Structure:
1,5 mm thick stainless-steel drawn-columns bearing frame; drawn-columns are fixed and welded to die-cast aluminum joints. 25 mm pitch drilling scheme; roof and base fixed to structure.
Side and back panels:
1,5 mm thick stainless-steel; polyurethane sealing gasket; fixed to structure.
Internal plate:
2 mm thick galvanised steel sheet (Sendzimir), with front or side installation by means of sliding guides; adjustable depth.
Solid door:
1,8 mm thick stainless-steel; polyurethane sealing gasket; 20x20 mm pre-drilled tubular frame. 100° standard opening with reversible right hinges. Standard central locking systems with double-comb tool insert and 4 anchor points. Other configurations are available.
Transparent door:
Same characteristics as solid door, but it is provided with a tempered glass porthole. BY SEPARATED ORDERING: 1,5 mm thick stainless-steel internal door.
Cable entry flange:
1,5 mm stainless-steel; it consists in 2 or 3 parts, with neoprene cable-tie gasket
Earthing:
M6 pins to be welded on structure, doors and panels
Finish:
Fine scotch brite medium satin, 240 grit.
Material:
1,5/1,8 mm thick AISI 304 stainless-steel. In AISI 316 stainless-steel on request.
IP66 for internal use (for external use contact our technical department at ufficiotecnico@zanardo.com)
IK10 impact resistance degree according to IEC EN 62208
NEMA12
Technical data subject to change without notice
