DRC-A - page 112 Modular cabinets system for in-line configurations. Completely welded drawcolumns structure; bottom base with cable entry flange, roof, side and back panels fixed with screws. Available with solid or transparent door, with or without internal door. Adjustable 2,5 mm FeZn internal plate. Plinth application configuration.
Structure:
1,5 mm thick stainless-steel drawn-columns bearing frame; drawn-columns are fixed and welded to die-cast aluminum joints. 25 mm pitch drilling scheme; roof and base fixed to structure.
Side and back panels:
1,5 mm thick stainless-steel; polyurethane sealing gasket; fixed to structure.
Internal plate:
2 mm thick galvanised steel sheet (Sendzimir), with front or side installation by means of sliding guides; adjustable depth.
Transparent door:
Same characteristics as solid door, but it is provided with a tempered glass porthole. BY SEPARATED ORDERING: 1,5 mm thick stainless-steel internal door.
Cable entry flange:
1,5 mm stainless-steel; it consists in 2 or 3 parts, with neoprene cable-tie gasket
Earthing:
M6 pins to be welded on structure, doors and panels
Finish:
Fine scotch brite medium satin, 240 grit.
Material:
1,5/1,8 mm thick AISI 304 stainless-steel. In AISI 316 stainless-steel on request.
IP66 for internal use (for external use contact our technical department at ufficiotecnico@zanardo.com)
IK10 impact resistance degree according to IEC EN 62208
NEMA12
Technical data subject to change without notice
