KA: Economic modular cabinet system with solid door, suitable for in-line settings. Solid drawn-columns structure is welded directly on bottom panel with cable entry flange and on roof. Lateral and back panels are fixed with screws; adjustable 2,5 mm FeZn internal plate. Plinth application configuration. Same accessories as DRC system.
Structure:
1,5 mm thick steel sheet drawn-columns bearing frame, welded on roof and bottom. 25 mm pitch drilling scheme
Side and back panels:
1,5 mm thick steel sheet; polyurethane sealing gasket; fixed to structure.
Internal plate:
2 mm thick galvanised steel sheet (Sendzimir), with front or side installation by means of sliding guides; adjustable depth.
Solid door:
1,8 mm thick steel sheet; 20x20 mm pre-drilled tubular frame; polyurethane sealing gasket. 100° standard opening with reversible right hinges. Standard central locking systems with double-comb tool insert and 4 anchor points. Other configurations are available.
Cable entry flange:
1,5 mm steel sheet; it consists in 2 or 3 parts, with neoprene cable-tie gasket.
Earthing:
M6 pins to be welded on structure, doors and panels.
Painting:
Thermosetting powders.
Material: 1,5/1,8 mm thick carbon steel sheet.
Standard colours:
RAL7035 textured - Plinth: RAL7009 textured
IP66 for internal use (for external use contact our technical department at ufficiotecnico@zanardo.com)
IK10 impact resistance degree according to IEC EN 62208
NEMA12
Technical data subject to change without notice
