Structure:
1,5 mm thick steel sheet drawn-columns bearing frame; drawn-columns are fixed and welded to die-cast aluminum joints. 25 mm pitch drilling scheme; roof and plinth fixed to structure.
Side and back panels:
1,5 mm thick steel sheet; polyurethane sealing gasket; fixed to structure.
Internal plate:
2 mm thick galvanised steel sheet (Sendzimir), with front or side installation by means of sliding guides; adjustable depth.
Solid door:
1,8 mm thick steel sheet; polyurethane sealing gasket; 20×20 mm pre-drilled tubular frame. 100° standard opening with reversible right hinges. Standard central locking systems with double-comb tool insert and 4 anchor points. Other configurations are available.
Transparent door:
Same characteristics as solid door, but it is provided with a tempered glass porthole. BY SEPARATED ORDERING: 1,5 mm thick steel sheet internal door.
Cable entry flange:
1,5 mm steel sheet; it consists in 2 or 3 parts, with neoprene cable-tie gasket.
Earthing:
M6 pins to be welded on structure, doors and panels.
Painting:
Thermosetting powders.
Material:
1,5/1,8 mm thick carbon steel sheet.
Standard colours:
RAL7035 textured - Plinth: RAL7009 textured.
IP55
IK10
Technical data subject to change without notice
