.E0,-1.E0,0.E0));
#1976=AXIS2_PLACEMENT_3D('',#1973,#1974,#1975);
#1978=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#1979=DIRECTION('',(0.E0,0.E0,1.E0));
#1980=DIRECTION('',(-5.000000340934E-1,-8.660253841006E-1,0.E0));
#1981=AXIS2_PLACEMENT_3D('',#1978,#1979,#1980);
#1983=CARTESIAN_POINT('',(0.E0,-4.618802153517E0,2.842157059823E0));
#1984=CARTESIAN_POINT('',(1.415044990670E-1,-4.537104492889E0,
2.889325226178E0));
#1985=CARTESIAN_POINT('',(4.199496041894E-1,-4.376336635744E0,
2.974569783256E0));
#1986=CARTESIAN_POINT('',(8.204452003955E-1,-4.145144148834E0,
3.073466950172E0));
#1987=CARTESIAN_POINT('',(1.214945250775E0,-3.917255676199E0,3.145538755730E0));
#1988=CARTESIAN_POINT('',(1.607626484903E0,-3.691002356012E0,3.189273647209E0));
#1989=CARTESIAN_POINT('',(1.868882498782E0,-3.539018511526E0,3.199917156510E0));
#1990=CARTESIAN_POINT('',(1.999660635919E0,-3.463513718846E0,3.199904763166E0));
#1992=CARTESIAN_POINT('',(1.999660635919E0,-3.463513718846E0,3.199904763166E0));
#1993=CARTESIAN_POINT('',(2.130465809658E0,-3.387993316576E0,3.199917157659E0));
#1994=CARTESIAN_POINT('',(2.392759269604E0,-3.237705731415E0,3.189269447281E0));
#1995=CARTESIAN_POINT('',(2.785078184962E0,-3.010739003983E0,3.145523725531E0));
#1996=CARTESIAN_POINT('',(3.179686491550E0,-2.783035554302E0,3.073441175093E0));
#1997=CARTESIAN_POINT('',(3.579994758899E0,-2.551883715020E0,2.974581552730E0));
#1998=CARTESIAN_POINT('',(3.858471233571E0,-2.391112748154E0,2.889333315299E0));
#1999=CARTESIAN_POINT('',(4.E0,-2.309401076759E0,2.842157059823E0));
#2001=CARTESIAN_POINT('',(1.999826783759E0,-3.463801593141E0,
1.609053614344E-4));
#2002=CARTESIAN_POINT('',(2.130631952671E0,-3.388281193658E0,
1.924766026214E-4));
#2003=CARTESIAN_POINT('',(2.392682165407E0,-3.237572120367E0,
1.067967015991E-2));
#2004=CARTESIAN_POINT('',(2.785098855527E0,-3.010774815255E0,
5.448991356539E-2));
#2005=CARTESIAN_POINT('',(3.179680928802E0,-2.783025911418E0,
1.265551533388E-1));
#2006=CARTESIAN_POINT('',(3.579996349647E0,-2.551886469327E0,
2.254194966681E-1));
#2007=CARTESIAN_POINT('',(3.858471233876E0,-2.391112747978E0,
3.106666848028E-1));
#2008=CARTESIAN_POINT('',(4.E0,-2.309401076759E0,3.578429401774E-1));
#2010=CARTESIAN_POINT('',(0.E0,-4.618802153517E0,3.578429401773E-1));
#2011=CARTESIAN_POINT('',(1.415044993722E-1,-4.537104492713E0,
3.106747737199E-1));
#2012=CARTESIAN_POINT('',(4.199511949832E-1,-4.376339390024E0,
2.254312655360E-1));
#2013=CARTESIAN_POINT('',(8.204396374872E-1,-4.145134506042E0,
1.265293777337E-1));
#2014=CARTESIAN_POINT('',(1.214965921942E0,-3.917291487124E0,
5.447488163532E-2));
#2015=CARTESIAN_POINT('',(1.607549378462E0,-3.690868746259E0,
1.067547316518E-2));
#2016=CARTESIAN_POINT('',(1.869048646629E0,-3.539306385817E0,
1.924700204818E-4));
#2017=CARTESIAN_POINT('',(1.999826783759E0,-3.463801593141E0,
1.609053614344E-4));
#2019=DIRECTION('',(0.E0,0.E0,1.E0));
#2020=VECTOR('',#2019,2.484314119645E0);
#2021=CARTESIAN_POINT('',(0.E0,-4.618802153517E0,3.578429401773E-1));
#2022=LINE('',#2021,#2020);
#2023=CARTESIAN_POINT('',(4.E0,-2.309401076759E0,2.842157059823E0));
#2024=CARTESIAN_POINT('',(4.E0,-2.146005755148E0,2.889325226281E0));
#2025=CARTESIAN_POINT('',(3.999993504156E0,-1.824481291838E0,2.974569783520E0));
#2026=CARTESIAN_POINT('',(4.000022735454E0,-1.362045684538E0,3.073466950580E0));
#2027=CARTESIAN_POINT('',(3.999915554028E0,-9.064543909028E-1,
3.145538756069E0));
#2028=CARTESIAN_POINT('',(4.000315048432E0,-4.532557716673E-1,
3.189273647719E0));
#2029=CARTESIAN_POINT('',(3.999321184305E0,-1.510095879710E-1,
3.199917156121E0));
#2030=CARTESIAN_POINT('',(3.999321184305E0,1.914776324912E-10,
3.199904763472E0));
#2032=CARTESIAN_POINT('',(3.999321184305E0,1.914776324828E-10,
3.199904763472E0));
#2033=CARTESIAN_POINT('',(3.999321184305E0,1.510408019287E-1,3.199917158666E0));
#2034=CARTESIAN_POINT('',(4.000315048432E0,4.533374775260E-1,3.189269446484E0));
#2035=CARTESIAN_POINT('',(3.999915554028E0,9.065789535294E-1,3.145523725269E0));
#2036=CARTESIAN_POINT('',(4.000022735454E0,1.362171504523E0,3.073441174664E0));
#2037=CARTESIAN_POINT('',(3.999993504156E0,1.824424549609E0,2.974581552471E0));
#2038=CARTESIAN_POINT('',(4.E0,2.145977734322E0,2.889333315197E0));
#2039=CARTESIAN_POINT('',(4.E0,2.309401076759E0,2.842157059823E0));
#2041=CARTESIAN_POINT('',(3.999653564188E0,-8.383917451883E-10,
1.609047727333E-4));
#2042=CARTESIAN_POINT('',(3.999653564188E0,1.510407989872E-1,
1.924759841628E-4));
#2043=CARTESIAN_POINT('',(4.000160785999E0,4.533374769800E-1,
1.067967034573E-2));
#2044=CARTESIAN_POINT('',(3.999956902722E0,9.065789524130E-1,
5.448991336961E-2));
#2045=CARTESIAN_POINT('',(4.000011603113E0,1.362171503946E0,1.265551532382E-1));
#2046=CARTESIAN_POINT('',(3.999996684825E0,1.824424549266E0,2.254194965800E-1));
#2047=CARTESIAN_POINT('',(4.E0,2.145977734210E0,3.106666847713E-1));
#2048=CARTESIAN_POINT('',(4.E0,2.309401076759E0,3.578429401774E-1));
#2050=CARTESIAN_POINT('',(4.E0,-2.309401076759E0,3.578429401774E-1));
#2051=CARTESIAN_POINT('',(4.E0,-2.146005755259E0,3.106747737514E-1));
#2052=CARTESIAN_POINT('',(3.999996684825E0,-1.824481292127E0,
2.254312656129E-1));
#2053=CARTESIAN_POINT('',(4.000011603113E0,-1.362045685302E0,
1.265293778736E-1));
#2054=CARTESIAN_POINT('',(3.999956902722E0,-9.064543913249E-1,
5.447488168505E-2));
#2055=CARTESIAN_POINT('',(4.000160785999E0,-4.532557748037E-1,
1.067547352421E-2));
#2056=CARTESIAN_POINT('',(3.999653564188E0,-1.510095853311E-1,
1.924694649555E-4));
#2057=CARTESIAN_POINT('',(3.999653564188E0,-8.383917451883E-10,
1.609047727333E-4));
#2059=DIRECTION('',(0.E0,0.E0,1.E0));
#2060=VECTOR('',#2059,2.484314119645E0);
#2061=CARTESIAN_POINT('',(4.E0,-2.309401076759E0,3.578429401774E-1));
#2062=LINE('',#2061,#2060);
#2063=CARTESIAN_POINT('',(4.E0,2.309401076759E0,2.842157059823E0));
#2064=CARTESIAN_POINT('',(3.858495501059E0,2.391098737313E0,2.889325226136E0));
#2065=CARTESIAN_POINT('',(3.580043901225E0,2.551855342685E0,2.974569783131E0));
#2066=CARTESIAN_POINT('',(3.179577532669E0,2.783098461741E0,3.073466950059E0));
#2067=CARTESIAN_POINT('',(2.784970315827E0,3.010801282256E0,3.145538755387E0));
#2068=CARTESIAN_POINT('',(2.392688521967E0,3.237746577582E0,3.189273647758E0));
#2069=CARTESIAN_POINT('',(2.130438779749E0,3.388008922302E0,3.199917155034E0));
#2070=CARTESIAN_POINT('',(1.999660643610E0,3.463513714406E0,3.199904763165E0));
#2072=CARTESIAN_POINT('',(1.999660643610E0,3.463513714406E0,3.199904763165E0));
#2073=CARTESIAN_POINT('',(1.868855468873E0,3.539034117252E0,3.199917159134E0));
#2074=CARTESIAN_POINT('',(1.607555737266E0,3.691043202179E0,3.189269446732E0));
#2075=CARTESIAN_POINT('',(1.214837381641E0,3.917317954473E0,3.145523725874E0));
#2076=CARTESIAN_POINT('',(8.203362415147E-1,4.145207056273E0,3.073441175206E0));
#2077=CARTESIAN_POINT('',(4.199987465154E-1,4.376308263408E0,2.974581552854E0));
#2078=CARTESIAN_POINT('',(1.415287665553E-1,4.537090482048E0,2.889333315341E0));
#2079=CARTESIAN_POINT('',(0.E0,4.618802153517E0,2.842157059823E0));
#2081=CARTESIAN_POINT('',(1.999826786554E0,3.463801591527E0,1.609053617700E-4));
#2082=CARTESIAN_POINT('',(1.869021614720E0,3.539321992697E0,1.924765383464E-4));
#2083=CARTESIAN_POINT('',(1.607478625455E0,3.690909595526E0,1.067966979276E-2));
#2084=CARTESIAN_POINT('',(1.214858050086E0,3.917353766969E0,5.448991309126E-2));
#2085=CARTESIAN_POINT('',(8.203306764473E-1,4.145197414727E0,
1.265551528653E-1));
#2086=CARTESIAN_POINT('',(4.200003362536E-1,4.376311018298E0,
2.254194963452E-1));
#2087=CARTESIAN_POINT('',(1.415287664936E-1,4.537090482084E0,
3.106666846795E-1));
#2088=CARTESIAN_POINT('',(0.E0,4.618802153517E0,3.578429401774E-1));
#2090=CARTESIAN_POINT('',(4.E0,2.309401076759E0,3.578429401774E-1));
#2091=CARTESIAN_POINT('',(3.858495500998E0,2.391098737349E0,3.106747738433E-1));
#2092=CARTESIAN_POINT('',(3.580045490917E0,2.551858097601E0,2.254312658590E-1));
#2093=CARTESIAN_POINT('',(3.179571967764E0,2.783088820103E0,1.265293782074E-1));
#2094=CARTESIAN_POINT('',(2.784990983672E0,3.010837095100E0,5.447488210948E-2));
#2095=CARTESIAN_POINT('',(2.392611412400E0,3.237612969634E0,1.067547353198E-2));
#2096=CARTESIAN_POINT('',(2.130604920763E0,3.388296800538E0,1.924700854099E-4));
#2097=CARTESIAN_POINT('',(1.999826786554E0,3.463801591527E0,1.609053617700E-4));
#2099=DIRECTION('',(0.E0,0.E0,1.E0));
#2100=VECTOR('',#2099,2.484314119645E0);
#2101=CARTESIAN_POINT('',(4.E0,2.309401076759E0,3.578429401774E-1));
#2102=LINE('',#2101,#2100);
#2103=CARTESIAN_POINT('',(0.E0,4.618802153517E0,2.842157059823E0));
#2104=CARTESIAN_POINT('',(-1.415044989713E-1,4.537104492944E0,
2.889325226146E0));
#2105=CARTESIAN_POINT('',(-4.199496039201E-1,4.376336635899E0,
2.974569783172E0));
#2106=CARTESIAN_POINT('',(-8.204451998115E-1,4.145144149171E0,
3.073466950049E0));
#2107=CARTESIAN_POINT('',(-1.214945250142E0,3.917255676564E0,3.145538755610E0));
#2108=CARTESIAN_POINT('',(-1.607626483214E0,3.691002356988E0,3.189273647106E0));
#2109=CARTESIAN_POINT('',(-1.868882498884E0,3.539018511467E0,3.199917156510E0));
#2110=CARTESIAN_POINT('',(-1.999660635265E0,3.463513719223E0,3.199904763166E0));
#2112=CARTESIAN_POINT('',(-1.999660635265E0,3.463513719223E0,3.199904763166E0));
#2113=CARTESIAN_POINT('',(-2.130465809760E0,3.387993316517E0,3.199917157659E0));
#2114=CARTESIAN_POINT('',(-2.392759267915E0,3.237705732391E0,3.189269447383E0));
#2115=CARTESIAN_POINT('',(-2.785078184329E0,3.010739004348E0,3.145523725652E0));
#2116=CARTESIAN_POINT('',(-3.179686490966E0,2.783035554639E0,3.073441175216E0));
#2117=CARTESIAN_POINT('',(-3.579994758630E0,2.551883715176E0,2.974581552813E0));
#2118=CARTESIAN_POINT('',(-3.858471233475E0,2.391112748210E0,2.889333315331E0));
#2119=CARTESIAN_POINT('',(-4.E0,2.309401076759E0,2.842157059823E0));
#2121=CARTESIAN_POINT('',(-1.999826782771E0,3.463801593711E0,
1.609053614341E-4));
#2122=CARTESIAN_POINT('',(-2.130631951682E0,3.388281194229E0,
1.924765777205E-4));
#2123=CARTESIAN_POINT('',(-2.392682165869E0,3.237572120100E0,
1.067967017166E-2));
#2124=CARTESIAN_POINT('',(-2.785098855406E0,3.010774815325E0,
5.448991356252E-2));
#2125=CARTESIAN_POINT('',(-3.179680928836E0,2.783025911398E0,
1.265551533398E-1));
#2126=CARTESIAN_POINT('',(-3.579996349638E0,2.551886469332E0,
2.254194966680E-1));
#2127=CARTESIAN_POINT('',(-3.858471233876E0,2.391112747978E0,
3.106666848028E-1));
#2128=CARTESIAN_POINT('',(-4.E0,2.309401076759E0,3.578429401774E-1));
#2130=CARTESIAN_POINT('',(0.E0,4.618802153517E0,3.578429401774E-1));
#2131=CARTESIAN_POINT('',(-1.415044993724E-1,4.537104492713E0,
3.106747737199E-1));
#2132=CARTESIAN_POINT('',(-4.199511949742E-1,4.376339390029E0,
2.254312655361E-1));
#2133=CARTESIAN_POINT('',(-8.204396375214E-1,4.145134506022E0,
1.265293777326E-1));
#2134=CARTESIAN_POINT('',(-1.214965921820E0,3.917291487194E0,
5.447488163819E-2));
#2135=CARTESIAN_POINT('',(-1.607549378925E0,3.690868745992E0,
1.067547315343E-2));
#2136=CARTESIAN_POINT('',(-1.869048645639E0,3.539306386388E0,
1.924700453769E-4));
#2137=CARTESIAN_POINT('',(-1.999826782771E0,3.463801593711E0,
1.609053614341E-4));
#2139=DIRECTION('',(0.E0,0.E0,1.E0));
#2140=VECTOR('',#2139,2.484314119645E0);
#2141=CARTESIAN_POINT('',(0.E0,4.618802153517E0,3.578429401774E-1));
#2142=LINE('',#2141,#2140);
#2143=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2144=DIRECTION('',(0.E0,0.E0,-1.E0));
#2145=DIRECTION('',(5.000000005961E-1,-8.660254034403E-1,0.E0));
#2146=AXIS2_PLACEMENT_3D('',#2143,#2144,#2145);
#2148=CARTESIAN_POINT('',(-4.E0,-2.309401076759E0,2.842157059823E0));
#2149=CARTESIAN_POINT('',(-3.858495500681E0,-2.391098737532E0,
2.889325226262E0));
#2150=CARTESIAN_POINT('',(-3.580043900184E0,-2.551855343287E0,
2.974569783461E0));
#2151=CARTESIAN_POINT('',(-3.179577530271E0,-2.783098463126E0,
3.073466950548E0));
#2152=CARTESIAN_POINT('',(-2.784970313645E0,-3.010801283516E0,
3.145538755856E0));
#2153=CARTESIAN_POINT('',(-2.392688514080E0,-3.237746582136E0,
3.189273648198E0));
#2154=CARTESIAN_POINT('',(-2.130438782734E0,-3.388008920578E0,
3.199917154962E0));
#2155=CARTESIAN_POINT('',(-1.999660643603E0,-3.463513714409E0,
3.199904763166E0));
#2157=CARTESIAN_POINT('',(-1.999660643603E0,-3.463513714409E0,
3.199904763166E0));
#2158=CARTESIAN_POINT('',(-1.868855471857E0,-3.539034115528E0,
3.199917159208E0));
#2159=CARTESIAN_POINT('',(-1.607555729379E0,-3.691043206733E0,
3.189269446291E0));
#2160=CARTESIAN_POINT('',(-1.214837379459E0,-3.917317955732E0,
3.145523725406E0));
#2161=CARTESIAN_POINT('',(-8.203362391176E-1,-4.145207057657E0,
3.073441174716E0));
#2162=CARTESIAN_POINT('',(-4.199987454739E-1,-4.376308264010E0,
2.974581552524E0));
#2163=CARTESIAN_POINT('',(-1.415287661765E-1,-4.537090482267E0,
2.889333315215E0));
#2164=CARTESIAN_POINT('',(0.E0,-4.618802153517E0,2.842157059823E0));
#2166=CARTESIAN_POINT('',(-1.999826784241E0,-3.463801592862E0,
1.609053616557E-4));
#2167=CARTESIAN_POINT('',(-1.869021613849E0,-3.539321993199E0,
1.924765641045E-4));
#2168=CARTESIAN_POINT('',(-1.607478622725E0,-3.690909597103E0,
1.067966997677E-2));
#2169=CARTESIAN_POINT('',(-1.214858048747E0,-3.917353767742E0,
5.448991332457E-2));
#2170=CARTESIAN_POINT('',(-8.203306753690E-1,-4.145197415350E0,
1.265551530992E-1));
#2171=CARTESIAN_POINT('',(-4.200003357294E-1,-4.376311018601E0,
2.254194965045E-1));
#2172=CARTESIAN_POINT('',(-1.415287663110E-1,-4.537090482189E0,
3.106666847403E-1));
#2173=CARTESIAN_POINT('',(0.E0,-4.618802153517E0,3.578429401773E-1));
#2175=CARTESIAN_POINT('',(-4.E0,-2.309401076759E0,3.578429401774E-1));
#2176=CARTESIAN_POINT('',(-3.858495500815E0,-2.391098737454E0,
3.106747737824E-1));
#2177=CARTESIAN_POINT('',(-3.580045490393E0,-2.551858097904E0,
2.254312656997E-1));
#2178=CARTESIAN_POINT('',(-3.179571966685E0,-2.783088820726E0,
1.265293779734E-1));
#2179=CARTESIAN_POINT('',(-2.784990982333E0,-3.010837095873E0,
5.447488187618E-2));
#2180=CARTESIAN_POINT('',(-2.392611409670E0,-3.237612971211E0,
1.067547334809E-2));
#2181=CARTESIAN_POINT('',(-2.130604919892E0,-3.388296801040E0,
1.924700594371E-4));
#2182=CARTESIAN_POINT('',(-1.999826784241E0,-3.463801592862E0,
1.609053616557E-4));
#2184=DIRECTION('',(0.E0,0.E0,1.E0));
#2185=VECTOR('',#2184,2.484314119645E0);
#2186=CARTESIAN_POINT('',(-4.E0,-2.309401076759E0,3.578429401774E-1));
#2187=LINE('',#2186,#2185);
#2188=CARTESIAN_POINT('',(-1.999500000406E0,3.463235589500E0,0.E0));
#2189=CARTESIAN_POINT('',(-3.999E0,1.183497744250E-12,0.E0));
#2190=VERTEX_POINT('',#2188);
#2191=VERTEX_POINT('',#2189);
#2192=CARTESIAN_POINT('',(-1.999500000460E0,-3.463235589468E0,0.E0));
#2193=VERTEX_POINT('',#2192);
#2194=CARTESIAN_POINT('',(1.999500002384E0,-3.463235588358E0,0.E0));
#2195=CARTESIAN_POINT('',(3.999E0,6.166178678768E-13,0.E0));
#2196=VERTEX_POINT('',#2194);
#2197=VERTEX_POINT('',#2195);
#2198=CARTESIAN_POINT('',(1.999500002543E0,3.463235588266E0,0.E0));
#2199=VERTEX_POINT('',#2198);
#2200=VERTEX_POINT('',#2130);
#2201=VERTEX_POINT('',#2128);
#2202=VERTEX_POINT('',#1788);
#2203=VERTEX_POINT('',#2173);
#2204=VERTEX_POINT('',#2008);
#2205=VERTEX_POINT('',#2048);
#2206=CARTESIAN_POINT('',(0.E0,4.618802153517E0,2.842157059823E0));
#2207=VERTEX_POINT('',#2206);
#2208=CARTESIAN_POINT('',(-4.E0,2.309401076759E0,2.842157059823E0));
#2209=VERTEX_POINT('',#2208);
#2210=CARTESIAN_POINT('',(-4.E0,-2.309401076759E0,2.842157059823E0));
#2211=VERTEX_POINT('',#2210);
#2212=CARTESIAN_POINT('',(0.E0,-4.618802153517E0,2.842157059823E0));
#2213=VERTEX_POINT('',#2212);
#2214=CARTESIAN_POINT('',(4.E0,-2.309401076759E0,2.842157059823E0));
#2215=VERTEX_POINT('',#2214);
#2216=CARTESIAN_POINT('',(4.E0,2.309401076759E0,2.842157059823E0));
#2217=VERTEX_POINT('',#2216);
#2218=CARTESIAN_POINT('',(0.E0,2.E0,2.911324865405E0));
#2219=CARTESIAN_POINT('',(-2.E0,0.E0,2.911324865405E0));
#2220=VERTEX_POINT('',#2218);
#2221=VERTEX_POINT('',#2219);
#2222=CARTESIAN_POINT('',(2.E0,0.E0,2.911324865405E0));
#2223=VERTEX_POINT('',#2222);
#2224=CARTESIAN_POINT('',(0.E0,-2.E0,2.911324865405E0));
#2225=VERTEX_POINT('',#2224);
#2226=CARTESIAN_POINT('',(2.E0,0.E0,2.886751345948E-1));
#2227=VERTEX_POINT('',#2226);
#2228=CARTESIAN_POINT('',(-2.E0,0.E0,2.886751345948E-1));
#2229=VERTEX_POINT('',#2228);
#2230=CARTESIAN_POINT('',(0.E0,2.5E0,0.E0));
#2231=CARTESIAN_POINT('',(0.E0,-2.5E0,0.E0));
#2232=VERTEX_POINT('',#2230);
#2233=VERTEX_POINT('',#2231);
#2234=CARTESIAN_POINT('',(0.E0,2.E0,2.886751345948E-1));
#2235=VERTEX_POINT('',#2234);
#2236=CARTESIAN_POINT('',(0.E0,-2.E0,2.886751345948E-1));
#2237=VERTEX_POINT('',#2236);
#2238=CARTESIAN_POINT('',(0.E0,-2.E0,3.2E0));
#2239=CARTESIAN_POINT('',(0.E0,2.E0,3.2E0));
#2240=VERTEX_POINT('',#2238);
#2241=VERTEX_POINT('',#2239);
#2242=CARTESIAN_POINT('',(0.E0,-2.E0,5.E0));
#2243=CARTESIAN_POINT('',(0.E0,2.E0,5.E0));
#2244=VERTEX_POINT('',#2242);
#2245=VERTEX_POINT('',#2243);
#2246=CARTESIAN_POINT('',(0.E0,-3.999E0,3.2E0));
#2247=CARTESIAN_POINT('',(1.999500126441E0,-3.463235516733E0,3.2E0));
#2248=VERTEX_POINT('',#2246);
#2249=VERTEX_POINT('',#2247);
#2250=CARTESIAN_POINT('',(3.999E0,-6.858957846134E-13,3.2E0));
#2251=VERTEX_POINT('',#2250);
#2252=CARTESIAN_POINT('',(1.999500131599E0,3.463235513755E0,3.2E0));
#2253=VERTEX_POINT('',#2252);
#2254=CARTESIAN_POINT('',(0.E0,3.999E0,3.2E0));
#2255=VERTEX_POINT('',#2254);
#2256=CARTESIAN_POINT('',(-1.999500126464E0,3.463235516720E0,3.2E0));
#2257=VERTEX_POINT('',#2256);
#2258=CARTESIAN_POINT('',(-3.999E0,1.183497744250E-12,3.2E0));
#2259=VERTEX_POINT('',#2258);
#2260=CARTESIAN_POINT('',(-1.999500136340E0,-3.463235511018E0,3.2E0));
#2261=VERTEX_POINT('',#2260);
#2262=CARTESIAN_POINT('',(0.E0,2.5E0,3.2E0));
#2263=CARTESIAN_POINT('',(0.E0,-2.5E0,3.2E0));
#2264=VERTEX_POINT('',#2262);
#2265=VERTEX_POINT('',#2263);
#2266=CARTESIAN_POINT('',(0.E0,-3.498999993922E0,5.E0));
#2267=CARTESIAN_POINT('',(0.E0,3.498999993922E0,5.E0));
#2268=VERTEX_POINT('',#2266);
#2269=VERTEX_POINT('',#2267);
#2270=CARTESIAN_POINT('',(0.E0,-3.999E0,4.5E0));
#2271=CARTESIAN_POINT('',(0.E0,3.999E0,4.5E0));
#2272=VERTEX_POINT('',#2270);
#2273=VERTEX_POINT('',#2271);
#2274=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2275=DIRECTION('',(0.E0,0.E0,1.E0));
#2276=DIRECTION('',(1.E0,0.E0,0.E0));
#2277=AXIS2_PLACEMENT_3D('',#2274,#2275,#2276);
#2278=PLANE('',#2277);
#2280=ORIENTED_EDGE('',*,*,#2279,.F.);
#2282=ORIENTED_EDGE('',*,*,#2281,.T.);
#2284=ORIENTED_EDGE('',*,*,#2283,.T.);
#2286=ORIENTED_EDGE('',*,*,#2285,.F.);
#2288=ORIENTED_EDGE('',*,*,#2287,.T.);
#2290=ORIENTED_EDGE('',*,*,#2289,.T.);
#2291=EDGE_LOOP('',(#2280,#2282,#2284,#2286,#2288,#2290));
#2292=FACE_OUTER_BOUND('',#2291,.F.);
#2294=ORIENTED_EDGE('',*,*,#2293,.F.);
#2296=ORIENTED_EDGE('',*,*,#2295,.F.);
#2297=EDGE_LOOP('',(#2294,#2296));
#2298=FACE_BOUND('',#2297,.F.);
#2299=ADVANCED_FACE('',(#2292,#2298),#2278,.F.);
#2300=CARTESIAN_POINT('',(0.E0,0.E0,1.789032274239E-1));
#2301=DIRECTION('',(0.E0,0.E0,1.E0));
#2302=DIRECTION('',(0.E0,1.E0,0.E0));
#2303=AXIS2_PLACEMENT_3D('',#2300,#2301,#2302);
#2304=CONICAL_SURFACE('',#2303,4.308869479536E0,6.E1);
#2305=ORIENTED_EDGE('',*,*,#2283,.F.);
#2307=ORIENTED_EDGE('',*,*,#2306,.T.);
#2309=ORIENTED_EDGE('',*,*,#2308,.T.);
#2310=EDGE_LOOP('',(#2305,#2307,#2309));
#2311=FACE_OUTER_BOUND('',#2310,.F.);
#2312=ADVANCED_FACE('',(#2311),#2304,.T.);
#2313=CARTESIAN_POINT('',(0.E0,0.E0,1.789032274239E-1));
#2314=DIRECTION('',(0.E0,0.E0,1.E0));
#2315=DIRECTION('',(0.E0,1.E0,0.E0));
#2316=AXIS2_PLACEMENT_3D('',#2313,#2314,#2315);
#2317=CONICAL_SURFACE('',#2316,4.308869479536E0,6.E1);
#2318=ORIENTED_EDGE('',*,*,#2281,.F.);
#2320=ORIENTED_EDGE('',*,*,#2319,.T.);
#2322=ORIENTED_EDGE('',*,*,#2321,.T.);
#2323=EDGE_LOOP('',(#2318,#2320,#2322));
#2324=FACE_OUTER_BOUND('',#2323,.F.);
#2325=ADVANCED_FACE('',(#2324),#2317,.T.);
#2326=CARTESIAN_POINT('',(0.E0,0.E0,1.789032274239E-1));
#2327=DIRECTION('',(0.E0,0.E0,1.E0));
#2328=DIRECTION('',(0.E0,1.E0,0.E0));
#2329=AXIS2_PLACEMENT_3D('',#2326,#2327,#2328);
#2330=CONICAL_SURFACE('',#2329,4.308869479536E0,6.E1);
#2331=ORIENTED_EDGE('',*,*,#2287,.F.);
#2333=ORIENTED_EDGE('',*,*,#2332,.T.);
#2335=ORIENTED_EDGE('',*,*,#2334,.T.);
#2336=EDGE_LOOP('',(#2331,#2333,#2335));
#2337=FACE_OUTER_BOUND('',#2336,.F.);
#2338=ADVANCED_FACE('',(#2337),#2330,.T.);
#2339=CARTESIAN_POINT('',(0.E0,0.E0,1.789032274239E-1));
#2340=DIRECTION('',(0.E0,0.E0,1.E0));
#2341=DIRECTION('',(0.E0,1.E0,0.E0));
#2342=AXIS2_PLACEMENT_3D('',#2339,#2340,#2341);
#2343=CONICAL_SURFACE('',#2342,4.308869479536E0,6.E1);
#2344=ORIENTED_EDGE('',*,*,#2289,.F.);
#2346=ORIENTED_EDGE('',*,*,#2345,.T.);
#2348=ORIENTED_EDGE('',*,*,#2347,.T.);
#2349=EDGE_LOOP('',(#2344,#2346,#2348));
#2350=FACE_OUTER_BOUND('',#2349,.F.);
#2351=ADVANCED_FACE('',(#2350),#2343,.T.);
#2352=CARTESIAN_POINT('',(0.E0,0.E0,1.789032274239E-1));
#2353=DIRECTION('',(0.E0,0.E0,1.E0));
#2354=DIRECTION('',(0.E0,1.E0,0.E0));
#2355=AXIS2_PLACEMENT_3D('',#2352,#2353,#2354);
#2356=CONICAL_SURFACE('',#2355,4.308869479536E0,6.E1);
#2358=ORIENTED_EDGE('',*,*,#2357,.T.);
#2360=ORIENTED_EDGE('',*,*,#2359,.T.);
#2361=ORIENTED_EDGE('',*,*,#2279,.T.);
#2362=EDGE_LOOP('',(#2358,#2360,#2361));
#2363=FACE_OUTER_BOUND('',#2362,.F.);
#2364=ADVANCED_FACE('',(#2363),#2356,.T.);
#2365=CARTESIAN_POINT('',(-4.E0,2.309401076759E0,0.E0));
#2366=DIRECTION('',(-1.E0,0.E0,0.E0));
#2367=DIRECTION('',(0.E0,-1.E0,0.E0));
#2368=AXIS2_PLACEMENT_3D('',#2365,#2366,#2367);
#2369=PLANE('',#2368);
#2371=ORIENTED_EDGE('',*,*,#2370,.T.);
#2373=ORIENTED_EDGE('',*,*,#2372,.T.);
#2375=ORIENTED_EDGE('',*,*,#2374,.F.);
#2376=ORIENTED_EDGE('',*,*,#2306,.F.);
#2377=ORIENTED_EDGE('',*,*,#2321,.F.);
#2379=ORIENTED_EDGE('',*,*,#2378,.T.);
#2380=EDGE_LOOP('',(#2371,#2373,#2375,#2376,#2377,#2379));
#2381=FACE_OUTER_BOUND('',#2380,.F.);
#2382=ADVANCED_FACE('',(#2381),#2369,.T.);
#2383=CARTESIAN_POINT('',(0.E0,0.E0,3.021082488785E0));
#2384=DIRECTION('',(0.E0,0.E0,-1.E0));
#2385=DIRECTION('',(0.E0,-1.E0,0.E0));
#2386=AXIS2_PLACEMENT_3D('',#2383,#2384,#2385);
#2387=CONICAL_SURFACE('',#2386,4.308894219788E0,6.E1);
#2389=ORIENTED_EDGE('',*,*,#2388,.T.);
#2391=ORIENTED_EDGE('',*,*,#2390,.F.);
#2393=ORIENTED_EDGE('',*,*,#2392,.F.);
#2394=EDGE_LOOP('',(#2389,#2391,#2393));
#2395=FACE_OUTER_BOUND('',#2394,.F.);
#2396=ADVANCED_FACE('',(#2395),#2387,.T.);
#2397=CARTESIAN_POINT('',(0.E0,0.E0,3.021082488785E0));
#2398=DIRECTION('',(0.E0,0.E0,-1.E0));
#2399=DIRECTION('',(0.E0,-1.E0,0.E0));
#2400=AXIS2_PLACEMENT_3D('',#2397,#2398,#2399);
#2401=CONICAL_SURFACE('',#2400,4.308894219788E0,6.E1);
#2403=ORIENTED_EDGE('',*,*,#2402,.T.);
#2405=ORIENTED_EDGE('',*,*,#2404,.F.);
#2407=ORIENTED_EDGE('',*,*,#2406,.F.);
#2408=EDGE_LOOP('',(#2403,#2405,#2407));
#2409=FACE_OUTER_BOUND('',#2408,.F.);
#2410=ADVANCED_FACE('',(#2409),#2401,.T.);
#2411=CARTESIAN_POINT('',(0.E0,0.E0,3.021082488785E0));
#2412=DIRECTION('',(0.E0,0.E0,-1.E0));
#2413=DIRECTION('',(0.E0,-1.E0,0.E0));
#2414=AXIS2_PLACEMENT_3D('',#2411,#2412,#2413);
#2415=CONICAL_SURFACE('',#2414,4.308894219788E0,6.E1);
#2417=ORIENTED_EDGE('',*,*,#2416,.T.);
#2419=ORIENTED_EDGE('',*,*,#2418,.T.);
#2421=ORIENTED_EDGE('',*,*,#2420,.F.);
#2423=ORIENTED_EDGE('',*,*,#2422,.F.);
#2424=EDGE_LOOP('',(#2417,#2419,#2421,#2423));
#2425=FACE_OUTER_BOUND('',#2424,.F.);
#2426=ADVANCED_FACE('',(#2425),#2415,.T.);
#2427=CARTESIAN_POINT('',(0.E0,0.E0,3.021082488785E0));
#2428=DIRECTION('',(0.E0,0.E0,-1.E0));
#2429=DIRECTION('',(0.E0,-1.E0,0.E0));
#2430=AXIS2_PLACEMENT_3D('',#2427,#2428,#2429);
#2431=CONICAL_SURFACE('',#2430,4.308894219788E0,6.E1);
#2433=ORIENTED_EDGE('',*,*,#2432,.T.);
#2434=ORIENTED_EDGE('',*,*,#2370,.F.);
#2436=ORIENTED_EDGE('',*,*,#2435,.F.);
#2437=EDGE_LOOP('',(#2433,#2434,#2436));
#2438=FACE_OUTER_BOUND('',#2437,.F.);
#2439=ADVANCED_FACE('',(#2438),#2431,.T.);
#2440=CARTESIAN_POINT('',(0.E0,0.E0,3.021082488785E0));
#2441=DIRECTION('',(0.E0,0.E0,-1.E0));
#2442=DIRECTION('',(0.E0,-1.E0,0.E0));
#2443=AXIS2_PLACEMENT_3D('',#2440,#2441,#2442);
#2444=CONICAL_SURFACE('',#2443,4.308894219788E0,6.E1);
#2446=ORIENTED_EDGE('',*,*,#2445,.T.);
#2448=ORIENTED_EDGE('',*,*,#2447,.F.);
#2449=ORIENTED_EDGE('',*,*,#2372,.F.);
#2450=EDGE_LOOP('',(#2446,#2448,#2449));
#2451=FACE_OUTER_BOUND('',#2450,.F.);
#2452=ADVANCED_FACE('',(#2451),#2444,.T.);
#2453=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#2454=DIRECTION('',(0.E0,0.E0,1.E0));
#2455=DIRECTION('',(0.E0,-1.E0,0.E0));
#2456=AXIS2_PLACEMENT_3D('',#2453,#2454,#2455);
#2457=CYLINDRICAL_SURFACE('',#2456,3.999E0);
#2459=ORIENTED_EDGE('',*,*,#2458,.T.);
#2461=ORIENTED_EDGE('',*,*,#2460,.F.);
#2462=ORIENTED_EDGE('',*,*,#2416,.F.);
#2463=ORIENTED_EDGE('',*,*,#2402,.F.);
#2464=ORIENTED_EDGE('',*,*,#2388,.F.);
#2466=ORIENTED_EDGE('',*,*,#2465,.F.);
#2468=ORIENTED_EDGE('',*,*,#2467,.T.);
#2469=EDGE_LOOP('',(#2459,#2461,#2462,#2463,#2464,#2466,#2468));
#2470=FACE_OUTER_BOUND('',#2469,.F.);
#2471=ADVANCED_FACE('',(#2470),#2457,.T.);
#2472=CARTESIAN_POINT('',(0.E0,0.E0,4.5E0));
#2473=DIRECTION('',(0.E0,0.E0,1.E0));
#2474=DIRECTION('',(-5.757901660640E-3,-9.999834231468E-1,0.E0));
#2475=AXIS2_PLACEMENT_3D('',#2472,#2473,#2474);
#2476=TOROIDAL_SURFACE('',#2475,3.499E0,5.E-1);
#2478=ORIENTED_EDGE('',*,*,#2477,.T.);
#2480=ORIENTED_EDGE('',*,*,#2479,.T.);
#2481=ORIENTED_EDGE('',*,*,#2458,.F.);
#2483=ORIENTED_EDGE('',*,*,#2482,.F.);
#2484=EDGE_LOOP('',(#2478,#2480,#2481,#2483));
#2485=FACE_OUTER_BOUND('',#2484,.F.);
#2486=ADVANCED_FACE('',(#2485),#2476,.T.);
#2487=CARTESIAN_POINT('',(0.E0,0.E0,5.E0));
#2488=DIRECTION('',(0.E0,0.E0,1.E0));
#2489=DIRECTION('',(0.E0,-1.E0,0.E0));
#2490=AXIS2_PLACEMENT_3D('',#2487,#2488,#2489);
#2491=PLANE('',#2490);
#2492=ORIENTED_EDGE('',*,*,#2477,.F.);
#2494=ORIENTED_EDGE('',*,*,#2493,.F.);
#2495=EDGE_LOOP('',(#2492,#2494));
#2496=FACE_OUTER_BOUND('',#2495,.F.);
#2498=ORIENTED_EDGE('',*,*,#2497,.F.);
#2500=ORIENTED_EDGE('',*,*,#2499,.F.);
#2501=EDGE_LOOP('',(#2498,#2500));
#2502=FACE_BOUND('',#2501,.F.);
#2503=ADVANCED_FACE('',(#2496,#2502),#2491,.T.);
#2504=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#2505=DIRECTION('',(0.E0,0.E0,1.E0));
#2506=DIRECTION('',(0.E0,-1.E0,0.E0));
#2507=AXIS2_PLACEMENT_3D('',#2504,#2505,#2506);
#2508=CYLINDRICAL_SURFACE('',#2507,2.E0);
#2510=ORIENTED_EDGE('',*,*,#2509,.F.);
#2512=ORIENTED_EDGE('',*,*,#2511,.T.);
#2513=ORIENTED_EDGE('',*,*,#2497,.T.);
#2515=ORIENTED_EDGE('',*,*,#2514,.F.);
#2516=EDGE_LOOP('',(#2510,#2512,#2513,#2515));
#2517=FACE_OUTER_BOUND('',#2516,.F.);
#2518=ADVANCED_FACE('',(#2517),#2508,.F.);
#2519=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#2520=DIRECTION('',(0.E0,0.E0,1.E0));
#2521=DIRECTION('',(0.E0,-1.E0,0.E0));
#2522=AXIS2_PLACEMENT_3D('',#2519,#2520,#2521);
#2523=PLANE('',#2522);
#2525=ORIENTED_EDGE('',*,*,#2524,.T.);
#2527=ORIENTED_EDGE('',*,*,#2526,.T.);
#2528=EDGE_LOOP('',(#2525,#2527));
#2529=FACE_OUTER_BOUND('',#2528,.F.);
#2530=ORIENTED_EDGE('',*,*,#2509,.T.);
#2532=ORIENTED_EDGE('',*,*,#2531,.T.);
#2533=EDGE_LOOP('',(#2530,#2532));
#2534=FACE_BOUND('',#2533,.F.);
#2535=ADVANCED_FACE('',(#2529,#2534),#2523,.F.);
#2536=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#2537=DIRECTION('',(0.E0,0.E0,1.E0));
#2538=DIRECTION('',(0.E0,-1.E0,0.E0));
#2539=AXIS2_PLACEMENT_3D('',#2536,#2537,#2538);
#2540=CYLINDRICAL_SURFACE('',#2539,2.E0);
#2541=ORIENTED_EDGE('',*,*,#2531,.F.);
#2542=ORIENTED_EDGE('',*,*,#2514,.T.);
#2543=ORIENTED_EDGE('',*,*,#2499,.T.);
#2544=ORIENTED_EDGE('',*,*,#2511,.F.);
#2545=EDGE_LOOP('',(#2541,#2542,#2543,#2544));
#2546=FACE_OUTER_BOUND('',#2545,.F.);
#2547=ADVANCED_FACE('',(#2546),#2540,.F.);
#2548=CARTESIAN_POINT('',(0.E0,0.E0,3.055662432703E0));
#2549=DIRECTION('',(0.E0,0.E0,1.E0));
#2550=DIRECTION('',(0.E0,1.E0,0.E0));
#2551=AXIS2_PLACEMENT_3D('',#2548,#2549,#2550);
#2552=CONICAL_SURFACE('',#2551,2.25E0,6.E1);
#2553=ORIENTED_EDGE('',*,*,#2524,.F.);
#2555=ORIENTED_EDGE('',*,*,#2554,.F.);
#2557=ORIENTED_EDGE('',*,*,#2556,.T.);
#2559=ORIENTED_EDGE('',*,*,#2558,.T.);
#2561=ORIENTED_EDGE('',*,*,#2560,.T.);
#2562=EDGE_LOOP('',(#2553,#2555,#2557,#2559,#2561));
#2563=FACE_OUTER_BOUND('',#2562,.F.);
#2564=ADVANCED_FACE('',(#2563),#2552,.F.);
#2565=CARTESIAN_POINT('',(0.E0,0.E0,3.055662432703E0));
#2566=DIRECTION('',(0.E0,0.E0,1.E0));
#2567=DIRECTION('',(0.E0,1.E0,0.E0));
#2568=AXIS2_PLACEMENT_3D('',#2565,#2566,#2567);
#2569=CONICAL_SURFACE('',#2568,2.25E0,6.E1);
#2570=ORIENTED_EDGE('',*,*,#2526,.F.);
#2571=ORIENTED_EDGE('',*,*,#2560,.F.);
#2573=ORIENTED_EDGE('',*,*,#2572,.T.);
#2575=ORIENTED_EDGE('',*,*,#2574,.T.);
#2576=ORIENTED_EDGE('',*,*,#2554,.T.);
#2577=EDGE_LOOP('',(#2570,#2571,#2573,#2575,#2576));
#2578=FACE_OUTER_BOUND('',#2577,.F.);
#2579=ADVANCED_FACE('',(#2578),#2569,.F.);
#2580=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2581=DIRECTION('',(0.E0,0.E0,1.E0));
#2582=DIRECTION('',(1.E0,0.E0,0.E0));
#2583=AXIS2_PLACEMENT_3D('',#2580,#2581,#2582);
#2584=CYLINDRICAL_SURFACE('',#2583,2.E0);
#2585=ORIENTED_EDGE('',*,*,#2558,.F.);
#2587=ORIENTED_EDGE('',*,*,#2586,.F.);
#2589=ORIENTED_EDGE('',*,*,#2588,.T.);
#2591=ORIENTED_EDGE('',*,*,#2590,.T.);
#2593=ORIENTED_EDGE('',*,*,#2592,.T.);
#2594=ORIENTED_EDGE('',*,*,#2572,.F.);
#2595=EDGE_LOOP('',(#2585,#2587,#2589,#2591,#2593,#2594));
#2596=FACE_OUTER_BOUND('',#2595,.F.);
#2597=ADVANCED_FACE('',(#2596),#2584,.F.);
#2598=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2599=DIRECTION('',(0.E0,0.E0,1.E0));
#2600=DIRECTION('',(1.E0,0.E0,0.E0));
#2601=AXIS2_PLACEMENT_3D('',#2598,#2599,#2600);
#2602=CYLINDRICAL_SURFACE('',#2601,2.E0);
#2603=ORIENTED_EDGE('',*,*,#2556,.F.);
#2604=ORIENTED_EDGE('',*,*,#2574,.F.);
#2605=ORIENTED_EDGE('',*,*,#2592,.F.);
#2607=ORIENTED_EDGE('',*,*,#2606,.T.);
#2609=ORIENTED_EDGE('',*,*,#2608,.T.);
#2610=ORIENTED_EDGE('',*,*,#2586,.T.);
#2611=EDGE_LOOP('',(#2603,#2604,#2605,#2607,#2609,#2610));
#2612=FACE_OUTER_BOUND('',#2611,.F.);
#2613=ADVANCED_FACE('',(#2612),#2602,.F.);
#2614=CARTESIAN_POINT('',(0.E0,0.E0,1.443375672974E-1));
#2615=DIRECTION('',(0.E0,0.E0,-1.E0));
#2616=DIRECTION('',(0.E0,-1.E0,0.E0));
#2617=AXIS2_PLACEMENT_3D('',#2614,#2615,#2616);
#2618=CONICAL_SURFACE('',#2617,2.25E0,6.E1);
#2619=ORIENTED_EDGE('',*,*,#2295,.T.);
#2621=ORIENTED_EDGE('',*,*,#2620,.T.);
#2622=ORIENTED_EDGE('',*,*,#2606,.F.);
#2623=ORIENTED_EDGE('',*,*,#2590,.F.);
#2625=ORIENTED_EDGE('',*,*,#2624,.F.);
#2626=EDGE_LOOP('',(#2619,#2621,#2622,#2623,#2625));
#2627=FACE_OUTER_BOUND('',#2626,.F.);
#2628=ADVANCED_FACE('',(#2627),#2618,.F.);
#2629=CARTESIAN_POINT('',(0.E0,0.E0,1.443375672974E-1));
#2630=DIRECTION('',(0.E0,0.E0,-1.E0));
#2631=DIRECTION('',(0.E0,-1.E0,0.E0));
#2632=AXIS2_PLACEMENT_3D('',#2629,#2630,#2631);
#2633=CONICAL_SURFACE('',#2632,2.25E0,6.E1);
#2634=ORIENTED_EDGE('',*,*,#2293,.T.);
#2635=ORIENTED_EDGE('',*,*,#2624,.T.);
#2636=ORIENTED_EDGE('',*,*,#2588,.F.);
#2637=ORIENTED_EDGE('',*,*,#2608,.F.);
#2638=ORIENTED_EDGE('',*,*,#2620,.F.);
#2639=EDGE_LOOP('',(#2634,#2635,#2636,#2637,#2638));
#2640=FACE_OUTER_BOUND('',#2639,.F.);
#2641=ADVANCED_FACE('',(#2640),#2633,.F.);
#2642=CARTESIAN_POINT('',(0.E0,0.E0,4.5E0));
#2643=DIRECTION('',(0.E0,0.E0,1.E0));
#2644=DIRECTION('',(5.757901660640E-3,9.999834231468E-1,0.E0));
#2645=AXIS2_PLACEMENT_3D('',#2642,#2643,#2644);
#2646=TOROIDAL_SURFACE('',#2645,3.499E0,5.E-1);
#2647=ORIENTED_EDGE('',*,*,#2493,.T.);
#2648=ORIENTED_EDGE('',*,*,#2482,.T.);
#2650=ORIENTED_EDGE('',*,*,#2649,.F.);
#2651=ORIENTED_EDGE('',*,*,#2479,.F.);
#2652=EDGE_LOOP('',(#2647,#2648,#2650,#2651));
#2653=FACE_OUTER_BOUND('',#2652,.F.);
#2654=ADVANCED_FACE('',(#2653),#2646,.T.);
#2655=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#2656=DIRECTION('',(0.E0,0.E0,1.E0));
#2657=DIRECTION('',(0.E0,-1.E0,0.E0));
#2658=AXIS2_PLACEMENT_3D('',#2655,#2656,#2657);
#2659=CYLINDRICAL_SURFACE('',#2658,3.999E0);
#2660=ORIENTED_EDGE('',*,*,#2649,.T.);
#2661=ORIENTED_EDGE('',*,*,#2467,.F.);
#2663=ORIENTED_EDGE('',*,*,#2662,.F.);
#2664=ORIENTED_EDGE('',*,*,#2445,.F.);
#2665=ORIENTED_EDGE('',*,*,#2432,.F.);
#2666=ORIENTED_EDGE('',*,*,#2418,.F.);
#2667=ORIENTED_EDGE('',*,*,#2460,.T.);
#2668=EDGE_LOOP('',(#2660,#2661,#2663,#2664,#2665,#2666,#2667));
#2669=FACE_OUTER_BOUND('',#2668,.F.);
#2670=ADVANCED_FACE('',(#2669),#2659,.T.);
#2671=CARTESIAN_POINT('',(0.E0,0.E0,3.021082488785E0));
#2672=DIRECTION('',(0.E0,0.E0,-1.E0));
#2673=DIRECTION('',(0.E0,-1.E0,0.E0));
#2674=AXIS2_PLACEMENT_3D('',#2671,#2672,#2673);
#2675=CONICAL_SURFACE('',#2674,4.308894219788E0,6.E1);
#2676=ORIENTED_EDGE('',*,*,#2465,.T.);
#2678=ORIENTED_EDGE('',*,*,#2677,.F.);
#2680=ORIENTED_EDGE('',*,*,#2679,.F.);
#2681=ORIENTED_EDGE('',*,*,#2662,.T.);
#2682=EDGE_LOOP('',(#2676,#2678,#2680,#2681));
#2683=FACE_OUTER_BOUND('',#2682,.F.);
#2684=ADVANCED_FACE('',(#2683),#2675,.T.);
#2685=CARTESIAN_POINT('',(0.E0,-4.618802153517E0,0.E0));
#2686=DIRECTION('',(5.E-1,-8.660254037844E-1,0.E0));
#2687=DIRECTION('',(8.660254037844E-1,5.E-1,0.E0));
#2688=AXIS2_PLACEMENT_3D('',#2685,#2686,#2687);
#2689=PLANE('',#2688);
#2690=ORIENTED_EDGE('',*,*,#2677,.T.);
#2691=ORIENTED_EDGE('',*,*,#2392,.T.);
#2693=ORIENTED_EDGE('',*,*,#2692,.F.);
#2694=ORIENTED_EDGE('',*,*,#2332,.F.);
#2696=ORIENTED_EDGE('',*,*,#2695,.F.);
#2698=ORIENTED_EDGE('',*,*,#2697,.T.);
#2699=EDGE_LOOP('',(#2690,#2691,#2693,#2694,#2696,#2698));
#2700=FACE_OUTER_BOUND('',#2699,.F.);
#2701=ADVANCED_FACE('',(#2700),#2689,.T.);
#2702=CARTESIAN_POINT('',(4.E0,-2.309401076759E0,0.E0));
#2703=DIRECTION('',(1.E0,0.E0,0.E0));
#2704=DIRECTION('',(0.E0,1.E0,0.E0));
#2705=AXIS2_PLACEMENT_3D('',#2702,#2703,#2704);
#2706=PLANE('',#2705);
#2707=ORIENTED_EDGE('',*,*,#2390,.T.);
#2708=ORIENTED_EDGE('',*,*,#2406,.T.);
#2710=ORIENTED_EDGE('',*,*,#2709,.F.);
#2711=ORIENTED_EDGE('',*,*,#2345,.F.);
#2712=ORIENTED_EDGE('',*,*,#2334,.F.);
#2713=ORIENTED_EDGE('',*,*,#2692,.T.);
#2714=EDGE_LOOP('',(#2707,#2708,#2710,#2711,#2712,#2713));
#2715=FACE_OUTER_BOUND('',#2714,.F.);
#2716=ADVANCED_FACE('',(#2715),#2706,.T.);
#2717=CARTESIAN_POINT('',(4.E0,2.309401076759E0,0.E0));
#2718=DIRECTION('',(5.E-1,8.660254037844E-1,0.E0));
#2719=DIRECTION('',(-8.660254037844E-1,5.E-1,0.E0));
#2720=AXIS2_PLACEMENT_3D('',#2717,#2718,#2719);
#2721=PLANE('',#2720);
#2722=ORIENTED_EDGE('',*,*,#2404,.T.);
#2723=ORIENTED_EDGE('',*,*,#2422,.T.);
#2725=ORIENTED_EDGE('',*,*,#2724,.F.);
#2726=ORIENTED_EDGE('',*,*,#2357,.F.);
#2727=ORIENTED_EDGE('',*,*,#2347,.F.);
#2728=ORIENTED_EDGE('',*,*,#2709,.T.);
#2729=EDGE_LOOP('',(#2722,#2723,#2725,#2726,#2727,#2728));
#2730=FACE_OUTER_BOUND('',#2729,.F.);
#2731=ADVANCED_FACE('',(#2730),#2721,.T.);
#2732=CARTESIAN_POINT('',(0.E0,4.618802153517E0,0.E0));
#2733=DIRECTION('',(-5.E-1,8.660254037844E-1,0.E0));
#2734=DIRECTION('',(-8.660254037844E-1,-5.E-1,0.E0));
#2735=AXIS2_PLACEMENT_3D('',#2732,#2733,#2734);
#2736=PLANE('',#2735);
#2737=ORIENTED_EDGE('',*,*,#2420,.T.);
#2738=ORIENTED_EDGE('',*,*,#2435,.T.);
#2739=ORIENTED_EDGE('',*,*,#2378,.F.);
#2740=ORIENTED_EDGE('',*,*,#2319,.F.);
#2741=ORIENTED_EDGE('',*,*,#2359,.F.);
#2742=ORIENTED_EDGE('',*,*,#2724,.T.);
#2743=EDGE_LOOP('',(#2737,#2738,#2739,#2740,#2741,#2742));
#2744=FACE_OUTER_BOUND('',#2743,.F.);
#2745=ADVANCED_FACE('',(#2744),#2736,.T.);
#2746=CARTESIAN_POINT('',(0.E0,0.E0,1.789032274239E-1));
#2747=DIRECTION('',(0.E0,0.E0,1.E0));
#2748=DIRECTION('',(0.E0,1.E0,0.E0));
#2749=AXIS2_PLACEMENT_3D('',#2746,#2747,#2748);
#2750=CONICAL_SURFACE('',#2749,4.308869479536E0,6.E1);
#2752=ORIENTED_EDGE('',*,*,#2751,.T.);
#2753=ORIENTED_EDGE('',*,*,#2695,.T.);
#2754=ORIENTED_EDGE('',*,*,#2285,.T.);
#2755=EDGE_LOOP('',(#2752,#2753,#2754));
#2756=FACE_OUTER_BOUND('',#2755,.F.);
#2757=ADVANCED_FACE('',(#2756),#2750,.T.);
#2758=CARTESIAN_POINT('',(-4.E0,-2.309401076759E0,0.E0));
#2759=DIRECTION('',(-5.E-1,-8.660254037844E-1,0.E0));
#2760=DIRECTION('',(8.660254037844E-1,-5.E-1,0.E0));
#2761=AXIS2_PLACEMENT_3D('',#2758,#2759,#2760);
#2762=PLANE('',#2761);
#2763=ORIENTED_EDGE('',*,*,#2447,.T.);
#2764=ORIENTED_EDGE('',*,*,#2679,.T.);
#2765=ORIENTED_EDGE('',*,*,#2697,.F.);
#2766=ORIENTED_EDGE('',*,*,#2751,.F.);
#2767=ORIENTED_EDGE('',*,*,#2308,.F.);
#2768=ORIENTED_EDGE('',*,*,#2374,.T.);
#2769=EDGE_LOOP('',(#2763,#2764,#2765,#2766,#2767,#2768));
#2770=FACE_OUTER_BOUND('',#2769,.F.);
#2771=ADVANCED_FACE('',(#2770),#2762,.T.);
#2772=CLOSED_SHELL('',(#2299,#2312,#2325,#2338,#2351,#2364,#2382,#2396,#2410,
#2426,#2439,#2452,#2471,#2486,#2503,#2518,#2535,#2547,#2564,#2579,#2597,#2613,
#2628,#2641,#2654,#2670,#2684,#2701,#2716,#2731,#2745,#2757,#2771));
#2773=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#2774=DIRECTION('',(0.E0,0.E0,1.E0));
#2775=DIRECTION('',(1.E0,0.E0,0.E0));
#2776=AXIS2_PLACEMENT_3D('',#2773,#2774,#2775);
#2778=DIRECTION('',(0.E0,0.E0,-1.E0));
#2779=VECTOR('',#2778,3.2E0);
#2780=CARTESIAN_POINT('',(-2.5E0,0.E0,3.2E0));
#2781=LINE('',#2780,#2779);
#2782=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2783=DIRECTION('',(0.E0,0.E0,-1.E0));
#2784=DIRECTION('',(-1.E0,0.E0,0.E0));
#2785=AXIS2_PLACEMENT_3D('',#2782,#2783,#2784);
#2787=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#2788=DIRECTION('',(0.E0,0.E0,1.E0));
#2789=DIRECTION('',(-1.E0,0.E0,0.E0));
#2790=AXIS2_PLACEMENT_3D('',#2787,#2788,#2789);
#2792=DIRECTION('',(0.E0,0.E0,-1.E0));
#2793=VECTOR('',#2792,3.2E0);
#2794=CARTESIAN_POINT('',(2.5E0,0.E0,3.2E0));
#2795=LINE('',#2794,#2793);
#2796=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2797=DIRECTION('',(0.E0,0.E0,-1.E0));
#2798=DIRECTION('',(1.E0,0.E0,0.E0));
#2799=AXIS2_PLACEMENT_3D('',#2796,#2797,#2798);
#2801=CARTESIAN_POINT('',(-2.5E0,0.E0,3.2E0));
#2802=CARTESIAN_POINT('',(2.5E0,0.E0,3.2E0));
#2803=VERTEX_POINT('',#2801);
#2804=VERTEX_POINT('',#2802);
#2805=CARTESIAN_POINT('',(-2.5E0,0.E0,0.E0));
#2806=CARTESIAN_POINT('',(2.5E0,0.E0,0.E0));
#2807=VERTEX_POINT('',#2805);
#2808=VERTEX_POINT('',#2806);
#2809=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#2810=DIRECTION('',(0.E0,0.E0,-1.E0));
#2811=DIRECTION('',(-1.E0,0.E0,0.E0));
#2812=AXIS2_PLACEMENT_3D('',#2809,#2810,#2811);
#2813=CYLINDRICAL_SURFACE('',#2812,2.5E0);
#2815=ORIENTED_EDGE('',*,*,#2814,.T.);
#2817=ORIENTED_EDGE('',*,*,#2816,.T.);
#2819=ORIENTED_EDGE('',*,*,#2818,.T.);
#2821=ORIENTED_EDGE('',*,*,#2820,.F.);
#2822=EDGE_LOOP('',(#2815,#2817,#2819,#2821));
#2823=FACE_OUTER_BOUND('',#2822,.F.);
#2824=ADVANCED_FACE('',(#2823),#2813,.T.);
#2825=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#2826=DIRECTION('',(0.E0,0.E0,-1.E0));
#2827=DIRECTION('',(-1.E0,0.E0,0.E0));
#2828=AXIS2_PLACEMENT_3D('',#2825,#2826,#2827);
#2829=CYLINDRICAL_SURFACE('',#2828,2.5E0);
#2831=ORIENTED_EDGE('',*,*,#2830,.T.);
#2832=ORIENTED_EDGE('',*,*,#2820,.T.);
#2834=ORIENTED_EDGE('',*,*,#2833,.T.);
#2835=ORIENTED_EDGE('',*,*,#2816,.F.);
#2836=EDGE_LOOP('',(#2831,#2832,#2834,#2835));
#2837=FACE_OUTER_BOUND('',#2836,.F.);
#2838=ADVANCED_FACE('',(#2837),#2829,.T.);
#2839=OPEN_SHELL('',(#2824,#2838));
#2840=MANIFOLD_SOLID_BREP('',#2772);
#2841=SHELL_BASED_SURFACE_MODEL('',(#2839));
#2842=DIRECTION('',(0.E0,0.E0,-1.E0));
#2843=VECTOR('',#2842,5.000036485330E0);
#2844=CARTESIAN_POINT('',(0.E0,0.E0,5.E0));
#2845=LINE('',#2844,#2843);
#2848=DIRECTION('',(0.E0,0.E0,1.E0));
#2849=VECTOR('',#2848,2.622649730810E0);
#2850=CARTESIAN_POINT('',(0.E0,0.E0,2.886751345948E-1));
#2851=LINE('',#2850,#2849);
#2853=DIRECTION('',(0.E0,0.E0,-1.E0));
#2854=VECTOR('',#2853,3.2E0);
#2855=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#2856=LINE('',#2855,#2854);
#2858=DIRECTION('',(0.E0,0.E0,1.E0));
#2859=VECTOR('',#2858,3.2E0);
#2860=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2861=LINE('',#2860,#2859);
#2863=DIRECTION('',(0.E0,0.E0,1.E0));
#2864=VECTOR('',#2863,3.2E0);
#2865=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2866=LINE('',#2865,#2864);
#2868=DIRECTION('',(0.E0,0.E0,1.E0));
#2869=VECTOR('',#2868,1.3E0);
#2870=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#2871=LINE('',#2870,#2869);
#2873=DIRECTION('',(0.E0,0.E0,1.E0));
#2874=VECTOR('',#2873,1.8E0);
#2875=CARTESIAN_POINT('',(0.E0,0.E0,3.2E0));
#2876=LINE('',#2875,#2874);
#2878=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#2879=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#2880=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#2881=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#2880);
#2882=(CONVERSION_BASED_UNIT('DEGREE',#2881)NAMED_UNIT(#2879)PLANE_ANGLE_UNIT(
));
#2883=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#2884=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.497449142460E-3),#2878,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#2885=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#2884))GLOBAL_UNIT_ASSIGNED_CONTEXT((#2878,#2882,#2883))REPRESENTATION_CONTEXT(
'ID3','3'));
#2886=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2887=DIRECTION('',(0.E0,0.E0,1.E0));
#2888=DIRECTION('',(1.E0,0.E0,0.E0));
#2891=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2892=DIRECTION('',(0.E0,0.E0,1.E0));
#2893=DIRECTION('',(1.E0,0.E0,0.E0));
#2847=GEOMETRIC_SET('',(#2846,#2852,#2857,#2862,#2867,#2872,#2877));
#2896=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2897=DIRECTION('',(0.E0,0.E0,1.E0));
#2898=DIRECTION('',(1.E0,0.E0,0.E0));
#2901=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2902=DIRECTION('',(0.E0,0.E0,1.E0));
#2903=DIRECTION('',(1.E0,0.E0,0.E0));
#2906=SHAPE_REPRESENTATION_RELATIONSHIP('','',#2905,#2890);
#2907=SHAPE_REPRESENTATION_RELATIONSHIP('','',#2905,#2895);
#2908=SHAPE_REPRESENTATION_RELATIONSHIP('','',#2905,#2900);
#2909=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#2910=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#2909);
#2911=DESIGN_CONTEXT('',#2909,'design');
#2912=MECHANICAL_CONTEXT('',#2909,'mechanical');
#2913=PRODUCT('DIN985-M5','DIN985-M5','NOT SPECIFIED',(#2912));
#2914=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('9','LAST_VERSION',
#2913,.MADE.);
#2920=CARTESIAN_POINT('',(3.75E1,3.75E1,1.1E1));
#2921=DIRECTION('',(0.E0,0.E0,1.E0));
#2922=DIRECTION('',(1.E0,0.E0,0.E0));
#2923=AXIS2_PLACEMENT_3D('',#2920,#2921,#2922);
#2924=ITEM_DEFINED_TRANSFORMATION('','',#2904,#2923);
#2925=(REPRESENTATION_RELATIONSHIP('','',#2905,#1480)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2924)SHAPE_REPRESENTATION_RELATIONSHIP());
#2926=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2925,#2919);
#2929=CARTESIAN_POINT('',(-3.75E1,3.75E1,1.2E1));
#2930=DIRECTION('',(0.E0,0.E0,1.E0));
#2931=DIRECTION('',(1.E0,0.E0,0.E0));
#2932=AXIS2_PLACEMENT_3D('',#2929,#2930,#2931);
#2933=ITEM_DEFINED_TRANSFORMATION('','',#2904,#2932);
#2934=(REPRESENTATION_RELATIONSHIP('','',#2905,#1480)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2933)SHAPE_REPRESENTATION_RELATIONSHIP());
#2935=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2934,#2928);
#2938=CARTESIAN_POINT('',(3.75E1,-3.75E1,1.2E1));
#2939=DIRECTION('',(0.E0,0.E0,1.E0));
#2940=DIRECTION('',(1.E0,0.E0,0.E0));
#2941=AXIS2_PLACEMENT_3D('',#2938,#2939,#2940);
#2942=ITEM_DEFINED_TRANSFORMATION('','',#2904,#2941);
#2943=(REPRESENTATION_RELATIONSHIP('','',#2905,#1480)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2942)SHAPE_REPRESENTATION_RELATIONSHIP());
#2944=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2943,#2937);
#2947=CARTESIAN_POINT('',(-3.75E1,-3.75E1,1.2E1));
#2948=DIRECTION('',(0.E0,0.E0,1.E0));
#2949=DIRECTION('',(1.E0,0.E0,0.E0));
#2950=AXIS2_PLACEMENT_3D('',#2947,#2948,#2949);
#2951=ITEM_DEFINED_TRANSFORMATION('','',#2904,#2950);
#2952=(REPRESENTATION_RELATIONSHIP('','',#2905,#1480)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2951)SHAPE_REPRESENTATION_RELATIONSHIP());
#2953=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2952,#2946);
#2954=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#2955=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#2956=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#2957=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#2956);
#2958=(CONVERSION_BASED_UNIT('DEGREE',#2957)NAMED_UNIT(#2955)PLANE_ANGLE_UNIT(
));
#2959=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#2960=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-2),#2954,'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#2961=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#2960))GLOBAL_UNIT_ASSIGNED_CONTEXT((#2954,#2958,#2959))REPRESENTATION_CONTEXT(
'ID4','3'));
#10=GEOMETRIC_SET('',(#9));
#2963=SHAPE_REPRESENTATION_RELATIONSHIP('','',#1480,#2962);
#2964=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#2965=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#2964);
#2966=DESIGN_CONTEXT('',#2964,'design');
#2967=MECHANICAL_CONTEXT('',#2964,'mechanical');
#2968=PRODUCT('1_28-01_022_ASM','1_28-01_022_ASM','NOT SPECIFIED',(#2967));
#2969=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('6','LAST_VERSION',
#2968,.MADE.);
#2971=PRODUCT_CATEGORY('part','');
#2972=PRODUCT_RELATED_PRODUCT_CATEGORY('assembly','',(#2968));
#2973=PRODUCT_CATEGORY_RELATIONSHIP('','',#2971,#2972);
#2974=PRODUCT_CATEGORY('part','');
#2975=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#1473,#1687,#2913));
#2976=PRODUCT_CATEGORY_RELATIONSHIP('','',#2974,#2975);
#2977=SECURITY_CLASSIFICATION_LEVEL('unclassified');
#2978=SECURITY_CLASSIFICATION('','',#2977);
#2979=CC_DESIGN_SECURITY_CLASSIFICATION(#2978,(#1474,#1688,#2914,#2969,#1481,
#1692,#1701,#1710,#1719,#2918,#2927,#2936,#2945));
#2980=APPROVAL_STATUS('approved');
#2981=APPROVAL(#2980,'');
#2982=CC_DESIGN_APPROVAL(#2981,(#2978,#1474,#1688,#2914,#2969,#1475,#1689,#2915,
#2970));
#2983=CALENDAR_DATE(106,4,5);
#2984=COORDINATED_UNIVERSAL_TIME_OFFSET(3,0,.AHEAD.);
#2985=LOCAL_TIME(11,32,3.4E1,#2984);
#2986=DATE_AND_TIME(#2983,#2985);
#2987=APPROVAL_DATE_TIME(#2986,#2981);
#2988=DATE_TIME_ROLE('creation_date');
#2989=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#2986,#2988,(#1475,#1689,#2915,#2970));
#2990=DATE_TIME_ROLE('classification_date');
#2991=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#2986,#2990,(#2978));
#2992=PERSON('UNSPECIFIED','UNSPECIFIED',$,$,$,$);
#2993=ORGANIZATION('UNSPECIFIED','UNSPECIFIED','UNSPECIFIED');
#2994=PERSON_AND_ORGANIZATION(#2992,#2993);
#2995=APPROVAL_ROLE('approver');
#2996=APPROVAL_PERSON_ORGANIZATION(#2994,#2981,#2995);
#2997=PERSON_AND_ORGANIZATION_ROLE('creator');
#2998=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#2994,#2997,(#1474,#1688,
#2914,#2969,#1475,#1689,#2915,#2970));
#2999=PERSON_AND_ORGANIZATION_ROLE('design_supplier');
#3000=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#2994,#2999,(#1474,#1688,
#2914,#2969));
#3001=PERSON_AND_ORGANIZATION_ROLE('classification_officer');
#3002=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#2994,#3001,(#2978));
#3003=PERSON_AND_ORGANIZATION_ROLE('design_owner');
#3004=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#2994,#3003,(#2968,#1473,
#1687,#2913));
#9=TRIMMED_CURVE('BA_X',#8,(PARAMETER_VALUE(0.E0)),(PARAMETER_VALUE(1.E0)),.T.,
.UNSPECIFIED.);
#16=CIRCLE('',#15,3.E0);
#25=CIRCLE('',#24,3.E0);
#34=CIRCLE('',#33,3.E0);
#43=CIRCLE('',#42,3.E0);
#52=CIRCLE('',#51,2.15E0);
#57=CIRCLE('',#56,2.15E0);
#62=CIRCLE('',#61,2.15E0);
#67=CIRCLE('',#66,2.15E0);
#72=CIRCLE('',#71,2.15E0);
#77=CIRCLE('',#76,2.15E0);
#82=CIRCLE('',#81,2.15E0);
#87=CIRCLE('',#86,2.15E0);
#140=CIRCLE('',#139,3.E0);
#149=CIRCLE('',#148,3.E0);
#158=CIRCLE('',#157,3.E0);
#167=CIRCLE('',#166,3.E0);
#176=CIRCLE('',#175,4.649961417418E0);
#181=CIRCLE('',#180,4.649961417418E0);
#186=CIRCLE('',#185,4.649961417418E0);
#191=CIRCLE('',#190,4.649961417418E0);
#196=CIRCLE('',#195,4.649961417418E0);
#201=CIRCLE('',#200,4.649961417418E0);
#206=CIRCLE('',#205,4.649961417418E0);
#211=CIRCLE('',#210,4.649961417418E0);
#216=CIRCLE('',#215,2.5E0);
#221=CIRCLE('',#220,2.5E0);
#226=CIRCLE('',#225,2.5E0);
#231=CIRCLE('',#230,2.5E0);
#236=CIRCLE('',#235,2.5E0);
#241=CIRCLE('',#240,2.5E0);
#246=CIRCLE('',#245,2.5E0);
#251=CIRCLE('',#250,2.5E0);
#280=CIRCLE('',#279,2.15E0);
#289=CIRCLE('',#288,2.15E0);
#306=CIRCLE('',#305,2.15E0);
#315=CIRCLE('',#314,2.15E0);
#332=CIRCLE('',#331,2.15E0);
#341=CIRCLE('',#340,2.15E0);
#358=CIRCLE('',#357,2.15E0);
#367=CIRCLE('',#366,2.15E0);
#384=CIRCLE('',#383,2.5E0);
#389=CIRCLE('',#388,2.5E0);
#394=CIRCLE('',#393,2.5E0);
#399=CIRCLE('',#398,2.5E0);
#404=CIRCLE('',#403,2.5E0);
#409=CIRCLE('',#408,2.5E0);
#414=CIRCLE('',#413,2.5E0);
#419=CIRCLE('',#418,2.5E0);
#456=CIRCLE('',#455,3.E0);
#461=CIRCLE('',#460,3.E0);
#474=CIRCLE('',#473,3.E0);
#479=CIRCLE('',#478,3.E0);
#492=CIRCLE('',#491,3.E0);
#497=CIRCLE('',#496,3.E0);
#510=CIRCLE('',#509,3.E0);
#515=CIRCLE('',#514,3.E0);
#665=EDGE_CURVE('',#518,#519,#16,.T.);
#667=EDGE_CURVE('',#519,#521,#20,.T.);
#669=EDGE_CURVE('',#521,#523,#25,.T.);
#671=EDGE_CURVE('',#523,#525,#29,.T.);
#673=EDGE_CURVE('',#525,#527,#34,.T.);
#675=EDGE_CURVE('',#527,#529,#38,.T.);
#677=EDGE_CURVE('',#529,#531,#43,.T.);
#679=EDGE_CURVE('',#531,#518,#47,.T.);
#683=EDGE_CURVE('',#550,#551,#52,.T.);
#685=EDGE_CURVE('',#551,#550,#57,.T.);
#689=EDGE_CURVE('',#562,#563,#62,.T.);
#691=EDGE_CURVE('',#563,#562,#67,.T.);
#695=EDGE_CURVE('',#566,#567,#72,.T.);
#697=EDGE_CURVE('',#567,#566,#77,.T.);
#701=EDGE_CURVE('',#570,#571,#82,.T.);
#703=EDGE_CURVE('',#571,#570,#87,.T.);
#707=EDGE_CURVE('',#639,#635,#91,.T.);
#709=EDGE_CURVE('',#643,#639,#461,.T.);
#711=EDGE_CURVE('',#647,#643,#95,.T.);
#713=EDGE_CURVE('',#651,#647,#515,.T.);
#715=EDGE_CURVE('',#655,#651,#99,.T.);
#717=EDGE_CURVE('',#659,#655,#497,.T.);
#719=EDGE_CURVE('',#631,#659,#103,.T.);
#721=EDGE_CURVE('',#635,#631,#479,.T.);
#732=EDGE_CURVE('',#518,#534,#107,.T.);
#734=EDGE_CURVE('',#534,#535,#140,.T.);
#736=EDGE_CURVE('',#519,#535,#135,.T.);
#747=EDGE_CURVE('',#531,#547,#111,.T.);
#749=EDGE_CURVE('',#547,#534,#144,.T.);
#761=EDGE_CURVE('',#529,#545,#115,.T.);
#763=EDGE_CURVE('',#545,#547,#149,.T.);
#775=EDGE_CURVE('',#527,#543,#119,.T.);
#777=EDGE_CURVE('',#543,#545,#153,.T.);
#789=EDGE_CURVE('',#525,#541,#123,.T.);
#791=EDGE_CURVE('',#541,#543,#158,.T.);
#803=EDGE_CURVE('',#523,#539,#127,.T.);
#805=EDGE_CURVE('',#539,#541,#162,.T.);
#817=EDGE_CURVE('',#521,#537,#131,.T.);
#819=EDGE_CURVE('',#537,#539,#167,.T.);
#832=EDGE_CURVE('',#535,#537,#171,.T.);
#853=EDGE_CURVE('',#554,#555,#176,.T.);
#855=EDGE_CURVE('',#555,#554,#181,.T.);
#859=EDGE_CURVE('',#574,#575,#186,.T.);
#861=EDGE_CURVE('',#575,#574,#191,.T.);
#865=EDGE_CURVE('',#582,#583,#196,.T.);
#867=EDGE_CURVE('',#583,#582,#201,.T.);
#871=EDGE_CURVE('',#590,#591,#206,.T.);
#873=EDGE_CURVE('',#591,#590,#211,.T.);
#877=EDGE_CURVE('',#614,#615,#216,.T.);
#879=EDGE_CURVE('',#615,#614,#221,.T.);
#883=EDGE_CURVE('',#618,#619,#226,.T.);
#885=EDGE_CURVE('',#619,#618,#231,.T.);
#889=EDGE_CURVE('',#622,#623,#236,.T.);
#891=EDGE_CURVE('',#623,#622,#241,.T.);
#895=EDGE_CURVE('',#626,#627,#246,.T.);
#897=EDGE_CURVE('',#627,#626,#251,.T.);
#901=EDGE_CURVE('',#646,#642,#255,.T.);
#903=EDGE_CURVE('',#638,#642,#456,.T.);
#905=EDGE_CURVE('',#638,#634,#259,.T.);
#907=EDGE_CURVE('',#630,#634,#474,.T.);
#909=EDGE_CURVE('',#630,#658,#263,.T.);
#911=EDGE_CURVE('',#654,#658,#492,.T.);
#913=EDGE_CURVE('',#654,#650,#267,.T.);
#915=EDGE_CURVE('',#646,#650,#510,.T.);
#926=EDGE_CURVE('',#555,#557,#275,.T.);
#928=EDGE_CURVE('',#559,#557,#289,.T.);
#930=EDGE_CURVE('',#554,#559,#271,.T.);
#942=EDGE_CURVE('',#557,#559,#280,.T.);
#954=EDGE_CURVE('',#559,#550,#293,.T.);
#957=EDGE_CURVE('',#557,#551,#284,.T.);
#980=EDGE_CURVE('',#575,#579,#301,.T.);
#982=EDGE_CURVE('',#578,#579,#315,.T.);
#984=EDGE_CURVE('',#574,#578,#297,.T.);
#996=EDGE_CURVE('',#579,#578,#306,.T.);
#1008=EDGE_CURVE('',#578,#562,#319,.T.);
#1011=EDGE_CURVE('',#579,#563,#310,.T.);
#1034=EDGE_CURVE('',#583,#587,#327,.T.);
#1036=EDGE_CURVE('',#586,#587,#341,.T.);
#1038=EDGE_CURVE('',#582,#586,#323,.T.);
#1050=EDGE_CURVE('',#587,#586,#332,.T.);
#1062=EDGE_CURVE('',#586,#566,#345,.T.);
#1065=EDGE_CURVE('',#587,#567,#336,.T.);
#1088=EDGE_CURVE('',#591,#595,#353,.T.);
#1090=EDGE_CURVE('',#594,#595,#367,.T.);
#1092=EDGE_CURVE('',#590,#594,#349,.T.);
#1104=EDGE_CURVE('',#595,#594,#358,.T.);
#1116=EDGE_CURVE('',#594,#570,#371,.T.);
#1119=EDGE_CURVE('',#595,#571,#362,.T.);
#1142=EDGE_CURVE('',#614,#598,#375,.T.);
#1144=EDGE_CURVE('',#598,#599,#384,.T.);
#1146=EDGE_CURVE('',#615,#599,#379,.T.);
#1158=EDGE_CURVE('',#599,#598,#389,.T.);
#1179=EDGE_CURVE('',#602,#603,#394,.T.);
#1181=EDGE_CURVE('',#603,#602,#399,.T.);
#1191=EDGE_CURVE('',#606,#607,#404,.T.);
#1193=EDGE_CURVE('',#607,#606,#409,.T.);
#1203=EDGE_CURVE('',#610,#611,#414,.T.);
#1205=EDGE_CURVE('',#611,#610,#419,.T.);
#1216=EDGE_CURVE('',#618,#602,#423,.T.);
#1219=EDGE_CURVE('',#619,#603,#427,.T.);
#1242=EDGE_CURVE('',#622,#606,#431,.T.);
#1245=EDGE_CURVE('',#623,#607,#435,.T.);
#1268=EDGE_CURVE('',#626,#610,#439,.T.);
#1271=EDGE_CURVE('',#627,#611,#443,.T.);
#1293=EDGE_CURVE('',#642,#643,#447,.T.);
#1296=EDGE_CURVE('',#646,#647,#451,.T.);
#1307=EDGE_CURVE('',#638,#639,#469,.T.);
#1320=EDGE_CURVE('',#634,#635,#465,.T.);
#1333=EDGE_CURVE('',#630,#631,#483,.T.);
#1348=EDGE_CURVE('',#658,#659,#487,.T.);
#1359=EDGE_CURVE('',#654,#655,#505,.T.);
#1372=EDGE_CURVE('',#650,#651,#501,.T.);
#1402=TRIMMED_CURVE('A_X',#1401,(PARAMETER_VALUE(0.E0)),(PARAMETER_VALUE(1.E0)),
.T.,.UNSPECIFIED.);
#1408=TRIMMED_CURVE('A_2',#1407,(PARAMETER_VALUE(0.E0)),(PARAMETER_VALUE(1.E0)),
.T.,.UNSPECIFIED.);
#1413=TRIMMED_CURVE('A_4',#1412,(PARAMETER_VALUE(0.E0)),(PARAMETER_VALUE(1.E0)),
.T.,.UNSPECIFIED.);
#1418=TRIMMED_CURVE('A_5',#1417,(PARAMETER_VALUE(0.E0)),(PARAMETER_VALUE(1.E0)),
.T.,.UNSPECIFIED.);
#1423=TRIMMED_CURVE('A_6',#1422,(PARAMETER_VALUE(0.E0)),(PARAMETER_VALUE(1.E0)),
.T.,.UNSPECIFIED.);
#1428=TRIMMED_CURVE('A_11',#1427,(PARAMETER_VALUE(0.E0)),(PARAMETER_VALUE
(1.E0)),.T.,.UNSPECIFIED.);
#1433=TRIMMED_CURVE('A_12',#1432,(PARAMETER_VALUE(0.E0)),(PARAMETER_VALUE
(1.E0)),.T.,.UNSPECIFIED.);
#1438=TRIMMED_CURVE('A_13',#1437,(PARAMETER_VALUE(0.E0)),(PARAMETER_VALUE
(1.E0)),.T.,.UNSPECIFIED.);
#1443=TRIMMED_CURVE('A_14',#1442,(PARAMETER_VALUE(0.E0)),(PARAMETER_VALUE
(1.E0)),.T.,.UNSPECIFIED.);
#1455=AXIS2_PLACEMENT_3D('',#1452,#1453,#1454);
#1456=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#1455,#1393),#1451);
#1460=AXIS2_PLACEMENT_3D('',#1457,#1458,#1459);
#1461=GEOMETRICALLY_BOUNDED_SURFACE_SHAPE_REPRESENTATION('',(#1460,#1403),
#1451);
#1465=AXIS2_PLACEMENT_3D('',#1462,#1463,#1464);
#1466=SHAPE_REPRESENTATION('',(#1465,#1397),#1451);
#1475=PRODUCT_DEFINITION('design','',#1474,#1471);
#1476=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 1_28-04_008.',#1475);
#1477=SHAPE_DEFINITION_REPRESENTATION(#1476,#1466);
#1478=SHAPE_DEFINITION_REPRESENTATION(#1479,#1480);
#1479=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 1_28-01_022_ASM.',#2970);
#1480=SHAPE_REPRESENTATION('',(#1486,#1697,#1706,#1715,#1724,#2923,#2932,#2941,
#2950,#4),#2961);
#1481=NEXT_ASSEMBLY_USAGE_OCCURRENCE('26','Next assembly relationship',
'1_28-04_008',#2970,#1475,$);
#1482=PRODUCT_DEFINITION_SHAPE('Placement #26',
'Placement of 1_28-04_008 with respect to 1_28-01_022_ASM',#1481);
#1494=CIRCLE('',#1493,2.65E0);
#1503=CIRCLE('',#1502,2.65E0);
#1512=CIRCLE('',#1511,5.E0);
#1517=CIRCLE('',#1516,5.E0);
#1522=CIRCLE('',#1521,5.E0);
#1531=CIRCLE('',#1530,5.E0);
#1540=CIRCLE('',#1539,2.65E0);
#1545=CIRCLE('',#1544,2.65E0);
#1567=EDGE_CURVE('',#1548,#1549,#1498,.T.);
#1569=EDGE_CURVE('',#1549,#1557,#1540,.T.);
#1571=EDGE_CURVE('',#1556,#1557,#1507,.T.);
#1573=EDGE_CURVE('',#1548,#1556,#1494,.T.);
#1584=EDGE_CURVE('',#1548,#1556,#1503,.T.);
#1587=EDGE_CURVE('',#1549,#1557,#1545,.T.);
#1597=EDGE_CURVE('',#1553,#1561,#1512,.T.);
#1599=EDGE_CURVE('',#1553,#1561,#1517,.T.);
#1613=EDGE_CURVE('',#1552,#1553,#1526,.T.);
#1616=EDGE_CURVE('',#1560,#1561,#1535,.T.);
#1618=EDGE_CURVE('',#1552,#1560,#1522,.T.);
#1629=EDGE_CURVE('',#1552,#1560,#1531,.T.);
#1656=TRIMMED_CURVE('A_1',#1655,(PARAMETER_VALUE(0.E0)),(PARAMETER_VALUE(1.E0)),
.T.,.UNSPECIFIED.);
#1669=AXIS2_PLACEMENT_3D('',#1666,#1667,#1668);
#1670=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#1669,#1651),#1665);
#1674=AXIS2_PLACEMENT_3D('',#1671,#1672,#1673);
#1675=GEOMETRICALLY_BOUNDED_SURFACE_SHAPE_REPRESENTATION('',(#1674,#1657),
#1665);
#1679=AXIS2_PLACEMENT_3D('',#1676,#1677,#1678);
#1680=SHAPE_REPRESENTATION('',(#1679),#1665);
#1689=PRODUCT_DEFINITION('design','',#1688,#1685);
#1690=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR D125T1A5_3.',#1689);
#1691=SHAPE_DEFINITION_REPRESENTATION(#1690,#1680);
#1692=NEXT_ASSEMBLY_USAGE_OCCURRENCE('27','Next assembly relationship',
'D125T1A5_3',#2970,#1689,$);
#1693=PRODUCT_DEFINITION_SHAPE('Placement #27',
'Placement of D125T1A5_3 with respect to 1_28-01_022_ASM',#1692);
#1701=NEXT_ASSEMBLY_USAGE_OCCURRENCE('28','Next assembly relationship',
'D125T1A5_3',#2970,#1689,$);
#1702=PRODUCT_DEFINITION_SHAPE('Placement #28',
'Placement of D125T1A5_3 with respect to 1_28-01_022_ASM',#1701);
#1710=NEXT_ASSEMBLY_USAGE_OCCURRENCE('29','Next assembly relationship',
'D125T1A5_3',#2970,#1689,$);
#1711=PRODUCT_DEFINITION_SHAPE('Placement #29',
'Placement of D125T1A5_3 with respect to 1_28-01_022_ASM',#1710);
#1719=NEXT_ASSEMBLY_USAGE_OCCURRENCE('30','Next assembly relationship',
'D125T1A5_3',#2970,#1689,$);
#1720=PRODUCT_DEFINITION_SHAPE('Placement #30',
'Placement of D125T1A5_3 with respect to 1_28-01_022_ASM',#1719);
#1732=CIRCLE('',#1731,3.999E0);
#1737=CIRCLE('',#1736,3.999E0);
#1742=CIRCLE('',#1741,3.999E0);
#1747=CIRCLE('',#1746,3.999E0);
#1752=CIRCLE('',#1751,2.5E0);
#1757=CIRCLE('',#1756,2.5E0);
#1762=CIRCLE('',#1761,3.999E0);
#1771=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1763,#1764,#1765,#1766,#1767,#1768,#1769,
#1770),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#1780=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1772,#1773,#1774,#1775,#1776,#1777,#1778,
#1779),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#1789=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1781,#1782,#1783,#1784,#1785,#1786,#1787,
#1788),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#1798=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1790,#1791,#1792,#1793,#1794,#1795,#1796,
#1797),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#1807=CIRCLE('',#1806,3.999E0);
#1812=CIRCLE('',#1811,3.999E0);
#1817=CIRCLE('',#1816,3.999E0);
#1822=CIRCLE('',#1821,3.999E0);
#1827=CIRCLE('',#1826,3.999E0);
#1832=CIRCLE('',#1831,3.999E0);
#1841=CIRCLE('',#1840,3.498999993922E0);
#1846=CIRCLE('',#1845,3.999E0);
#1851=CIRCLE('',#1850,5.E-1);
#1856=CIRCLE('',#1855,2.E0);
#1861=CIRCLE('',#1860,2.E0);
#1870=CIRCLE('',#1869,2.E0);
#1875=CIRCLE('',#1874,2.E0);
#1880=CIRCLE('',#1879,2.5E0);
#1885=CIRCLE('',#1884,2.5E0);
#1894=CIRCLE('',#1893,2.E0);
#1899=CIRCLE('',#1898,2.E0);
#1908=CIRCLE('',#1907,2.E0);
#1913=CIRCLE('',#1912,2.E0);
#1934=CIRCLE('',#1933,2.E0);
#1939=CIRCLE('',#1938,2.E0);
#1948=CIRCLE('',#1947,2.E0);
#1953=CIRCLE('',#1952,2.E0);
#1958=CIRCLE('',#1957,3.498999993922E0);
#1963=CIRCLE('',#1962,3.999E0);
#1968=CIRCLE('',#1967,5.E-1);
#1977=CIRCLE('',#1976,3.999E0);
#1982=CIRCLE('',#1981,3.999E0);
#1991=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1983,#1984,#1985,#1986,#1987,#1988,#1989,
#1990),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2000=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1992,#1993,#1994,#1995,#1996,#1997,#1998,
#1999),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2009=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2001,#2002,#2003,#2004,#2005,#2006,#2007,
#2008),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2018=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2010,#2011,#2012,#2013,#2014,#2015,#2016,
#2017),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2031=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2023,#2024,#2025,#2026,#2027,#2028,#2029,
#2030),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2040=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2032,#2033,#2034,#2035,#2036,#2037,#2038,
#2039),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2049=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2041,#2042,#2043,#2044,#2045,#2046,#2047,
#2048),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2058=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2050,#2051,#2052,#2053,#2054,#2055,#2056,
#2057),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2071=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2063,#2064,#2065,#2066,#2067,#2068,#2069,
#2070),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2080=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2072,#2073,#2074,#2075,#2076,#2077,#2078,
#2079),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2089=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2081,#2082,#2083,#2084,#2085,#2086,#2087,
#2088),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2098=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2090,#2091,#2092,#2093,#2094,#2095,#2096,
#2097),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2111=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2103,#2104,#2105,#2106,#2107,#2108,#2109,
#2110),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2120=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2112,#2113,#2114,#2115,#2116,#2117,#2118,
#2119),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2129=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2121,#2122,#2123,#2124,#2125,#2126,#2127,
#2128),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2138=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2130,#2131,#2132,#2133,#2134,#2135,#2136,
#2137),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2147=CIRCLE('',#2146,3.999E0);
#2156=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2148,#2149,#2150,#2151,#2152,#2153,#2154,
#2155),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2165=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2157,#2158,#2159,#2160,#2161,#2162,#2163,
#2164),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2174=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2166,#2167,#2168,#2169,#2170,#2171,#2172,
#2173),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2183=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2175,#2176,#2177,#2178,#2179,#2180,#2181,
#2182),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#2279=EDGE_CURVE('',#2190,#2199,#1762,.T.);
#2281=EDGE_CURVE('',#2190,#2191,#1732,.T.);
#2283=EDGE_CURVE('',#2191,#2193,#1737,.T.);
#2285=EDGE_CURVE('',#2196,#2193,#2147,.T.);
#2287=EDGE_CURVE('',#2196,#2197,#1742,.T.);
#2289=EDGE_CURVE('',#2197,#2199,#1747,.T.);
#2293=EDGE_CURVE('',#2232,#2233,#1752,.T.);
#2295=EDGE_CURVE('',#2233,#2232,#1757,.T.);
#2306=EDGE_CURVE('',#2191,#2202,#1789,.T.);
#2308=EDGE_CURVE('',#2202,#2193,#2183,.T.);
#2319=EDGE_CURVE('',#2190,#2201,#2129,.T.);
#2321=EDGE_CURVE('',#2201,#2191,#1798,.T.);
#2332=EDGE_CURVE('',#2196,#2204,#2009,.T.);
#2334=EDGE_CURVE('',#2204,#2197,#2058,.T.);
#2345=EDGE_CURVE('',#2197,#2205,#2049,.T.);
#2347=EDGE_CURVE('',#2205,#2199,#2098,.T.);
#2357=EDGE_CURVE('',#2199,#2200,#2089,.T.);
#2359=EDGE_CURVE('',#2200,#2190,#2138,.T.);
#2370=EDGE_CURVE('',#2209,#2259,#1771,.T.);
#2372=EDGE_CURVE('',#2259,#2211,#1780,.T.);
#2374=EDGE_CURVE('',#2202,#2211,#2187,.T.);
#2378=EDGE_CURVE('',#2201,#2209,#1802,.T.);
#2388=EDGE_CURVE('',#2249,#2251,#1807,.T.);
#2390=EDGE_CURVE('',#2215,#2251,#2031,.T.);
#2392=EDGE_CURVE('',#2249,#2215,#2000,.T.);
#2402=EDGE_CURVE('',#2251,#2253,#1812,.T.);
#2404=EDGE_CURVE('',#2217,#2253,#2071,.T.);
#2406=EDGE_CURVE('',#2251,#2217,#2040,.T.);
#2416=EDGE_CURVE('',#2253,#2255,#1817,.T.);
#2418=EDGE_CURVE('',#2255,#2257,#1822,.T.);
#2420=EDGE_CURVE('',#2207,#2257,#2111,.T.);
#2422=EDGE_CURVE('',#2253,#2207,#2080,.T.);
#2432=EDGE_CURVE('',#2257,#2259,#1827,.T.);
#2435=EDGE_CURVE('',#2257,#2209,#2120,.T.);
#2445=EDGE_CURVE('',#2259,#2261,#1832,.T.);
#2447=EDGE_CURVE('',#2211,#2261,#2156,.T.);
#2458=EDGE_CURVE('',#2272,#2273,#1846,.T.);
#2460=EDGE_CURVE('',#2255,#2273,#1972,.T.);
#2465=EDGE_CURVE('',#2248,#2249,#1977,.T.);
#2467=EDGE_CURVE('',#2248,#2272,#1836,.T.);
#2477=EDGE_CURVE('',#2268,#2269,#1841,.T.);
#2479=EDGE_CURVE('',#2269,#2273,#1968,.T.);
#2482=EDGE_CURVE('',#2268,#2272,#1851,.T.);
#2493=EDGE_CURVE('',#2269,#2268,#1958,.T.);
#2497=EDGE_CURVE('',#2244,#2245,#1856,.T.);
#2499=EDGE_CURVE('',#2245,#2244,#1861,.T.);
#2509=EDGE_CURVE('',#2240,#2241,#1870,.T.);
#2511=EDGE_CURVE('',#2240,#2244,#1865,.T.);
#2514=EDGE_CURVE('',#2241,#2245,#1889,.T.);
#2524=EDGE_CURVE('',#2264,#2265,#1880,.T.);
#2526=EDGE_CURVE('',#2265,#2264,#1885,.T.);
#2531=EDGE_CURVE('',#2241,#2240,#1875,.T.);
#2554=EDGE_CURVE('',#2220,#2264,#1917,.T.);
#2556=EDGE_CURVE('',#2220,#2221,#1894,.T.);
#2558=EDGE_CURVE('',#2221,#2225,#1899,.T.);
#2560=EDGE_CURVE('',#2225,#2265,#1903,.T.);
#2572=EDGE_CURVE('',#2225,#2223,#1908,.T.);
#2574=EDGE_CURVE('',#2223,#2220,#1913,.T.);
#2586=EDGE_CURVE('',#2229,#2221,#1921,.T.);
#2588=EDGE_CURVE('',#2229,#2237,#1948,.T.);
#2590=EDGE_CURVE('',#2237,#2227,#1939,.T.);
#2592=EDGE_CURVE('',#2227,#2223,#1925,.T.);
#2606=EDGE_CURVE('',#2227,#2235,#1934,.T.);
#2608=EDGE_CURVE('',#2235,#2229,#1953,.T.);
#2620=EDGE_CURVE('',#2232,#2235,#1929,.T.);
#2624=EDGE_CURVE('',#2233,#2237,#1943,.T.);
#2649=EDGE_CURVE('',#2273,#2272,#1963,.T.);
#2662=EDGE_CURVE('',#2261,#2248,#1982,.T.);
#2677=EDGE_CURVE('',#2213,#2249,#1991,.T.);
#2679=EDGE_CURVE('',#2261,#2213,#2165,.T.);
#2692=EDGE_CURVE('',#2204,#2215,#2062,.T.);
#2695=EDGE_CURVE('',#2203,#2196,#2018,.T.);
#2697=EDGE_CURVE('',#2203,#2213,#2022,.T.);
#2709=EDGE_CURVE('',#2205,#2217,#2102,.T.);
#2724=EDGE_CURVE('',#2200,#2207,#2142,.T.);
#2751=EDGE_CURVE('',#2193,#2203,#2174,.T.);
#2777=CIRCLE('',#2776,2.5E0);
#2786=CIRCLE('',#2785,2.5E0);
#2791=CIRCLE('',#2790,2.5E0);
#2800=CIRCLE('',#2799,2.5E0);
#2814=EDGE_CURVE('',#2804,#2803,#2777,.T.);
#2816=EDGE_CURVE('',#2803,#2807,#2781,.T.);
#2818=EDGE_CURVE('',#2807,#2808,#2786,.T.);
#2820=EDGE_CURVE('',#2804,#2808,#2795,.T.);
#2830=EDGE_CURVE('',#2803,#2804,#2791,.T.);
#2833=EDGE_CURVE('',#2808,#2807,#2800,.T.);
#2846=TRIMMED_CURVE('PL1',#2845,(PARAMETER_VALUE(0.E0)),(PARAMETER_VALUE(1.E0)),
.T.,.UNSPECIFIED.);
#2852=TRIMMED_CURVE('A_2',#2851,(PARAMETER_VALUE(0.E0)),(PARAMETER_VALUE(1.E0)),
.T.,.UNSPECIFIED.);
#2857=TRIMMED_CURVE('A_4',#2856,(PARAMETER_VALUE(0.E0)),(PARAMETER_VALUE(1.E0)),
.T.,.UNSPECIFIED.);
#2862=TRIMMED_CURVE('A_3',#2861,(PARAMETER_VALUE(0.E0)),(PARAMETER_VALUE(1.E0)),
.T.,.UNSPECIFIED.);
#2867=TRIMMED_CURVE('A_5',#2866,(PARAMETER_VALUE(0.E0)),(PARAMETER_VALUE(1.E0)),
.T.,.UNSPECIFIED.);
#2872=TRIMMED_CURVE('A_6',#2871,(PARAMETER_VALUE(0.E0)),(PARAMETER_VALUE(1.E0)),
.T.,.UNSPECIFIED.);
#2877=TRIMMED_CURVE('A_7',#2876,(PARAMETER_VALUE(0.E0)),(PARAMETER_VALUE(1.E0)),
.T.,.UNSPECIFIED.);
#2889=AXIS2_PLACEMENT_3D('',#2886,#2887,#2888);
#2890=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#2889,#2840),#2885);
#2894=AXIS2_PLACEMENT_3D('',#2891,#2892,#2893);
#2895=MANIFOLD_SURFACE_SHAPE_REPRESENTATION('',(#2894,#2841),#2885);
#2899=AXIS2_PLACEMENT_3D('',#2896,#2897,#2898);
#2900=GEOMETRICALLY_BOUNDED_SURFACE_SHAPE_REPRESENTATION('',(#2899,#2847),
#2885);
#2904=AXIS2_PLACEMENT_3D('',#2901,#2902,#2903);
#2905=SHAPE_REPRESENTATION('',(#2904),#2885);
#2915=PRODUCT_DEFINITION('design','',#2914,#2911);
#2916=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR DIN985-M5.',#2915);
#2917=SHAPE_DEFINITION_REPRESENTATION(#2916,#2905);
#2918=NEXT_ASSEMBLY_USAGE_OCCURRENCE('31','Next assembly relationship',
'DIN985-M5',#2970,#2915,$);
#2919=PRODUCT_DEFINITION_SHAPE('Placement #31',
'Placement of DIN985-M5 with respect to 1_28-01_022_ASM',#2918);
#2927=NEXT_ASSEMBLY_USAGE_OCCURRENCE('32','Next assembly relationship',
'DIN985-M5',#2970,#2915,$);
#2928=PRODUCT_DEFINITION_SHAPE('Placement #32',
'Placement of DIN985-M5 with respect to 1_28-01_022_ASM',#2927);
#2936=NEXT_ASSEMBLY_USAGE_OCCURRENCE('33','Next assembly relationship',
'DIN985-M5',#2970,#2915,$);
#2937=PRODUCT_DEFINITION_SHAPE('Placement #33',
'Placement of DIN985-M5 with respect to 1_28-01_022_ASM',#2936);
#2945=NEXT_ASSEMBLY_USAGE_OCCURRENCE('34','Next assembly relationship',
'DIN985-M5',#2970,#2915,$);
#2946=PRODUCT_DEFINITION_SHAPE('Placement #34',
'Placement of DIN985-M5 with respect to 1_28-01_022_ASM',#2945);
#2962=GEOMETRICALLY_BOUNDED_SURFACE_SHAPE_REPRESENTATION('',(#10),#2961);
#2970=PRODUCT_DEFINITION('design','',#2969,#2966);
ENDSEC;
END-ISO-10303-21;