VFR-A Monobloc cabinets; bottom base with cable entry flange, side panels and roof are welded; back panel fixed with screws. Available with solid or transparent door, with or without internal door. Adjustable 2,5 mm FeZn internal plate. Plinth application configuration.
Casing:
1,5 stainless-steel monobloc cabinet with welded side panels, roof and base; internal profiles 25 mm pitch drilling scheme.
Back panel:
1,5 mm thick stainless-steel; polyurethane sealing gasket; fixed to case.
Internal plate:
2,5 mm thick galvanised steel sheet (Sendzimir), with front installation by means of sliding guides; adjustable depth.
Transparent door (ONLY FOR VERTICAL CONFIGURATIONS):
Same features as solid door, but it is provided with a tempered glass porthole. BY SEPARATED ORDERING: 1,5 mm thick stainless-steel internal door.
Cable entry flange:
1,5 mm steel sheet; it consists in 2 or 3 parts, with neoprene cable-tie gasket.
Earthing:
M6 pins to be welded on structure, back panel and door.
Finish:
Fine scotch brite medium satin, 240 grit.
Material:
1,5 mm thick AISI 304 stainless-steel. In AISI 316 stainless-steel on request.
IP66 for internal use (for external use contact our technical department at ufficiotecnico@zanardo.com)
IK10 impact resistance degree according to IEC EN 62208
NEMA12
Technical data subject to change without notice
