Casing:
1,5 mm thick stainless-steel; welded monobloc structure; open back panel, roof and bottom completely closed.
Internal plate:
2,5 mm thick galvanised steel sheet (Sendzimir); front installation.
Solid door:
1,5 mm steel sheet; polyurethane sealing gasket; 20x20 mm pre-drilled tubular frame. 110° standard opening with reversible right hinges. Standard central locking systems with double-comb tool insert and 4 anchor points. Other configurations are available.
Earthing:
M6 pins to be welded on structure and doors.
Finish:
Fine scotch brite medium satin, 240 grit.
Material:
1,5 mm thick AISI 304 stainless-steel. In AISI 316 stainless-steel on request. NB To be combined with DRC-A cabinets in in-line settings
IP66 for internal use (for external use contact our technical department at ufficiotecnico@zanardo.com)
IK10 impact resistance degree according to IEC EN 62208
Technical data subject to change without notice
