DRC/SP (SOLID DOOR - WITHOUT PLATE)

DRC-SP

Structure:

1,5 mm thick steel sheet drawn-columns bearing frame; drawn-columns are fixed and welded to die-cast aluminum joints. 25 mm pitch drilling scheme; roof and plinth fixed to structure.

Side and back panels:

1,5 mm thick steel sheet; polyurethane sealing gasket; fixed to structure.

Internal plate:

2 mm thick galvanised steel sheet (Sendzimir), with front or side installation by means of sliding guides; adjustable depth.

Solid door:

1,8 mm thick steel sheet; polyurethane sealing gasket; 20x20 mm pre-drilled tubular frame. 100° standard opening with reversible right hinges. Standard central locking systems with double-comb tool insert and 4 anchor points. Other configurations are available.

Cable entry flange:

1,5 mm steel sheet; it consists in 2 or 3 parts, with neoprene cable-tie gasket.

Earthing:

M6 pins to be welded on structure, doors and panels.

Painting:

Thermosetting powders.

Material:

1,5/1,8 mm thick carbon steel sheet.

Standard colours: RAL7035 textured - Plinth: RAL7009 textured

IP66 for internal use (for external use contact our technical department at ufficiotecnico@zanardo.com)

IK10 impact resistance degree according to IEC EN 62208 

NEMA12

technical data subject to change without notice