DRCP (TRASPARENT DOOR - INTERNAL PLATE)

DRC-P

Structure:

1,5 mm thick steel sheet drawn-columns bearing frame; drawn-columns are fixed and welded to die-cast aluminum joints. 25 mm pitch drilling scheme; roof and plinth fixed to structure.

Side and back panels:

1,5 mm thick steel sheet; polyurethane sealing gasket; fixed to structure.

Internal plate:

2 mm thick galvanised steel sheet (Sendzimir), with front or side installation by means of sliding guides; adjustable depth.

Transparent door:

Same characteristics as solid door, but it is provided with a tempered glass porthole. BY SEPARATED ORDERING: 1,5 mm thick steel sheet internal door.

Cable entry flange:

1,5 mm steel sheet; it consists in 2 or 3 parts, with neoprene cable-tie gasket.

Earthing:

M6 pins to be welded on structure, doors and panels.

Painting:

Thermosetting powders.

Material:

1,5/1,8 mm thick carbon steel sheet.

Standard colours: RAL7035 textured - Plinth: RAL7009 textured

IP66 for electrical cabinets with 1 door and for internal use (for external use contact our technical department at ufficiotecnico@zanardo.com)

IP55 for electrical cabinets with 2 doors

IK10 impact resistance degree according to IEC EN 62208 

NEMA12

Technical data subject to change without notice