DRCP-A (TRASPARENT DOOR - INTERNAL PLATE)

Structure:

1,5 mm thick stainless-steel drawn-columns bearing frame; drawn-columns are fixed and welded to die-cast aluminum joints. 25 mm pitch drilling scheme; roof and base fixed to structure.

Side and back panels:

1,5 mm thick stainless-steel; polyurethane sealing gasket; fixed to structure.

Internal plate:

2 mm thick galvanised steel sheet (Sendzimir), with front or side installation by means of sliding guides; adjustable depth.

Transparent door:

Same characteristics as solid door, but it is provided with a tempered glass porthole. BY SEPARATED ORDERING: 1,5 mm thick stainless-steel internal door.

Cable entry flange:

1,5 mm stainless-steel; it consists in 2 or 3 parts, with neoprene cable-tie gasket

Earthing:

M6 pins to be welded on structure, doors and panels

Finish:

Fine scotch brite medium satin, 240 grit.

Material:

1,5/1,8 mm thick AISI 304 stainless-steel. In AISI 316 stainless-steel on request.

IP66 for internal use (for external use contact our technical department at ufficiotecnico@zanardo.com)

IK10 impact resistance degree according to IEC EN 62208 

NEMA12

Technical data subject to change without notice